PRODUCT INFORMATION
MFT table connector
Item No. 484 455 (pack of 1)
2 are needed to connect 2 tables together
PRODUCT DESCRIPTION:
The MFT table connector can be used to connect 2 or more Multi-Function Tables to get a larger work surface. These strong metal bars with 4 set screws slide into the “T” track spanning the tables to be joined as shown below.
SUGGESTED USAGE:
For big jobs where a large surface with very versatile clamping options is needed. MFT’s can also be joined together and be used with a long guide rail
(e.g. FS 1900/2) to increase the cutting capacity of the MFT.
BENEFITS:
•Large work surface that supports big work pieces – secure working environment can enhance working speed and results.
•Increases cutting capacity of single MFT’s and makes them more versatile – better use of existing equipment
•Sturdy construction and high quality materials – long product lifetime saves on replacement costs.
RELATED PRODUCTS:
•MFT 1080 (item no. 492 652): Large, strong, sturdy and portable work table for shop-level precision on the jobsite.
•MFT 800 (item no. 492 651): Smaller version of the MFT 1080, but with all of the same features.
•Replacement top (item no. 489 396 for MFT 1080; item no. 486 565 for MFT 800)
The MFT connectors fit the “T” slots around the perimeter of the MFT
Two 1080 MFT’s joined together side by side to form a large work surface
The MFT connectors (on the outside) are thicker than the guide rail connectors
Two 1080 MFT’s joined together end to end to form a long work surface
AVAILABLE THROUGH:
Your Festool dealer, or Festool USA/Tooltechnic Systems, LLC 140 Los Carneros Way, Goleta, CA 93117
Phone: 888.337.8600 • Fax: 888.550.6425
www.festoolusa.com
Loading...