Size:
1.25 Mb
Download

QUICK START GUIDE

DishDrawerTM dishwasher (Classic)

NZ AU US CA

Keep this document handy for easy reference.

For detailed information on the features of your dishwasher, see your ‘User guide’.

Before using your dishwasher, make sure you read the full ‘User guide’, with special attention to the ‘Safety and warnings’ section.

For contact information or if you require service, assistance or replacement parts, see the end of this document or your ‘Service & warranty’ booklet.

Your model

 

 

 

 

Note: each drawer in

 

 

 

 

 

DD60DCW7

 

double models has its

DD60DCX7

 

own controls and can

DD60DCM7

 

DD24DC(T)B7

 

run independently of

DD24DC(H)(T)X7

 

the other drawer.

DD24DC(T)W7

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

DD60SC(T)W7

DD60SC(T)X7

DD60SCTM7

DD24SC(T)B7

DD24SC(H)(T)X7

DD24SC(T)W7

Operating instructions - Starting a wash

 

 

 

1

Discard scraps

4

 

 

Add detergent and check rinse

 

 

 

 

aid

 

Scrape large food particles off

 

 

 

 

 

 

 

Fill the detergent dispenser (a) with

 

(e.g. bones, fruit stones) and

 

 

 

 

 

 

 

powdered detergent and close the

 

remove any foreign objects

 

 

 

 

 

 

 

dispenser door.

 

(e.g. toothpicks, strings, paper).

a

 

 

 

 

 

Important!

 

 

 

 

 

2

 

 

 

c

Do not place liquid detergent or tablets in

Load dishes carefully

 

b

the detergent dispenser.

 

 

 

 

 

 

If the indicator on its plug (c) glows

 

 

 

 

 

 

To help with wash performance,

 

 

 

bright red, refill the rinse aid

 

arrange dishes so they are

d

 

 

dispenser (b) with liquid rinse aid.

 

evenly spaced and not nesting.

 

 

Make sure you then refit the rinse

 

 

 

 

 

aid plug back into its original

 

 

 

 

 

position.

 

 

 

 

 

If using a tablet, place it in the

 

 

 

 

 

cutlery basket (d) or at the bottom

3

 

 

 

 

of the drawer.

Check spray arm(s)

 

 

 

 

 

 

 

 

 

Ensure there are no items

blocking the spray arm(s) from 5 Select wash rotating.

Power the dishwasher on then select wash program.

6

Start wash or set Delay start

Close the drawer and press .

Wash program controls

Wash program indicators

These show which program is selected.

Wash

program

STANDARD PROGRAMS - designed to clean and dry your dishes

 

 

 

selector

HEAVY

NORMAL

FAST

DELICATE

 

RINSE

 

 

Press to

Heavily soiled

Dishes with

Lightly soiled

Lightly soiled

 

Prevents

scroll

 

pots, pans and

normal

dishes.

and heat

 

odors

through the

 

dishes.

soils for

 

sensitive

 

and soils

wash

 

 

 

optimum

 

crockery.

 

drying on

programs.

 

 

 

 

performance.

 

 

 

dishes.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

ECO PROGRAMS - designed to clean your dishesenergy-efficiently

 

 

 

 

 

 

 

 

 

 

 

HEAVY ECO

NORMAL

FAST ECO

DELICATE

 

 

 

 

ECO

 

ECO

 

 

 

Heavily soiled

Normal soiled

Lightly soiled,

Lightly soiled,

 

 

 

everyday

dishes for

non-greasy

non-greasy

 

 

 

dishes.

optimum

dishes.

and heat

 

 

 

 

water and

 

sensitive

 

 

 

 

energy use.

 

crockery.

 

 

 

 

 

 

 

 

 

ECO selector and indicator

Press if you’d like the program

to use less energy. The indicator will glow red when an Eco program has been selected.

If you require enhanced drying, we do not recommend selecting an Eco program.

Main controls and display

Time remaining

 

 

 

 

 

 

 

 

 

 

 

 

Fault symbols (if these appear, see section

Stage of wash program

 

 

 

 

 

 

 

 

 

‘If there is a fault’ in your ‘User guide’)

 

 

 

 

 

 

 

 

 

Keylock or Childlock is activated

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

(see ‘During and after

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

the wash’)

Delay start mode

Power on/off

Press to turn the dishwasher on or off.

Opening the drawer will automatically turn the dishwasher on for 30 seconds.

Cancel wash/Cancel Delay start

Pressto cancel a wash that has already started or to cancel the Delay start setting.

If there is any water in the drawer,

it will automatically drain before the dishwasher turns off.

Start/Pause

Press to start, pause, or resume a wash.

After pausing a wash, wait for 3 beeps before opening the drawer. Forcing it open in mid-cyclemay cause damage or injury.

Set Delay start

1Press and hold untilappears on the display, then

release. You are now in Delay start mode.

2Press briefly again, repeating until the display shows the number of hours you want to delay the start of a wash by (1 to 12 hours).

You have now set Delay start. The wash will start once the delay time

is over, provided the drawer is closed.

Keylock

Keylock disables all the buttons

– helpful when cleaning the dishwasher.

To activate, press and hold until you hearone beep (3 seconds). The display will show.

To cancel, press and hold until

its symbol disappears from the display.

Childlock

Childlock locks the drawer and disables all the buttons, preventing unauthorized use by children.

To activate, press and hold until you heartwo beeps (5 seconds). The display will show.

To cancel, press and hold until its symbol disappears from the display.

continued over

During and after the wash

As the wash progresses, the display will count down the minutes remaining and show what stage the program is at (different programs will go through different stages). When the program has finished, the display will show and the dishwasher will beep six times.

 

 

 

 

These lines may remain on after

 

 

 

 

the program has finished to

 

 

 

 

indicate that the drying fan is

 

 

 

min

still running.

 

 

 

 

Dirty dishes Pre-rinsingWashing

Rinsing

Drying

Clean dishes -

 

 

 

 

program has finished

 

You may notice the following noises at the end of the wash. These are all part of normal operation: In double models, both drawers may be draining simultaneously.

The drying fan may continue to run after a wash program has finished for a set time or until the drawer is opened. The fan assists with drying and uses negligible amounts of energy.

For best drying results, we recommend unloading the dishes once they have cooled.

Dos and don’ts of loading

Sharp or pointed items must be placed

Protruding items will stop the

horizontally or with sharp edges/points

internal lid of the dishwasher from

facing down to avoid risk of injury.

sealing properly, which could result

 

in a service call.

A neatly arranged load with evenly

Overcrowding reduces wash

spaced dishes helps wash performance.

performance.

Ensure there is enough space between

If plates and cutlery are nesting,

plates. Mix spoons, knives and forks

they are less likely to be cleaned

within the cutlery basket to prevent

well.

them from nesting.

 

Ensure that water reaches all items on

Dishware is blocking water from

the adjustable racks.

reaching items on the adjustable

 

racks.

Preference options

You can change the setting of these options to suit your preferences or circumstances. We recommend selecting the most suitable settings before you start using your dishwasher.

Option

Rinse aid

Water

Open drawer auto

Beeps at end of

Closed drawer autolock

Clean dish indication

softener*

power-on

wash

 

 

 

 

 

 

 

 

Regulates the amount of

Refer to

Your dishwasher

Your dishwasher

When this setting is on,

 

When

this setting is on,

 

 

 

rinse aid dispensed. Reduce

the ‘Water

is factory-setto

is factory-setto

the drawer will

 

will remain in the

 

this setting if there is excess

softener’

automatically

beep six times

automatically lock 30

 

display after a wash to

 

 

 

foam after a wash. Increase

section of

power on for 30

at the end of a

seconds after it’s closed.

remind you that the dishes

What

this setting if dishes are wet

the ‘User

seconds whenever

wash.

It can then be unlocked by

are clean. This is useful if

or streaky after a wash.

guide’ for

you open the

You can turn this

pressing

(unless Keylock

you prefer storing clean

does

 

details.

drawer.

setting off.

or Childlock is also activated).

dishes in your dishwasher,

it do?

 

 

 

You can turn this

 

Useful in boats or motor

taking out only what you

 

 

 

 

 

 

 

setting off.

 

homes.

 

 

need. When the last clean

 

 

 

 

 

 

 

 

dish has been removed,

 

 

 

 

 

 

 

 

press

to return to

 

 

 

 

 

 

 

 

normal operating mode.

How to change the setting of an option

1CHECK & OPEN

Check that there is no wash underway, press , then open the drawer.

2ENTER MENU & SCROLL TO OPTION

To enter the menu: press theselector on top first with one finger, then thebutton on the front with another finger, hold both until one long beep sounds, then release.

You are now in the Rinse aid option of the preference options menu.

If you want to change the Rinse aid setting, go to step 3 now.

If you want to change the setting of another option, you will need to scroll to that option first.

To scroll to the next option: press. To know which option you’re in, watch the letters in the display (see table below). When you have scrolled to the end of the sequence, it will start again with Rinse aid (after the lower tone).

Option

Rinse aid

 

 

Water

 

 

Open drawer

 

 

Beeps at end

 

 

Closed drawer

 

 

Clean dish

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

softener*

 

 

auto power-on

 

 

of wash

 

autolock

 

indication

 

 

 

 

 

 

 

 

 

 

Which option

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

am I in?

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Possible

1 to 5

 

0 to 5

 

On or Off

 

On or Off

 

On or Off

 

On or Off

 

settings

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Example

 

 

 

 

 

 

On

 

 

 

 

On

 

 

 

 

On

 

 

 

 

On

 

 

 

4 indicators lit = setting is 4

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Off

 

 

 

 

Off

 

 

 

Off

 

 

 

 

Off

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

3CHANGE SETTING

Press to change the setting within an option. For example, to change the Rinse aid setting from 4 (factory default) to 2, you need to press3 times.

4SAVE SETTING & QUIT MENU

Press . This will save the new setting and quit the preference options menu.

*This option is disabled on models without water softener. It appears in the sequence of options but cannot be adjusted.

For more info

For detailed information on the features of your dishwasher

For warranty information

If you…

have any questions or comments

need a Fisher & Paykel authorized technician to service your product

need replacement parts or accessories want to register your product

see your ‘User guide’

see your ‘Service and warranty’ booklet

see your ‘Service and warranty’ booklet or contact us

NZ

toll-free,24/7

0800 372 273

www.fisherpaykel.co.nz

AU

toll-free,24/7

1300 650 590

www.fisherpaykel.com.au

USA

toll-free,24/7

1 888 936 7872

www.fisherpaykel.com

CA

toll-free,24/7

1 888 936 7872

www.fisherpaykel.ca

590191A 10.11