Extron electronic RGB 324, RGB 340, RGB 326 User Manual

0 (0)
Extron electronic RGB 324, RGB 340, RGB 326 User Manual

Specifications — RGB 324, RGB 326, RGB 340

Video

Gain ...............................................

Unity (0.7V p-p), (0.8V p-p) 15% with 3dB peaking, (0.9V p-p) 30% with 6dB

 

peaking

Bandwidth ....................................

300 MHz (-3dB)

Video input

Number/signal type ...................

1 analog RGBHV, RGBS, RGsB, RsGsBs

Connectors ....................................

1 9-pin D male analog for MBC/LBC cable

Minimum/maximum levels ......

Analog .......

0.3V to 1.45V p-p with no offset at unity gain

Impedance ....................................

75 ohms or Hi Z, switchable (set to 75 ohms if no local monitor is connected)

Horizontal frequency ..................

15 kHz to 100 kHz (optimum 15 kHz to 62 kHz)

Vertical frequency .......................

30 Hz to170 Hz

Video output

Number/signal type ...................

1 analog RGBHV, RGBS, RGsB, RsGsBs

Connectors ....................................

5 BNC female

Minimum/maximum levels ......

Analog .......

0.7V to 0.9V p-p (internal jumper-selectable) with 0.7Vp-p input and

 

 

peaking

Impedance ....................................

75 ohms

 

Return loss ....................................

-48dB @ 5 MHz

Sync

Input type .....................................

RGBHV, RGBS, RGsB, RsGsBs

Output type ..................................

RGBHV, RGBS, RGsB, RsGsBs; TTL buffered to RGB 320 control unit

Input level .....................................

3.0V to 5.0V p-p (referenced to ground)

Output level ..................................

4.0V to 5.0V p-p

Input impedance ..........................

10 kohms

Output impedance .......................

75 ohms

Max propagation delay ...............

45 nS

Max. rise/fall time .......................

3.9 nS

Polarity ..........................................

Positive, negative

Audio — buffered to RGB 320

Gain ...............................................

Unbalanced 0dB, balanced +6dB

Frequency response .....................

20 Hz to 20 kHz, ±0.05dB

THD + Noise ................................

0.03% @ 1 kHz, 0.3% @ 20 kHz at rated maximum output drive

S/N ................................................

>90dB at rated maximum output (17dBu), balanced

Stereo channel separation ...........

>95dB @ 1 kHz to 20 kHz

Audio input — buffered to RGB 320

Number/signal type ...................

1 stereo, unbalanced; 1.0Vrms (+4dBu), 20 Hz to 20 kHz

Connectors ....................................

3.5 mm stereo jack (2 channel), unbalanced; tip (L), ring (R), sleeve (ground)

Impedance ....................................

>10 kohms unbalanced, DC coupled

Minimum level .............................

100mV

Maximum level ............................

+8.5dBu

Audio output — buffered to RGB 320

Number/signal type ...................

1 buffered, stereo (2 channel), balanced/unbalanced

Connectors ....................................

1 3.5 mm captive screw connector, 10 pole

Impedance ....................................

50 ohms unbalanced, 100 ohms balanced

Gain error ......................................

±0.1dB channel to channel

Maximum level

 

(into RGB 320 audio input) ..........

> +16dBm, balanced at stated %THD+N

1-2 RGB 324, RGB 326, RGB 340 • Specifications

Loading...
+ 1 hidden pages