Fellowes PB 400, PB 500, PB 300 User Manual

5 (1)
Fellowes PB 400, PB 500, PB 300 User Manual

Operating Instructions

Mode d’emploi

Instrucciones de funcionamiento

Model/Modèle/Modelo:

PB 300

 

PB 400

 

PB 500

A

B

C

Equipment Parts

Assembly

A

B

C

1.

Punching Handle (PB 300/400 only)

 

 

 

To Assemble your PB 300/400 Binding

2.

Binding Handle

 

 

 

 

 

 

 

 

Machine

3.

Sheet Supporter/Adjustable Comb Guide Selector

 

 

 

 

 

 

1. There are two (2) handles supplied with the machine.

4.

Adjustable Margin Guide

 

 

 

 

5.

Punching Area

 

 

 

 

Attach the longer (Punching Handle) to the right side

6.

Binding Area (Metal Rakes)

 

 

 

 

of the machine by firmly pressing square hole of

7.

Waste Paper Drawer

 

 

 

 

handle onto square shaft. To operate correctly, the

8.

Left Side Cover

 

 

 

 

handle should be positioned as illustrated. NOTE: If

9.

Right Side Cover

 

 

 

 

the handle is not positioned as illustrated it will not

10. Disengagable Punching Dies (PB 400/500 only)

 

 

 

punch.

11. Margin Depth Setter (PB 400/500 only)

 

 

 

Once the handle is fully attached, secure it by

12. Binding Lock Dial (PB 400/500 only)

 

 

 

inserting the screw supplied.

13. On/Off Switch (PB 500 only)

 

 

 

 

2. Carefully attach the Right Side Cover over the

14. Punching Switch (PB 500 only)

 

 

 

 

Punching Handle.

 

 

 

 

 

 

 

3. Attach the shorter, handle (Binding Handle) to the

 

 

 

 

 

 

 

left-side of the machine by firmly pressing square

 

 

 

 

 

 

 

hole of handle onto square shaft, position as

 

 

 

 

 

 

 

illustrated. NOTE: If the handle is not positioned as

 

 

 

 

 

 

 

illustrated, it will not bind properly.

 

 

 

 

 

 

 

Secure the handle by inserting the screw supplied.

 

 

 

 

 

 

 

4. Carefully attach the Left Side Cover over the Binding

 

 

10

1

 

 

 

Handle.

 

 

 

5

 

 

 

5. To mount the Sheet Supporter/Adjustable Comb

 

 

 

 

 

 

 

 

 

3

 

6

 

 

Guide Selector, first be sure the two (2) phillips

 

 

 

 

 

screws are loose enough so the Supporter/Selector

4

 

 

 

 

9

 

 

 

 

 

 

slides easily into place. Mount Supporter/Selector

 

 

 

 

 

 

12

 

 

 

 

 

 

and secure by tightening screws.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

To Assemble your PB 500 Binding Machine

 

 

 

 

 

 

 

Follow steps 3-5 for PB 300/400 assembly instructions.

11

 

 

 

 

7

 

 

8

2

 

 

 

 

 

 

 

 

 

 

 

PB 300 & PB 400

 

 

14

3

 

 

 

 

10

 

2

 

5

 

 

 

 

 

 

 

 

13

 

4

 

 

 

11

 

 

 

9

 

 

 

 

8

 

 

 

 

 

 

 

 

6

PB 500

 

7

 

 

 

 

 

 

12

2

Loading...
+ 3 hidden pages