Fellowes PS25, PS30, PS35, PS45, PS40 User Manual

...
0 (0)
A
B
C
D
E
F
Models: PS25 PS50
PS25 PS50 Plus PS30 PS55 PS30 Plus PS55CC PS40 PS45 DM-3 PS35
Operating Instructions Mode d’emploi Instrucciones de funcionamiento Bedienungsanleitung Bedieningsinstructies Istruzioni sul funzionamento
Powershred
®
Personal Series
A
B
C
D
E
F
2
Safety Instructions
• Read and save these instructions.
• Follow all warnings and instructions marked on the product.
• Always turn off and unplug the machine before moving, cleaning, or conduct other than normal operation.
• Operate shredder from the power source indicated on the serial label or power supply. If you are not sure of the type of power available, consult your dealer or a power company.
• Power cord should be easily accessible because it serves as the disconnect switch. If the power cord is damaged, call the number listed under “Contact for Service”.
• If the shredder does not come with a wastebasket, be certain the basket you select provides a stable base for the shredder. Tall or narrow baskets may be top heavy and unstable.
• Keep loose objects (jewelry, ties, long hair) away from shredder.
• CAUTION: Do not insert aerosol cleaners or lubricants into or around the machine. Some agents may combust, causing serious injury.
• Empty wastebasket frequently.
• Do not place shredder near water, over a radiator or a heat register.
• Do not rest anything on the power cord. Do not place machine where people will walk on the cord.
• The use of an extension cord is not recommended.
• Do not service this product yourself. An opened cover may expose you to dangerous voltage points or other risks, and will void manufacturer’s warranty.
• Do not exceed recommended sheet capacity or usage. (See “Sheet Capacity and Usage”, Table A).
• Do not shred continuous forms.
• Do not shred labels, transparencies, glossy paper, newsprint, plastic or cardboard.
• Keep out of the reach of children and pets.
• Never insert your hand or fingers into feed opening.
• Practice caution when shredding paper that contains paper clips and staples. Shredder is intended for paper only, although clips and staples will not harm the cutting system nor void the 5 year cutter warranty, but the added thickness may decrease sheet capacity.
Installation
All Models
• Where applicable, plug power cord into jack on the unit.
• Position shredder securely on basket.
• Plug power cord into a standard AC outlet with the appropriate power requirements as stated on the serial number label adhered to the bottom of the shredder.
PS25 PS30 PS50
Fits wastebaskets from 13 1/4” - 16 1/2” (337 - 419mm) wide.
• Position shredder securely over basket and extend adjustable arm so shredder solidly rests on basket edges.
A
B
C
D
E
F
3
Operation
Cleaning
Sheet Capacity and Usage
• Do not exceed recommended sheet capacity for your model.
• Folding paper to fit the entry increases the thickness and recommended capacity may be exceeded.
• Clips and staples increase the thickness and may decrease sheet capacity.
PS25 PS25 Plus PS30 PS30 Plus PS35/PS40
• Follow instructions for sheet capacity. (See Table A)
• Position paper over entry.
• Depress power switch to the ON (I) position to start cutting system.
• Return the power switch to the OFF (O) position to stop cutting system.
PS50 PS50 Plus PS55* PS55CC* DM-3*/PS45*
• Follow instructions for sheet capacity. (See Table A)
• Depress the power switch to the ON (I) position to activate the standby mode. *Green Ready light will come on if model has indicator lights.
• Shredder automatically starts when paper is placed in the entry and stops when finished shredding.
All Models
• Unplug the unit from the wall before cleaning.
• Housing can be cleaned with a cloth, dampened with a mild soap and water solution.
US 20# Paper 64 GSM 80 GSM 80 GSM
Model: Sheets per Pass Sheets per Pass Sheets per Pass Sheets per Pass
120V/50Hz 100V/50Hz 230V/50Hz 240V/50Hz
PS55CC 3 N/A N/A N/A PS25 5 7 5 5 PS25 Plus 5 7 5 5 PS 30 5 7 5 5 PS30 Plus 5 7 5 5 PS35 & PS40 5 7 5 5 PS50 5 7 5 5 PS50 Plus 5 7 5 5 PS55 (non-100/120V) N/A N/A 5 5 PS55
(100/120V) 77N/A N/A
DM-3/PS45 7 7 N/A N/A
TABLE A
Different paper weights and electrical currents will affect capacity.
Loading...
+ 5 hidden pages