Fairchild MOC8101, MOC8102, MOC8103, MOC8104, MOC8105 service manual

CNY17F-X		6-PIN DIP OPTOCOUPLERS FOR
		POWER SUPPLY APPLICATIONS
		(NO BASE CONNECTION)
MOC8101	MOC8102	MOC8103		MOC8104
MOC8105	MOC8106	MOC8107		MOC8108
CNY17F-1	CNY17F-2	CNY17F-3		CNY17F-4
FEATURES
The MOC810X and CNY17F-X devices consist of a gallium arsenide LED optically coupled
to a silicon phototransistor in a dual-in-line package.
• Closely Matched Current Transfer Ratio (CTR) Minimizes Unit-to-Unit Variation
• Narrow (CTR) Windows that Translate to a Narrow and Predictable Open			6	6
Loop Gain Window				1
• Very Low Coupled Capacitance along with No Chip to Pin 6 Base
Connection for Minimum Noise Susceptibility				1
• To order devices that are tested and marked per VDE 0884 requirements,
the suffix “.300” must be included at the end of part number. e.g. MOC8101.300
VDE 0884 is a test option.			6
APPLICATIONS				1

•Switchmode Power Supplies (Feedback Control)

•AC Line/Digital Logic Isolation

•Interfacing and coupling systems of different potentials and impedances

ABSOLUTE MAXIMUM RATINGS (TA =25°C Unless otherwise specified)

SCHEMATIC

Parameter

Symbol

Value

Unit

INPUT LED

100

mA

1

NC

6

Forward Current - Continuous

IF

Forward Current - Peak (PW = 1µs, 300pps)

IF(pk)

1

A

2

5

Reverse Voltage

VR

6

Volts

LED Power Dissipation @ TA = 25°C

PD

140

mW

3

NC

4

Derate above 25°C

1.33

mW/°C

PIN 1. ANODE

OUTPUT TRANSISTOR

2. CATHODE

Collector-Emitter Voltage

3. NO CONNECTION

VCEO

Volts

4. EMITTER

MOC8106/7/8, CNY17F-1/2/3/4

70

5. COLLECTOR

6. NO CONNECTION

MOC8101/2/3/4/5

30

Emitter-Collector Voltage

VECO

7

Volts

Detector Power Dissipation @ TA = 25°C

PD

200

mW

Derate above 25°C

2.67

mW/°C

TOTAL DEVICE

Input-Output Isolation Voltage(1)

VISO

5300

Vac(rms)

(f = 60 Hz, t = 1 min.)

Total Device Power Dissipation @ TA = 25°C

PD

260

mW

Derate above 25°C

2.94

mW/°C

Ambient Operating Temperature Range

TOPR

-55 to +100

°C

Storage Temperature Range

TSTG

-55 to +150

°C

Lead Soldering Temperature

TSOL

260

°C

(1/16” from case, 10 sec. duration)

NOTE

1. Input-Output Isolation Voltage,VISO, is an internal device dielectric breakdown rating.

2001 Fairchild Semiconductor Corporation
DS300266	9/18/01	1 OF 10	www.fairchildsemi.com

6-PIN DIP OPTOCOUPLERS FOR POWER SUPPLY APPLICATIONS (NO BASE CONNECTION)

MOC8101	MOC8102	MOC8103	MOC8104
MOC8105	MOC8106	MOC8107	MOC8108
CNY17F-1	CNY17F-2	CNY17F-3	CNY17F-4

ELECTRICAL CHARACTERISTICS (TA =25°C Unless otherwise specified)(1)

				Characteristic						Symbol		Min	Typ**	Max	Unit
		INPUT LED
		Forward Voltage (IF = 60 mA)								VF		1.0	1.4	1.65	V
		Reverse Leakage Current (VR = 5.0 V)								IR		—	0.001	10	µA
		Capacitance								C		—	18	—	pF
		OUTPUT TRANSISTOR
		Collector-Emitter Dark Current				(VCE = 10 V, TA = 25°C)				ICEO1		—	1.0	50	nA
						(VCE = 10 V, TA = 100°C)				ICEO2		—	1.0	—	µA
		Collector-Emitter Breakdown Voltage
				MOC8101/2/3/4/5			(IC = 1.0 mA)			V(BR) CEO		30	100	—	V
				MOC8106/7/8, CNY17F-1/2/3/4			(IC = 1.0 mA)					70	100	—
		Emitter-Collector Breakdown Voltage					(IE = 100 µA)			V(BR) ECO		7.0	10	—	V
		Collector-Emitter Capacitance				(f = 1.0 MHz, VCE = 0)				CCE		—	8	—	pF
		COUPLED
									MOC8101			50	—	80
									MOC8102			73	—	117
		Output Collector Current							MOC8103			108	—	173
									MOC8104			160	—	256
				(IF = 10 mA, VCE = 10 V)
									MOC8105			65	—	133
									MOC8106	(CTR)(2)		50	—	150	%
									MOC8107			100	—	300
									MOC8108			250	—	600
									CNY17F-1			40	—	80
				(IF = 10 mA, VCE = 5 V)					CNY17F-2			63	—	125
									CNY17F-3			100	—	200
									CNY17F-4			160	—	320
		Collector-Emitter Saturation Voltage
				CNY17F-1/2/3/4		(IC = 2.5 mA, IF = 10 mA)				VCE(sat)		—	—	0.4	V
				MOC8101/2/3/4/5/6/7/8	(IC = 500 µA, IF = 5.0 mA)
		Isolation Voltage				(f = 60 Hz, t = 1.0 min.)(4)				VISO		5300	—	—	Vac(rms)
		Isolation Resistance					(V		= 500 V)(4)	R	ISO	1011	—	—	1
							I-O
		Isolation Capacitance				(V	= 0, f = 1.0 MHz)(4)			C	ISO	—	0.5	—	pF
						I-O

** All typicals at TA = 25°C

www.fairchildsemi.com

2 OF 10

9/18/01 DS300266

6-PIN DIP OPTOCOUPLERS FOR POWER SUPPLY APPLICATIONS (NO BASE CONNECTION)

MOC8101	MOC8102	MOC8103	MOC8104
MOC8105	MOC8106	MOC8107	MOC8108
CNY17F-1	CNY17F-2	CNY17F-3	CNY17F-4

TRANSFER CHARACTERISTICS (TA =25°C Unless otherwise specified)

	AC Characteristic		Test Conditions	Symbol	Min	Typ**	Max	Unit
	NON-SATURATED SWITCHING TIME			ton	—	2	10
	Turn-on Time	CNY17F-1/2/3/4 Only	(RL = 100 1, IC = 2 mA)					µs
	Turn-off Time	CNY17F-1/2/3/4 Only	(VCC = 10 V)	toff	—	3	10
	Turn-On Time			ton	—	2	—
	All Devices	(IC = 2.0 mA, VCC = 10 V, RL = 100 1)(3)
								µs
	Turn-Off Time			toff	—	3	—
	All Devices	(IC = 2.0 mA, VCC = 10 V, RL = 100 1)(3)
	Rise Time			tr	—	1	—
	All Devices	(IC = 2.0 mA, VCC = 10 V, RL = 100 1)(3)
								µs
	Fall Time			tf	—	2	—
	All Devices	(IC = 2.0 mA, VCC = 10 V, RL = 100 1)(3)
	SATURATED SWITCHING TIMES
	Turn-on Time		(IF = 20 mA, VCE = 0.4 V)		—	—	5.5
	CNY17F-1			ton				µs
	CNY17F-2
	CNY17F-3		(IF = 10 mA, VCE = 0.4 V)		—	—	8.0
	CNY17F-4
	Rise Time		(IF = 20 mA, VCE = 0.4 V)		—	—	4.0
	CNY17F-1
								µs
	CNY17F-2			tr
	CNY17F-3		(IF = 10 mA, VCE = 0.4 V)		—	—	6.0
	CNY17F-4
	Turn-off Time		(IF = 20 mA, VCE = 0.4 V)		—	—	34
	CNY17F-1
								µs
	CNY17F-2			toff
	CNY17F-3		(IF = 10 mA, VCE = 0.4 V)		—	—	39
	CNY17F-4
	Fall Time		(IF = 20 mA, VCE = 0.4 V)
	CNY17F-1				—	—	20
	CNY17F-2		(IF = 10 mA, VCE = 0.4 V)	tf				µs
	CNY17F-3				—	—	24
	CNY17F-4

** All typicals at TA = 25°C

NOTES:

1.Always design to the specified minimum/maximum electrical limits (where applicable).

2.Current Transfer Ratio (CTR) = IC/IF x 100%.

3.For test circuit setup and waveforms, refer to Figure 7.

4, For this test, Pins 1 and 2 are common, and Pins 4 are 5 are common.

DS300266

9/18/01

3 OF 10

www.fairchildsemi.com