Operation & Installation Guide
MFFS2054DF84DF18DFE0809
ENGLISH
Model 2054DF
Model 2084DF
Model 2118DF
DIGITAL
Read These Instructions Very Carefully!
Home and Office Security Safes
Index
Overview of Your Safe ............................................. |
Page 1 |
Programming Preparation ....................................... |
Page 2 |
Step 1. Installing Batteries |
|
Step 2. Opening Safe with Override Key |
|
Programming a Passcode ......................................... |
Page 3 |
LCD Display Menu |
|
Step 3. Programming a Passcode |
|
Opening & Closing Digital Safe ............................... |
Page 4 |
Open Safe with Passcode & Key |
|
Close Safe |
|
Open Safe with Override Key |
|
Additional Features: Shelves.................................... |
Page 5 |
Additional Features: Bolt-Down Kit ......................... |
Page 6 |
Consumer Affairs ................................................... |
Page 8 |
Use, Care and Maintenance ..................................... |
Page 10 |
For Your Protection
•Do not remove the Serial Number tag from the safe.
•Store Emergency Override Keys away from (NEVER INSIDE) safe.
•Record all Safe Identification Numbers on Safe Identification Record (last page).
•Save this manual and NEVER keep it inside the safe.
Overview of Your Safe
WELCOME!
Your new First Alert® Fire Theft Safe™ will provide years of safe and secure protection for your valuables, important documents and other personal items. All First Alert® safes are designed and built using the highest manufacturing standards to ensure maximum user satisfaction under a variety of conditions. With proper care, your First Alert® safe will provide “Peace of Mind” for many years to come.
Thank you and Enjoy!
The following list outlines the items and quantities of each included with your new safe. Please carefully check the list to confirm all items have been received. If any item is missing, then please contact Consumer Affairs
@ 1-800-223-8566.
Package Contents
All Models
1 First Alert® Firesafe
1Operation & Installation Guide
2Companion Entry Keys
Models 2054DF (only)
1 Bolt-Down Kit Including:
1 Mounting Template
4 Break-off Bolts
4 Washers
1 Removable Shelf
Models 2084DF / 2118DF (only)
1 Adjustable Shelf
4 Shelf Support Clips
Important: DO NOT RETURN SAFE TO STORE
If you are missing parts, have difficulty programming your safe or have any other questions pertaining to its proper use and care, DO NOT RETURN your safe to the store. Please contact Consumer Affairs at 1-800-223-8566 (USA & Canada) for assistance.
Home and Office Security Safes |
1 |
|
|
Programming Preparation
Step 1. Installing Batteries
BATTERY
The digital keypad is powered by 4 “AA” batteries which COMPARTMENT must be installed before you can begin programming
your personal code. For your convenience, we have provided you with 4 “AA” batteries. For best results and depending on use, we recommend replacing the batteries at least once a year.
1.Locate battery compartment to the right of the digital keypad.
2.To open the compartment, press firmly in on the battery cover and slide it to the right for removal.
3.Install 4 new “AA” batteries in the battery compartment. Make sure they are installed in the correct direction as marked on the inside of the battery compartment.
4.Once the batteries are installed properly, replace the cover by sliding it back on from the left.
Important: BATTERY REMOVAL
If the batteries are removed or fail, the keypad memory will NOT be erased.
Step 2. Open Safe with Override Key (square top)
You will need access to the inside of the safe door to begin programming. You must use the Emergency Override Key (square top) to open the door for the first time.
1. Insert the Emergency Override Key (square top) in the
lock, turn to the left (counterclockwise) and pull the door open.
Important: TURN OVERRIDE KEY TO LEFT ONLY
When using the Emergency Override Key, you must ONLY TURN IT TO THE LEFT. Turning it to the right may cause key to become stuck in the cylinder and may cause damage to the lock.
2
Programming A Passcode
LCD Display Menu
Your new Digital Firesafe features an LCD display to assist in programming and operating your safe. A menu of the codes is as follows:
Ready to enter your passcode
Passcode successfully programmed
Correct passcode entered
Incorrect passcode entered
Batteries (“AA”) must be replaced
Step 3. Programming a Passcode
Use the digital keypad to program your own 3 to 8 digit passcode. You may choose or change your personal passcode at any time by following these steps:
1.Locate the memory button marked on the inside of the door.
2.Using a pen or other blunt tip, quickly push and release the memory button.
3.After you hear a “beep”, the LCD display will read “OPEN” and you may begin entering your personal code (from 3 to 8 numbers) followed by the # button.
4.Next, you will hear a longer “beep” and the
LCD display will read “CODE”, indicating that your personal code has been successfully programmed and can now be used to open your safe.
LCD
DISPLAY
MEMORY
BUTTON
Important: SECURITY LOCKOUT PERIODS
For added security, the safe will automatically “Lockout” entry for 5 minutes after three attempts to open with an invalid passcode. After three more invalid attempts within this time period, a one-hour “lockout” period will begin. During these “Lockout” periods, entry MUST BE MADE using the emergency override key.
Home and Office Security Safes |
3 |
|
|