P-7C
Please read these instructions before use. Do not discard: keep for future reference.
fellowes.com
ENGLISH
Model P-7C
A. |
|
|
|
|
|
|
|
|
|
E. |
|
|
|
|
|
||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
||||
B. |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
||
|
|
|
|
|
|
||||||||||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|||
C. |
|
|
|
|
|
|
|
|
|
F. |
|
|
|
|
|
||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
KEY |
|
|
|
|
|||||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
A. Shredder head |
D. Bin |
F. Control switch |
||
|
|
|
|
|
|
|
|
|
|
|
|
|
B. Paper entry |
E. See safety instructions |
I |
1. |
ON |
|
|
|
|
|
|
|
|
|
|
|
|
|
C. Card entry |
|
O |
2. |
OFF |
D. |
|
|
|
|
|
|
|
|
|
|
|
R |
3. |
Reverse |
|||
|
|
|
|
|
|
|
|
|
|
||||||||
CAPABILITIES
Will shred: Paper, staples and credit cards
Will not shred: CD/DVDs, adhesive labels, continuous form paper, transparencies, newspaper, cardboard, paper clips, laminates, file folders, X-rays or plastic other than noted above
Paper shred size: |
|
Cross-Cut................................................................. |
5/32 in. x 1-7/8 in. (3.9mm x 45mm) |
Maximum: |
|
Sheets per pass.............................................................................................................. |
7* |
Cards per pass............................................................................................................... |
1* |
Paper entry width........................................................................................ |
9 in. (229mm) |
*8.5 in. x 11 in., 20 lb., (75g) paper at 120V/60 Hz, 3.0Amps; heavier paper, humidity or other than rated voltage may reduce capacity. Recommended daily usage rates: 10-20 paper passes; 5 cards. 
7 sheets per pass.
IMPORTANT SAFETY INSTRUCTIONS — Read Before Using!
•Keep away from children and pets. Keep hands away from paper entry. Always set to off or unplug when not in use.
•Keep foreign objects – gloves, jewelry, clothing, hair, etc. – away from shredder openings. If object enters top opening, switch to Reverse (R) to back out object.
•Never use aerosol products, petroleum based lubricants or other flammable products on or near shredder. Do not use canned air on shredder.
•Do not use if damaged or defective. Do not disassemble shredder. Do not place near or over heat source or water.
•Avoid touching exposed cutting blades under shredder head.
•The grounded socket-outlet shall be installed near the equipment and shall be easily accessible.
1
Loading...