MRS 100/100CC/225/225CC
MRS Reverse Osmosis System
Configurable system that delivers reverse osmosis or blended water for multiple foodservice applications
|
B E N E F I T S |
|
|
|
|
MRS-100 Sys: EV9970-07 |
Improves equipment life and performance by |
|
MRS-100CC Sys: EV9970-10 |
removing at least 90%+ of all dissolved solids |
|
that cause scale build-up |
||
MRS-225 Sys: EV9970-08 |
||
|
||
MRS-225CC Sys: EV9970-09 |
Guards against taste and odor causing |
|
Pre-filter Kit: EV9795-81 |
contaminants while removing dirt, particulates |
|
and dissolved minerals that can adversely affect |
||
6TO-BW Cart: EV9607-41 |
||
taste of water and beverages |
||
MR-100 Cart: EV9627-11 |
Sanitary cartridge replacement is simple, quick |
|
MR-225 Cart: EV9627-03 |
||
and clean. Internal filter parts are never exposed |
||
7CC-BW Cart: EV9627-05 |
||
to handling or contamination |
||
P5 Cart: EV9109-08 |
Wall mount design allows flexible installation |
|
|
||
|
Reduces limescale build-up that can cause |
|
|
excessive machine downtime and increased |
|
|
maintenance costs. Plus, scale reduction reduces |
|
|
energy costs |
|
|
"CC" models introduce a small amount of |
|
|
hardness minerals back into the treated water. |
|
|
This controlled re-mineralization is desirable for |
|
|
coffee and other applications that require some |
|
* System shown with optional Pre-filter kit. |
hardness to achieve optimum results |
|
|
I N S T A L L A T I O N T I P S |
O P E R A T I O N T I P S |
A P P L I C A T I O N / S I Z I N G |
|
|
|
Choose a mounting location suitable to support |
Change filter cartridges on a regular 6-month |
Mineral Reduction System for foodservice |
the full weight of the system when operating |
preventative maintenance program |
applications |
Deliming of equipment prior to application is |
Change RO cartridges on a regular 2-year |
Ideal for: |
recommended |
preventative maintenance program |
Flash steamers, conventional steamers, cheese |
|
|
melters, combi-ovens and coffee/espresso |
Never use saddle valve for connection |
Change cartridges when capacity is reached |
machines |
Use 3/8” (min.) water line |
Always flush the filter cartridge at time of |
Output capacity dependant on membrane |
|
installation and cartridge change |
selected: |
The water inlet must supply a minimum of 0.7 |
|
100 gallons per day (379 lpd) |
gpm |
Proper pre-treatment is required to control RO |
225 gallons per day (852 lpd) |
|
Cartridge (membrane) scale formation and/or |
|
Install vertically with cartridge hanging down and |
fouling |
For use in coffee, steam, reconstitution, ice and |
allow 2 inches above and below unit for cover |
|
multiple applications |
removal and service access |
- Raw water hardness in excess of 7 grains per |
|
|
gallon should be softened |
|
Allow clearance to right of unit for optional pre- |
- The raw water may contain particulates and |
|
filter |
the use of a pre-filter is recommended |
|
Refer to Installation, Operation & Maintenance |
Contact EVERPURE Technical Service for |
|
Manual for cartridge flushing and RO start-up |
pre-treatment recommendations |
|
|
|
|