PART : Special Version
FFSD 6PR 12S
Please read this manual carefully
before using the dishwasher and
Keep this manual for future reference.
CONTENTS
4 USING YOUR DISHWASHER
4 Control Panel
6 Water Softener
7 Preparing And Loading Dishes
10Function Of The Rinse Aid And Detergent
11Filling The Rinse Aid Reservoir
12Filling The Detergent Dispenser
13 PROGRAMMING THE DISHWASHER
13 Wash Cycle Table
14 Starting A Cycle Wash
14Changing The Program Mid-cycle
15Forget To Add A Dish?
16 ERROR CODES
17 TECHNICAL INFORMATION
NOTE:
If you cannot solve the problems by yourself, please ask for help from a professional technician.
The manufacturer, following a policy of constant development and updating of the product, may make modifications without giving prior notice.
If lost or out-of-date, you can receive a new user manual from the manufacturer or responsible vendor.
QUICK USER GUIDE
Please read the corresponding content on the instruction manual for detailed
operating method.
1Install the dishwasher
(Please check the section 5 “INSTALLATION INSTRUCTION ” of PART : Generic Version.)
|
Inside |
|
Outside |
||
|
|
||||
2 Removing the larger residue on the |
3 Loading the baskets |
||||
cutlery |
|
|
|
|
|
|
|
|
|
|
|
4 Filling the dispenser |
5 Selecting a program and running |
the dishwasher
3
USING YOUR DISHWASHER
Control Panel
1 |
7 |
2 |
3
6 5 4 3
Operation (Button)
1 Power Press this button to turn on your dishwasher, the screen lights up.
Press the Delay button to increase the delay start time. Delay a
2 Delay cycle for up to 24 hours in one-hour increments. After setting the delay time, press the Start/Pause button to start.
Press this button to select the appropriate washing program,
3 Program
the selected program indicator will be lit..
Press the button to start the selected washing program or pause
4 Start /Pause
the working program.
Display
Intensive
5 Program For heaviest soiled crockery, and normally soiled pots, pans, indicator
dishes etc. With dried-on food.
4
|
|
Normal |
|
|
|
|
For normally soiled loads, such as pots, plates, glasses and |
||
|
|
lightly soiled pans. |
||
|
|
ECO |
|
|
5 |
Program |
This is standard program, it is suitable to clean normally |
||
soiled tableware and it is the most efficient program in |
||||
|
indicator |
|||
|
terms of its combined energy and water consumption for |
|||
|
|
|||
|
|
that type of tableware. |
||
|
|
Glass |
|
|
|
|
For lightly soiled crockery and glass. |
||
|
|
90 Min |
|
|
|
|
For normally soiled loads that need quick wash. |
||
|
|
Rapid |
|
|
|
|
A shorter wash for lightly soiled loads that do not |
||
|
|
need drying. |
||
|
|
|
|
|
|
|
Rinse Aid |
|
|
|
|
If the “ |
” indicator is lit, it means the dishwasher is low |
|
6 |
Warning |
on dishwasher rinse aid and requires a refill. |
||
|
|
|||
|
indicator |
Salt |
|
|
|
|
|
||
|
|
If the “ |
” indicator is lit, it means the dishwasher is low |
|
|
|
on dishwasher salt and needs to be refilled. |
||
|
|
|
||
7 |
Screen |
To show the reminding time, delay time, error code etc. |
||
|
|
|
|
|
5
Water Softener
The water softener must be set manually, using the water hardness dial.
The water softener is designed to remove minerals and salts from the water, which would have a detrimental or adverse effect on the operation of the appliance.
The more minerals there are, the harder your water is.
The softener should be adjusted according to the hardness of the water in your area. Your local Water Authority can advise you on the hardness of the water in your area.
Adjusting salt consumption
The dishwasher is designed to allow for adjustment in the amount of salt consumed based on the hardness of the water used. This is intended to optimise and customise the level o f salt consumption.
Please follow the steps below for adjustment in salt consumption.
1.Switch on the appliance;
2.Press the Start/Pause button for more than 5 seconds to start the water softener set model within 60 seconds after the appliance was switched on;
3.Press the Start/Pause button to select the proper set according to your local environment, the sets will change in the following sequence: H1->H2->H3->H4->H5->H6;
4.Press the Start/Pause to end the set up model.
|
WATER HARDNESS |
|
|
|
Salt consumption |
|||||
|
|
|
|
|
|
|
|
Water softener level |
||
German |
French |
British |
Mmol/l |
(gram/cycle) |
||||||
|
||||||||||
dH |
|
fH |
Clarke |
|
|
|||||
|
|
|
|
|||||||
|
|
|
|
|
|
|
|
|
|
|
0 |
- 5 |
0 |
- 9 |
0 |
- |
6 |
0 - 0.94 |
H1 |
0 |
|
|
|
|
|
|
|
|
||||
6 - 11 |
10 |
- 20 |
7 - 14 |
1.0 - 2.0 |
H2 |
9 |
||||
|
|
|
|
|
|
|
|
|
|
|
12 |
- 17 |
21 |
- 30 |
15 |
- |
21 |
2.1 - 3.0 |
H3 |
12 |
|
|
|
|
|
|
|
|
|
|
|
|
18 |
- 22 |
31 |
- 40 |
22 |
- |
28 |
3.1 - 4.0 |
H4 |
20 |
|
|
|
|
|
|
|
|
|
|
|
|
23 |
- 34 |
41 |
- 60 |
29 |
- |
42 |
4.1 - 6.0 |
H5 |
30 |
|
|
|
|
|
|
|
|
|
|
|
|
35 |
- 55 |
61 |
- 98 |
43 |
- |
69 |
6.1 - 9.8 |
H6 |
60 |
|
|
|
|
|
|
|
|
|
|
|
|
1°dH=1.25 °Clarke=1.78 °fH=0.178mmol/l
The manufactory setting: H3
Contact your local water board for information on the hardness of your water supply.
6
Loading...