Fellowes Helios 60 User Manual
Loading...
Performance Thermal Binder
HeliosTM 60
EPlease read these instructions before use.
FLire ces instructions avant utilisation.
S |
Lea estas instrucciones antes de usar la máquina. |
|
|
|
|
INDEX
LAMINATOR CONTROLS / QUICK START GUIDE |
3 |
ENGLISH |
4-7 |
FRANCAIS |
8-11 |
ESPAÑOL |
12-15 |
2
BINDING MACHINE CONTROLS
I
H / K |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
O |
||
|
|
|
|
|
|
|
|
|
|
|
|
|
|||||
|
|
|
|
|
|
|
|
|
|
|
|
|
A |
||||
|
|
|
|
|
|
|
|
|
|
||||||||
M |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
C |
|
|
|
|
|
|
|
|
|
|
|
J |
|||||
|
|
|
|
|
|
|
|
|
|||||||||
L |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|||
|
|
|
|
|
|
|
|
|
|
|
N |
||||||
|
|
|
|
|
|
|
|
|
|
||||||||
G |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
||
|
|
|
|
|
|
|
|
|
|||||||||
|
|
|
|
|
|
|
|
||||||||||
B E F D
QUICK START GUIDE
1 2 3 4
5 |
6 |
7 |
8 |
|
|
|
|
|
|
9 |
10 |
11 |
12 |
3
ENGLISH |
E |
CAPABILITIES |
|
Performance |
|
Entry width |
12” |
|
|
Binding capacity (max) |
1.2” / 600 sheets (20lb) |
|
|
Estimated heat-up time |
4 minutes |
Cool down time |
30-60 minutes |
|
|
Binding cycles |
1-10 cycles / 1-3 minutes |
|
|
Ready indication |
Light & beeps |
|
|
LED interface |
Yes |
|
|
Auto-Sense |
Yes |
Heat-Shield |
Yes |
|
|
Power Save / Auto shut-off |
Yes (30 mins) |
|
|
Multiple Document Binding |
Yes |
|
|
Technical Data |
|
Voltage / Frequency / |
|
Current(Amps) |
110-120V AC, 60Hz, 5.5A |
Wattage |
600 W |
|
|
Dimensions (HxWxD) |
20.9” x 9.4” x 3.9” |
Net weight |
5.7 lb |
Binding capacity
The maximum sheet capacity can be a single (up to 500 sheet max) or multiple documents up to approximately 600 sheets max.
Eg:
IMPORTANT SAFETY INSTRUCTIONS
CAUTION: Please read before use and keep for future reference.
When binding;
-plug the machine into an easily accessible socket.
-to prevent electrical shock - do not use the appliance close to water, do not spill water on to the appliance, power cord or wall socket.
DO ensure the machine is on a stable surface.
DO test scrap sheets and set the machine before use.
DO remove staples and other metal articles prior to binding. DO keep the machine away from heat and water sources. DO turn off the machine after each use.
DO unplug the machine when not in use for an extended period.
DO use binding covers designed for use at the appropriate settings.
DO keep away from pets, while in use.
DO NOT leave the power cord in contact with hot surfaces.
DO NOT leave power cord hanging from cupboards or shelves.
DO NOT use appliance if the power cord is damaged.
DO NOT attempt to open or otherwise repair the machine.
DO NOT exceed the machines quoted performance.
DO NOT allow children to use this machine without adult supervision.
DO NOT bind sharp or metal objects (eg: staples, paper clips).
DO NOT bind heat-sensitive documents (eg: tickets, ultrasounds etc).
DO NOT touch the heating plate while binding - it is very hot.
STORAGE & CLEANING
Unplug the machine at the wall. Allow the machine to cool.
The outside of the machine can be cleaned with a damp cloth. Do not use solvents or flammable materials to polish the machine.
4
BINDING MACHINE CONTROLS
A |
On/off switch (rear side) |
I |
Lid lock (2) |
|
|
|
|
B |
Power On button & LED |
J |
Binding channel |
|
|
|
|
C |
Binding thickness guide |
K |
Document support |
|
|
|
|
D |
Timer selection (increase) |
L |
Illuminated user interface |
|
|
|
|
E |
Timer selection (decrease) |
M |
Cooling vents |
|
|
|
|
F |
Select / OK button |
N |
Document clamp (binding) |
|
|
|
|
G |
Thickness setting / timer selection |
O |
Cooling rack |
|
|
|
|
H |
Lid |
|
|
|
|
|
|
FEATURES & TIPS
‘System-Check’ function
When switched on, the machine performs a ‘System-Check’ function. The control panel illuminates LED neons in sequence to check their operation.
‘Thermo Sense’ function
When opening the document clamp and loading documents for binding, the machine calculates the optimum binding cycle period. There is no need to manually input the cycle period.
‘Heat-Shield’ function
The document clamp operates as a ‘Heat Shield’ to prevent operators from accidentally touching the heating plate.
‘Auto-Off’ function
If the machine is not active for 30 minutes, the ‘Auto-Off’ function will place the machine into standby mode. The ’Power-On’ LED will flash red and green. To operate the machine, press the ‘Power-On’ button.
•Always put the document into the appropriate sized binding cover.
•For better results, consider including blank sheets to fill the thermal cover to capacity.
•Always test bind with a similar size and thickness of thermal covers before final process.
•Helios has an angled heater mechanism to ensure correct document alignment with the document support during the binding process.
•For best results, use Fellowes® brand supplies.
•Thermal binding covers work best with thin and uncoated types of paper. Care should be taken with thick and coated papers to ensure satisfactory results.
•If the sheets have not been glued completely to the cover, the document can be re-processed to improve the result.
•Ensure the sheets are well aligned and touching the glued spine of the thermal cover by tapping the collated document in the cover onto a flat surface. This can be done before and after the binding process.
5