Loading...
Champion™ 600
(This is the model name for warranty claims)
p/n 233-0100-000 (120V)
SERVICE MANUAL
ATTENTION:
WARRANTY SERVICE PROCEDURES
The Champion 600 Amplifier is not available for warranty field service. However; any
Champion 600 that is presented for warranty service should be tested for bad tubes. If the defect is due to a failed tube, and the tube warranty has expired, the consumer/dealer will be responsible for tube replacement costs. If the tube warranty has not expired contact FMIC Customer Service for replacement tubes. If the defect is not tube related please contact FMIC Customer Service to arrange for a replacement amplifier.
Fender Musical Instruments Corporation, 8860 East Chaparral Road Suite 100 Scottsdale, AZ 85250
Issued: October, 2006
2
Champion™ 600
(This is the model name for warranty claims)
June, 2007
IMPORTANT NOTICE
•Copyright © 2006 FMIC. All rights reserved. All information contained herein is CONFIDENTIAL and PROPRIETARY and is the property of Fender® Musical Instruments Corporation. It is not to be sold or assigned to another party and is disclosed solely for use by Fender Authorized Service Centers for purposes of product service and maintenance. All information is not to be disclosed to others without the expressed permission of Fender® Musical Instruments Corporation. All
specifications are subject to change without notice. This information and any copies produced electronically or otherwise must be surrendered upon demand of Fender® Musical Instruments Corporation.
•Parts marked with two asterisks (**) indicate the required use of that specific part. This is necessary for RELIABILITY and SAFETY requirements.
DO NOT USE A SUBSTITUTE!
PARTS LIST CODES
|
|
The description codes used in the itemized Parts Lists are defined below: |
||||
CAPACITOR CODES |
|
HARDWARE CODES |
||||
|
||||||
CAP AE |
= |
Aluminum Electrolytic |
|
BLX |
= |
Black Oxide |
CAP CA |
= |
Ceramic Axial |
|
CR |
= |
Chrome Plated |
CAP CD |
= |
Ceramic Disk |
|
HWH |
= |
Hex Washer Head |
CAP CR |
= |
Ceramic Radial |
|
M |
= |
Machine Screw |
CAP MPF |
= |
Metalized Polyester Film |
|
NI |
= |
Nickel Plated |
CAP MY |
= |
Mylar |
|
OHP |
= |
Oval Head Phillips |
CAP PFF |
= |
Polyester Film/Foil |
|
PB |
= |
Particle Board |
|
|
|
|
PHP |
= |
Pan Head Phillips |
RESISTOR CODES |
|
PHPS |
= Pan Head Phillips Sems |
|||
RES CC |
= |
Carbon Comp |
|
SMA |
= Sheet Metal "A" Point |
|
RES CF |
= |
Carbon Film |
|
SMB |
= Sheet Metal "B" Point |
|
RES FP |
= |
Flame Proof |
|
SS |
= |
Stainless Steel |
RES MF |
= |
Metal Film |
|
TF |
= |
Thread Forming |
RES MOX |
= |
Metal Oxide |
|
ZI |
= |
Zinc Plated |
RES WW |
= |
Wire Wound |
|
|
|
|
|
|
|
|
|
|
|
3
Champion™ 600
(This is the model name for warranty claims)
SPECIFICATIONS
Model Name: |
|
Champion 600 |
|
|
Release Number: |
|
PR 722 |
|
|
Part Numbers |
CHAMPION 600 120V |
233-0100-000 |
||
|
CHAMPION 600 120V DS |
233-0100-900 |
||
|
CHAMPION 600 110V TW DS |
233-0101-900 |
||
|
CHAMPION 600 240V AUS DS |
233-0103-900 |
||
|
CHAMPION 600 230V UK DS |
233-0104-900 |
||
|
CHAMPION 600 230V ARG DS |
233-0105-900 |
||
|
CHAMPION 600 230V EUR DS |
233-0106-900 |
||
|
CHAMPION 600 100V JPN DS |
233-0107-900 |
||
|
CHAMPION 600 220V ROK DS |
233-0109-900 |
||
Power Requirement: |
|
25 W |
|
|
Fuses: |
|
F 1A, 250V for 100V versions |
|
|
|
|
F 1A, 250V for 120V versions |
|
|
|
|
F 500mA, 250V for 240V versions |
|
|
|
|
F 500 mA, 250V for 230V versions |
|
|
Input Sensitivity: |
|
25 mV (volume at maximum for full power |
|
|
Power Output: |
|
5W RMS into 4 ohms @ < 5%THD, 1000Hz |
||
Impedances |
Input: |
>1M Ohms |
|
|
Speaker Complement: |
|
6” , 4 ohm |
|
|
Dimensions |
Height: |
11 in |
(28 cm) |
|
|
Width: |
12 in |
(12 cm) |
|
|
Depth: |
7.5 in |
(19 cm) |
|
Weight: |
|
15 lbs |
(7 kg) |
|
|
Product specifications are subject to change without notice |
|||
|
|
|
|
|
Loading...