Extron electronic 468xi, 464xi, 468 Mxi, RGB 460xi, 460xiDual User Manual

0 (0)
Extron electronic 468xi, 464xi, 468 Mxi, RGB 460xi, 460xiDual User Manual

User’s Manual

 

 

Extron Electronics, USA

 

Extron Electronics, Europe

 

Extron Electronics, Asia

 

Extron Electronics, Japan

 

 

1230 South Lewis Street

 

Beeldschermweg 6C

 

135 Joo Seng Road, #04-01

 

Daisan DMJ Building 6F

 

 

Anaheim, CA 92805

 

3821 AH Amersfoort

 

PM Industrial Building

 

3-9-1 Kudan Minami

 

 

USA

 

The Netherlands

 

Singapore 368363

 

Chiyoda-ku, Tokyo 102-0074 Japan

www.extron.com

 

714.491.1500

 

+31.33.453.4040

 

+65.6383.4400

 

+81.3.3511.7655

 

Fax 714.491.1517

 

Fax +31.33.453.4050

 

Fax +65.6383.4664

 

Fax +81.3.3511.7656

 

 

 

 

RGB 460xi , 460xi Dual,

464xi , 468xi , and 468 Mxi

Wall and Floorbox Mountable Interfaces

with Euro Channel versions

68-542-01 Rev. D

Printed in the USA

06 03

© 2003 Extron Electronics. All rights reserved.

Precautions

Safety Instructions • English

Warning

 

This symbol is intended to alert the user of important operating and maintenance (servicing) instructions in the literature provided with the equipment.

This symbol is intended to alert the user of the presence of uninsulated dangerous voltage within the product's enclosure that may present a risk of electric shock.

Caution

Read Instructions • Read and understand all safety and operating instructions before using the equipment.

Retain Instructions • The safety instructions should be kept for future reference.

Follow Warnings • Follow all warnings and instructions marked on the equipment or in the user information.

Avoid Attachments • Do not use tools or attachments that are not recommended by the equipment manufacturer because they may be hazardous.

Power sources • This equipment should be operated only from the power source indicated on the product. This equipment is intended to be used with a main

power

system with a grounded (neutral) conductor. The third (grounding)

pin is

a safety feature, do not attempt to bypass or disable it.

 

Power disconnection • To remove

power from the equipment safely, remove all

power

cords from the rear of the

equipment, or the desktop power module

(if

detachable), or from the power source receptacle (wall plug).

Power cord protection • Power cords should be routed so that they are not likely to be stepped on or pinched by items placed upon or against them.

Servicing • Refer all servicing to qualified service personnel. There are no userserviceable parts inside. To prevent the risk of shock, do not attempt to service this equipment yourself because opening or removing covers may expose you to dangerous voltage or other hazards.

Slots and openings • If the equipment has slots or holes in the enclosure, these are provided to prevent overheating of sensitive components inside. These openings must never be blocked by other objects.

Lithium battery • There is a danger of explosion if battery is incorrectly replaced. Replace it only with the same or equivalent type recommended by the manufacturer. Dispose of used batteries according to the manufacturer's instructions.

Consignes de Sécurité • Français

Ce symbole sert à avertir l’utilisateur que la documentation fournie avec le matériel contient des instructions importantes concernant l’exploitation et la maintenance (réparation).

Ce symbole sert à avertir l’utilisateur de la présence dans le boîtier de l’appareil de tensions dangereuses non isolées posant des risques d’électrocution.

Attention

Lire les instructions• Prendre connaissance de toutes les consignes de sécurité et d’exploitation avant d’utiliser le matériel.

Conserver les instructions• Ranger les consignes de sécurité afin de pouvoir les consulter à l’avenir.

Respecter les avertissements • Observer tous les avertissements et consignes marqués sur le matériel ou présentés dans la documentation utilisateur.

Eviter les pièces de fixation • Ne pas utiliser de pièces de fixation ni d’outils non recommandés par le fabricant du matériel car cela risquerait de poser certains dangers.

Avertissement

Alimentations• Ne faire fonctionner ce matériel qu’avec la source d’alimentation indiquée sur l’appareil. Ce matériel doit être utilisé avec une alimentation principale comportant un fil de terre (neutre). Le troisième contact (de mise à la terre) constitue un dispositif de sécurité : n’essayez pas de la contourner ni de la désactiver.

Déconnexion de l’alimentation• Pour mettre le matériel hors tension sans danger, déconnectez tous les cordons d’alimentation de l’arrière de l’appareil ou du module d’alimentation de bureau (s’il est amovible) ou encore de la prise secteur.

Protection du cordon d’alimentation • Acheminer les cordons d’alimentation de manière à ce que personne ne risque de marcher dessus et à ce qu’ils ne soient pas écrasés ou pincés par des objets.

Réparation-maintenanceFaire exécuter toutes les interventions de réparationmaintenance par un technicien qualifié. Aucun des éléments internes ne peut être réparé par l’utilisateur. Afin d’éviter tout danger d’électrocution, l’utilisateur ne doit pas essayer de procéder lui-même à ces opérations car l’ouverture ou le retrait des couvercles risquent de l’exposer à de hautes tensions et autres dangers.

Fentes et orifices • Si le boîtier de l’appareil comporte des fentes ou des orifices, ceux-ci servent à empêcher les composants internes sensibles de surchauffer. Ces ouvertures ne doivent jamais être bloquées par des objets.

Lithium Batterie • Il a danger d'explosion s'll y a remplacment incorrect de la batterie. Remplacer uniquement avec une batterie du meme type ou d'un ype equivalent recommande par le constructeur. Mettre au reut les batteries usagees conformement aux instructions du fabricant.

Sicherheitsanleitungen • Deutsch

Dieses Symbol soll dem Benutzer in der im Lieferumfang enthaltenen Dokumentation besonders wichtige Hinweise zur Bedienung und Wartung (Instandhaltung) geben.

DiesesSymbolsolldenBenutzerdaraufaufmerksam machen, daß im Inneren des Gehäuses dieses ProduktesgefährlicheSpannungen,dienichtisoliert sind und die einen elektrischen Schock verursachen können, herrschen.

Achtung

Lesen der Anleitungen • Bevor Sie das Gerät zum ersten Mal verwenden, sollten Sie alle Sicherheits-und Bedienungsanleitungen genau durchlesen und verstehen.

Aufbewahren der Anleitungen • Die Hinweise zur elektrischen Sicherheit des Produktes sollten Sie aufbewahren, damit Sie im Bedarfsfall darauf zurückgreifen können.

Befolgen der Warnhinweise • Befolgen Sie alle Warnhinweise und Anleitungen auf dem Gerät oder in der Benutzerdokumentation.

Keine Zusatzgeräte • Verwenden Sie keine Werkzeuge oder Zusatzgeräte, die nicht ausdrücklich vom Hersteller empfohlen wurden, da diese eine Gefahrenquelle darstellen können.

Instrucciones de seguridad • Español

Este símbolo se utiliza para advertir al usuario sobre instrucciones importantes de operación y mantenimiento (o cambio de partes) que se desean destacar en el contenido de la documentación suministrada con los equipos.

Este símbolo se utiliza para advertir al usuario sobre la presencia de elementos con voltaje peligroso sin protección aislante, que puedan encontrarse dentro de la caja o alojamiento del producto, y que puedan representar riesgo de electrocución.

Precaucion

Leer las instrucciones • Leer y analizar todas las instrucciones de operación y seguridad, antes de usar el equipo.

Conservar las instrucciones • Conservar las instrucciones de seguridad para futura consulta.

Obedecer las advertencias • Todas las advertencias e instrucciones marcadas en el equipo o en la documentación del usuario, deben ser obedecidas.

Evitar el uso de accesorios • No usar herramientas o accesorios que no sean especificamente recomendados por el fabricante, ya que podrian implicar riesgos.

Vorsicht

Stromquellen • Dieses Gerät sollte nur über die auf dem Produkt angegebene Stromquelle betrieben werden. Dieses Gerät wurde für eine Verwendung mit einer Hauptstromleitung mit einem geerdeten (neutralen) Leiter konzipiert. Der dritte Kontakt ist für einen Erdanschluß, und stellt eine Sicherheitsfunktion dar. Diese sollte nicht umgangen oder außer Betrieb gesetzt werden.

Stromunterbrechung • Um das Gerät auf sichere Weise vom Netz zu trennen, sollten Sie alle Netzkabel aus der Rückseite des Gerätes, aus der externen Stomversorgung (falls dies möglich ist) oder aus der Wandsteckdose ziehen.

Schutz des Netzkabels • Netzkabel sollten stets so verlegt werden, daß sie nicht im Weg liegen und niemand darauf treten kann oder Objekte daraufoder unmittelbar dagegengestellt werden können.

Wartung • Alle Wartungsmaßnahmen sollten nur von qualifiziertem Servicepersonal durchgeführt werden. Die internen Komponenten des Gerätes sind wartungsfrei. Zur Vermeidung eines elektrischen Schocks versuchen Sie in keinem Fall, dieses Gerät selbst öffnen, da beim Entfernen der Abdeckungen die Gefahr eines elektrischen Schlags und/oder andere Gefahren bestehen.

Schlitze und Öffnungen • Wenn das Gerät Schlitze oder Löcher im Gehäuse aufweist, dienen diese zur Vermeidung einer Überhitzung der empfindlichen Teile im Inneren. Diese Öffnungen dürfen niemals von anderen Objekten blockiert werden.

Litium-Batterie • Explosionsgefahr, falls die Batterie nicht richtig ersetzt wird. Ersetzen Sie verbrauchte Batterien nur durch den gleichen oder einen vergleichbaren Batterietyp, der auch vom Hersteller empfohlen wird. Entsorgen Sie verbrauchte Batterien bitte gemäß den Herstelleranweisungen.

Advertencia

Alimentación eléctrica • Este equipo debe conectarse únicamente a la fuente/tipo de alimentación eléctrica indicada en el mismo. La alimentación eléctrica de este equipo debe provenir de un sistema de distribución general con conductor neutro a tierra. La tercera pata (puesta a tierra) es una medida de seguridad, no puentearia ni eliminaria.

Desconexión de alimentación eléctrica • Para desconectar con seguridad la acometida de alimentación eléctrica al equipo, desenchufar todos los cables de alimentación en el panel trasero del equipo, o desenchufar el módulo de alimentación (si fuera independiente), o desenchufar el cable del receptáculo de la pared.

Protección del cables de alimentación • Los cables de alimentación eléctrica se deben instalar en lugares donde no sean pisados ni apretados por objetos que se puedan apoyar sobre ellos.

Reparaciones/mantenimiento • Solicitar siempre los servicios técnicos de personal calificado. En el interior no hay partes a las que el usuario deba acceder. Para evitar riesgo de electrocución, no intentar personalmente la reparación/ mantenimiento de este equipo, ya que al abrir o extraer las tapas puede quedar expuesto a voltajes peligrosos u otros riesgos.

Ranuras y aberturas • Si el equipo posee ranuras o orificios en su caja/alojamiento, es para evitar el sobrecalientamiento de componentes internos sensibles. Estas aberturas nunca se deben obstruir con otros objetos.

Batería de litio • Existe riesgo de explosión si esta batería se coloca en la posición incorrecta. Cambiar esta batería únicamente con el mismo tipo (o su equivalente) recomendado por el fabricante. Desachar las baterías usadas siguiendo las instrucciones del fabricante.

FCC Class A Notice

Note: This equipment has been tested and found to comply with the limits for a

Class A digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instruction manual, may cause harmful interference to radio communications. Operation of this equipment in a residential area is likely to cause harmful interference, in which case the user will be required to correct the interference at his own expense.

Note: This unit was tested with shielded cables on the peripheral devices. Shielded cables must be used with the unit to ensure compliance.

Extron’s Warranty

Extron Electronics warrants this product against defects in materials and workmanship for a period of three years from the date of purchase. In the event of malfunction during the warranty period attributable directly to faulty workmanship and/or materials, Extron Electronics will, at its option, repair or replace said products or components, to whatever extent it shall deem necessary to restore said product to proper operating condition, provided that it is returned within the warranty period, with proof of purchase and description of malfunction to:

USA, Canada, South America,

Europe, Africa, and the Middle

and Central America:

East:

 

 

Extron Electronics, Europe

Extron Electronics

Beeldschermweg 6C

1230 South Lewis Street

3821

AH Amersfoort

Anaheim, CA 92805, USA

The

Netherlands

Asia:

 

Japan:

 

 

Extron Electronics, Japan

Extron Electronics,

Asia

Daisan DMJ Bldg. 6F,

135 Joo Seng Road, #04-01

3-9-1 Kudan Minami

PM Industrial Bldg.

 

Chiyoda-ku, Tokyo 102-0074

Singapore 368363

 

Japan

This Limited Warranty does not apply if the fault has been caused by misuse,

improper handling care, electrical

or mechanical abuse, abnormal operating conditions

or non-Extron authorized

modification to the product.

If it has been determined that the product is defective, please call Extron and ask for an Applications Engineer at (714) 491-1500 (USA), 31.33.453.4040 (Europe), 65.6383.4400 (Asia), or 81.3.3511.7655 (Japan) to receive an RA# (Return Authorization number). This will begin the repair process as quickly as possible.

Units must be returned insured, with shipping charges prepaid. If not insured, you assume the risk of loss or damage during shipment. Returned units must include the serial number and a description of the problem, as well as the name of the person to contact in case there are any questions.

Extron Electronics makes no further warranties either expressed or implied with respect to the product and its quality, performance, merchantability, or fitness for any particular use. In no event will Extron Electronics be liable for direct, indirect, or consequential damages resulting from any defect in this product even if Extron Electronics has been advised of such damage.

Please note that laws vary from state to state and country to country, and that some provisions of this warranty may not apply to you.

Table of Contents

Chapter 1 • Introduction ..........................................................

1-1

About this Manual ................................................................

1-2

About the RGB 460xi Series of Interfaces..................

1-2

Features ......................................................................................

1-2

Chapter 2 • Installation and Operation ........................

2-1

Installation Overview ..........................................................

2-2

UL Requirements ....................................................................

2-2

Interface Details .....................................................................

2-3

Front panel features and cabling .........................................

2-3

Euro Channel and floorbox versions ....................................

2-6

Rear panel features and cabling ..........................................

2-6

Pre-installation testing/troubleshooting ..............................

2-9

Mounting the optional AAP or MAAP device ...................

2-11

Application Examples ........................................................

2-12

Appendix A • Specifications, Part Numbers,

 

and Accessories .............................................................................

A-1

Specifications .........................................................................

A-2

Included Parts .........................................................................

A-6

Accessories ...............................................................................

A-7

Cables..........................................................................................

A-7

Optional Adapter Plates....................................................

A-8

All trademarks mentioned in this manual are the properties of their respective owners.

68-542-01 Rev. D

Printed in the USA

06 03

RGB 460xi Series • Table of Contents

i

Table of Contents, cont’d

RGB 460xi Series

Chapter1One

Introduction

About this Manual

About the RGB 460xi Series of Interfaces

Features

ii RGB 460xi Series • Table of Contents

Introduction

About this Manual

This manual contains information about the Extron RGB 460xi series of universal wall, furniture, and floorbox mountable interfaces, and on how to configure and operate them. “RGB 460xi” or “interface” will be used to refer to all models interchangeably unless otherwise noted.

For information on installing the wallbox-mountable versions of these interfaces, refer to one of the available installation guides. For wall or furniture mount installations, with Euro Channel versions, refer to #68-636-03. For Steel City® floorbox installations, refer to #68-636-04. For MK box installations, refer to #68-636-02. For FSR floorbox installations, refer to #68-636-05.

About the RGB 460xi Series of Interfaces

The Extron RGB 460xi (all), RGB 460xi Dual, RGB 464xi,

RGB 468xi, and RGB 468 Mxi are compact, wallbox or floorbox mountable computer video interfaces. Each interface comes in either a two-gang (RGB 460xi), three-gang (RGB 464xi and RGB 468 Mxi), or four-gang (RGB 460xi Dual and RGB 468xi) wall box size, except Steel City, MK, and FSR floorbox models. Optionally, the two-gang and four-gang (except for the

RGB 460xi Dual, MK, and FSR models) interfaces come in an EC version which mounts in a Euro Channel. The interfaces (except for the RGB 460xi Dual, MK, and FSR models) are also wall/ furniture mountable and come with a matching mud ring kit (part #70-086-xx). The interfaces have a 300 MHz (-3dB) video bandwidth.

Each interface accepts one computer video input (15-pin HD) and one stereo audio input, and all models include a 15-pin HD buffered local monitor output.

Features

Horizontal shifting control — The displayed image may be shifted to the left or right by turning a front panel knob.

Advanced Digital Sync Processing™ (ADSP™) — ADSP allows sync processing operations, such as horizontal centering, to occur without affecting the signal’s sync timing. This allows horizontal centering to be applied to signals that are output to digital display devices such as LCD projectors, DLP projectors and plasma displays. An internal DIP switch provides another option, Digital Display Sync Processing™ (DDSP™), to ensure proper displays without altering sync pulse timing or width.

Stereo audio — Unbalanced stereo audio inputs can be output as balanced or unbalanced unamplified stereo audio.

RGB 460xi Series

Chapter2Two

Installation and Operation

Installation Overview

UL Requirements

Interface Details

Application Examples

1-2 RGB 460xi Series • Introduction

Loading...
+ 10 hidden pages