Extron electronic MLM 104 2GWP, MLM 104 LAAP, MLM 104 4GWP, MLM 104 User Manual

0 (0)

MLM 104 Faceplates Installation Guide

MLM 104 Faceplates

This guide provides instructions for installing the following Extron MediaLinkMounting Options faceplates, which are designed for use with MLC 104 IP Plus MediaLink Controllers.

The MLM 104 L, MLM 104 2GWP, or MLM 104 4GWP faceplate is shipped with the MLC 104 IP Plus controller, depending on the controller configuration that is ordered. The rest of the mounting options described below may be ordered separately as replacements, or for use with an MLC 104 IP Plus that is ordered without a faceplate.

MLM 104 L — A low-profile, 3.15" H x 6.50" W (8.0 cm H x 16.5 cm W) lectern/furniture-mounting faceplate. This faceplate is required when you are mounting an MLC 104 IP Plus using an optional UCM RAAP or UCM 10X8P mounting kit.

Part numbers: 70-357-02 (black), 70-357-03 (white), 70-357-05 (RAL9010 white)

MLM 104 LAAP — A low-profile, 3.15" H x 10.00" W (8.0 cm H x 25.40 cm W) lectern/furniture-mounting faceplate with an opening that accommodates four single-space AAPs

Part numbers: 70-358-02 (black), 70-358-03 (white), 70-358-05 (RAL9010 white)

68-878-01, Rev. D

08 07

MLM 104 Faceplates • Installation Guide

1

MLM 104 Faceplates Installation Guide, cont’d

MLM 104 2GWP — A two-gang (4.50" H x 4.60" W [11.43 cm H x 11.68 cm W]) faceplate that can be mounted to a mud ring (mounting bracket), an Extron Surface Mount Box, an Extron External Wall Box, or a standard electrical box Part numbers: 70-378-02 (black), 70-378-03 (white), 70-378-05 (RAL9010 white)

MLM 104 4GWP — A four-gang (4.50" H x 8.23" W [11.43 cm H x 20.9 cm W]) faceplate with an opening that accommodates four single-space AAPs. It can be mounted to a mud ring, an Extron Surface Mount Box, an Extron External Wall Box, or a standard electrical box.

Part numbers: 70-379-02 (black), 70-379-03 (white), 70-379-05 (RAL9010 white)

MLM 104 6GWP— A six-gang (4.50" H x 11.75" W [11.43 cm H x 29.85 cm W]) faceplate with two openings that accommodate four single-space AAPs each (eight AAPs total). It can be mounted to a mud ring, an Extron Surface Mount Box, an Extron External Wall Box, or a standard electrical box.

Part numbers: 70-355-02 (black), 70-355-03 (white), 70-355-05 (RAL9010 white)

2 MLM 104 Faceplates • Installation Guide

Extron electronic MLM 104 2GWP, MLM 104 LAAP, MLM 104 4GWP, MLM 104 User Manual

Replacing the MLC 104 IP Plus Faceplate with an MLM Faceplate

1.If your MLC controller is already installed in a wall or furniture, remove the four screws that attach it to its mounting surface (marked ain the diagram below), and lift it out.

2. After the MLC has been removed from the wall or furniture, use a small Phillips screwdriver to remove the four faceplate attachment screws (marked bin the diagram below), and save them for later use.

CAUTION Do not remove the four faceplate screws while the MLC is installed in a wall or furniture, or the controller may fall into the wall or furniture.

1 1

2

2

DISPLAY

 

2

ON

OFF

VCR

1

VOLUME

 

DVD

2

 

 

 

 

 

PC

3

 

 

CONFIG

 

 

 

 

4

2

MLC 104 IP PLUS

11

3.Lift the faceplate off the MLC 104 IP Plus, as shown below.

O

N

 

 

FF

 

 

O

FF

 

O

 

 

O

N

 

 

 

VCR

DVD

PC

1

DISPLAY

 

 

 

2

 

 

 

 

 

 

 

 

 

 

3

 

VOLUME

 

 

 

4

 

 

 

 

 

 

 

 

O

N

FIG

 

 

C

 

 

 

 

 

 

 

 

 

 

 

 

IP

PLUS

 

 

 

 

 

104 MLC

Extron

MLM 104 Faceplates • Installation Guide

3

Loading...
+ 7 hidden pages