Euro-Pro CW240 User Manual

Model CW240

ONE (1) YEAR LIMITED WARRANTY

EURO-PRO OPERATING LLC warrants this product to be free from defects in material and

workmanship for a period of one (1) year from the date of the original purchase, when utilized for normal household use, subject to the following conditions, exclusions and exceptions.

If your appliance fails to operate properly while in use under normal household conditions within the warranty period, return the complete appliance and accessories, freight prepaid to EURO-PRO Operating LLC, 21 Lawrence Paquette Industrial Drive, Champlain, NY 12919. If the appliance is found by EURO-PRO Operating LLC to be defective in material or workmanship, EURO-PRO Operating LLC will repair or replace it free of charge. Proof of purchase date and $ 19.95 to cover the cost of return shipping and handling must be included.*

Non-durable parts including, without limitation, filters, brushes and electrical parts which normally require replacement are specifically excluded from warranty.

The liability of EURO-PRO Operating LLC is limited solely to the cost of the repair or replacement of the unit at our option. This warranty does not cover normal wear of parts and does not apply to any unit that has been tampered with or used for commercial purposes. This limited warranty does not cover damage caused by misuse, abuse, negligent handling or damage due to faulty packaging or mishandling in transit. This warranty does not cover damage or defects caused by or resulting from damages from shipping or repairs, service or alterations to the product or any of its parts, which have been performed by a repair person not authorized by EURO-PRO Operating LLC.

This warranty is extended to the original purchaser of the unit and excludes all other legal and/or conventional warranties. The responsibility of EURO-PRO Operating LLC if any, is limited to the specific obligations expressly assumed by it under the terms of the limited warranty. In no event is EURO-PRO Operating LLC liable for incidental or consequential damages of any nature whatsoever. Some states do not permit the exclusion or limitation of incidental or consequential damages, so the above may not apply to you

This warranty gives you specific legal rights, and you may also have other rights which vary from state to state.

*Important: Carefully pack item to avoid damage in shipping. Be sure to include proof of

purchase date and to attach tag to item before packing with your name, complete address and phone number with a note giving purchase information, model number and what you believe is the problem with item. We recommend you insure the package (as damage in shipping is not covered by your warranty). Mark the outside of your package “ATTENTION CUSTOMER SERVICE”. We are constantly striving to improve our products, therefore the specifications contained herein are subject to change without notice.

Bagless Water Filtration Vacuum Cleaner

OWNER’S MANUAL

Model CW240 120V., 60Hz., 9.2 Amps

yyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyy

OWNERSHIP REGISTRATION CARD

Please fill out and mail the product registration card within ten (10) days of purchase in order to validate the foregoing Limited Warranty. The registration will enable us to contact you in the unlikely event of a product safety notification. By returning this card you acknowledge to have read and understood the instructions for use, and warnings set forth in the accompanying instructions.

RETURN TO: EURO-PRO OPERATING LLC, 21 Lawrence Paquette Ind. Dr., Champlain, NY 12919

Model CW240

_______________________________________________________________________

Appliance model

_______________________________________________________________________________ Date purchased Name of store

_______________________________________________________________________________ Owner’s name

_______________________________________________________________________________ Address City State Zip code

Printed in China

For information or assistance:

USA: EURO-PRO Operating LLC

21 Lawrence Paquette Industrial Drive Champlain, NY 12919 Tel.: 1-866-98SHARK

(1-866-987-4275)

www.sharkvac.com

IMPORTANT SAFETY INSTRUCTIONS

When using your Bagless Water Filtration Vacuum, basic safety precautions should always be observed, including the following:

1. Read all instructions before using your vacuum.

2. Use the system only for its intended use.

3. To protect against a risk of electric shock, do not immerse any part of the system in water or other liquids.

4. Never yank cord to disconnect from outlet; instead, grasp plug and pull to disconnect.

5. Do not allow cord to touch hot surfaces.

6. Do not run appliance over cord.

7. Do not operate the system with a damaged cord or plug, or if the appliance or any other part of the system has been dropped or damaged. To avoid the risk of electric shock, do not disassemble or attempt to repair the vacuum. Return the system to EURO-PRO Operating LLC (see warranty)

for examination and repair. Incorrect

re-assembly or repair can cause a risk of electrical shock or injury to persons when the vacuum is used.

8. Close supervision is necessary for any appliance being used by or near children. Do not leave the system unattended while connected.

9. Keep hair, loose clothing, fingers and all parts of body away from opening and moving parts.

10. Do not use to pick up flammable or

combustible liquids such as gasoline or use in areas where they may be present.

11. Do not pick up anything that is burning or smoking such as cigarettes, matches or hot ashes.

12. Use extra care when cleaning on stairs.

13. This appliance is intended only for household use. Follow all user instructions in this manual.

14. This unit should not be used to pick up liquids from containers, sinks, tubs, etc.

15. Do not use on uneven surfaces. Do not tip/tilt unit over when in use.

To reduce the risk of fire, electric shock, or injury:

• Do not leave the vacuum plugged in when unattended. Unplug the electrical cord when not in use and before servicing.

• Do not allow to be used as a toy. Close attention is necessary when used by or near children, pets or plants.

• Use only as described in this manual. Use only manufacturer’s recommended accessories.

• Do not pull cord, use cord as a handle, close a door on cord, or pull cord around sharp edges or corners.

• Do not run unit over power cord. Keep cord away from heated surfaces.

•Use only extension cords UL-rated or cUL at 15 amperes. extension cords rated for less amperage may overheat. Care should be taken to arrange the cord so that the cord cannot be pulled or tripped over.

• Turn off all controls as applicable before unplugging from electrical outlet.

• Do not unplug by pulling on cord. To unplug, grasp the plug, not the cord.

• Do not handle plug or vacuum with wet hands or operate without shoes.

• Do not put any objects into openings. Do not use with any opening blocked. Keep free of dust, lint, hair and anything else that may reduce air flow.

• Store your appliance indoors in a cool, dry area.

• Keep your work area well lit.

• Do not immerse the vacuum into water or other liquids.

• Keep end of hose, wands and other openings away from your face and body.

• Using improper voltage may result in damage to the motor and possible injury to the user. Correct voltage is listed on rating label.

SAVE THESE INSTRUCTIONS

TROUBLE SHOOTING GUIDE

PROBLEM POSSIBLE REASON POSSIBLE SOLUTION

1. Plug unit in firmly.

2. Check fuse or breaker. Replace fuse/reset breaker.

3. Call 1-800-798-7398.

4. Turn the unit off and unplug from outlet. Allow unit to cool down, then Restart.

1. Empty water tank–

(see page 4).

2. Turn unit off and unplug from wall outlet. Check for object(s) in air duct and remove.

3. Turn unit off and unplug from wall outlet. Check for objects in flexible hose / extension tube.

1. Clear obstructions.

2. Clear obstructions.

3. Empty water tank.

VACUUM WILL NOT OPERATE

VACUUM WILL NOT PICK-UP OR SUCTION POWER IS WEAK

TURBO BRUSHES DO NOT ROTATE OR ROTATE SLOWLY

1. Power cord not firmly plugged into outlet.

2. No power in wall outlet.

3. Needs servicing.

4. Thermostat has tripped.

1. Water tank is full.

2. Unit clogged.

3. Flexible Hose / Extension Tube clogged

1. Rotating brush or elbow obstructed.

2. Hose obstructed.

3. Water tank full.

ORDERING REPLACEMENT FILTERS

TO ORDER REPLACEMENT FILTERS

for Model CW240

Call: 1-866-98SHARK (1-866-987-4275) Monday to Friday 8:30 A.M. - 5:00 P.M. Eastern Standard Time

visit our website: www.sharkvac.com

FOR TECHNICAL SUPPORT

for Model CW240

Call: 1-800-798-7398 Monday to Friday 8:30 A.M. - 5:00 P.M. Eastern Standard Time

Please Note: Filter are washable. They should, however, be replaced every

three (3) months to ensure peak performance of your vacuum.

Important: Make sure that filters are completely dry before re-installing back in

the vacuum.

For Household Use Only

WARNING: This appliance is equipped with a grounded-type 3-wire cord (3-prong

plug). This plug will only fit into an electrical outlet made for a 3-prong plug. This is a safety feature. If the plug should fail to fit the outlet, contact an electrician to replace the outlet. Do not attempt to defeat the safety purpose of the grounding pin, part of the 3-prong plug.

Rev. 07/03A

Motor Thermostat

IMPORTANT: This motor is equipped with a motor protective thermostat.

If for some reason the vacuum cleaner should overheat, the thermostat will automatically turn the unit OFF. Should this occur, unplug the vacuum cleaner from wall outlet or turn off switch. Allow the unit to cool. To restart, re-plug into wall outlet or turn switch back on.

OPERATING INSTRUCTIONS cont.

Emptying & Cleaning Water Tank WARNING: To reduce risk of electric

shock - unplug before cleaning or emptying water tank.

WARNING: Water level MUST NEVER

exceed the "Max" level indicated on the water tank. Empty tank when water level reaches "MAX" indicator. If water is seen to be coming from the exhaust immediately turn the unit off and unplug from electrical outlet. Empty water tank and clean. Refill water tank with clean water to the "MIN back in and continue working.

1. Unplug unit from electrical wall outlet.

2. Remove the water tank and empty into a toilet or an outside drain.

3. The foam inlet filter should be cleaned regularly depending on amount of usage. A severely soiled or clogged filter should be thoroughly washed with fresh tepid water. A mild detergent may be used if required.

4. Let the filter air dry completely before replacing in vacuum. Do not use a washing machine to rinse the filter. Do not use a hair dryer to dry

it. Air dry only. Never operate the vacuum without the filter in place.

5. Exhaust filter should be inspected each time the water tank is emptied. To clean the exhaust filter follow the same procedure as for the foam inlet filter.

6. The water tank should also be thoroughly washed. A mild detergent may be used if required.

DO NOT IMMERSE THE ELECTRICAL PART OF THE VACUUM INTO WATER OR ANY OTHER LIQUID.

7. Store your vacuum in a cool, dry place.

" level, then plug unit

Please Note: The foam inlet filter and the exhaust filter are washable. It is recommended however, that they should be replaced every three (3) months or sooner depending on the amount of usage.

Using the Floor to Carpet Attachment

The brushes under the floor to Carpet Nozzle (A) can be left in “Out” position for use on carpets or can be lifted to “Up” position for vacuuming floors. (Fig. 3)

Fig. 3

Motor Thermostat Important: This vacuum cleaner is

equipped with a motor protective thermostat. If for some reason your vacuum overheats, the thermostat will automatically turn the unit off. Should this occur, unplug the vacuum from the wall outlet and turn off the switch. Allow the unit to cool for a minimum of 45 minimum prior to restarting the unit. To restart, replug the vacuum into the wall socket and turn the switch back on.

Cord Storage

A convenient cord storage area is provided on the top cover. Simply spool the cord in either direction under the top cover and tuck the plug under the lip.

GETTING TO KNOW YOUR BAGLESS WATER

FILTRATION VACUUM

1. Handle

2. On/Off Power Switch

3. Speed Control

4. Flexible Hose

5. Water Tank

6. Base

7. Triangular Brush

Technical Specifications

Voltage: 120V., 60Hz. Power: 9.2 Amps, 1100 Watts

8. Upholstery Brush

9. Crevice Tool

10. Small Round Brush

11. Floor to Carpet Brush

12. Wet Use Brush

13. Extension Tube (3pcs) 14 Deluxe Air Driven Turbo Brush

15. Compact Air Driven Turbo Brush

OPERATING INSTRUCTIONS OPERATING INSTRUCTIONS cont.

NOTE: Always remove the power plug

from the wall outlet before assembling or removing accessories.

1. Add 6 to 8 cups of water to the tank.

2. Attach the flexible hose to the suction hole.

3. Attach one of the extension tubes to the hand grip of the flexible hose. Insert the hand grip into the wider end of the extension tube and turn to tighten the connection.

4. Attach the other extension tubes to the first one and turn to tighten the connection.

5. Attach the desired accessory (brush with squeegee, air driven turbo brush or floor to carpet brush) to the narrow end of the extension tube.

Assembling the Base Casters

The casters for the base on your new Bagless Water Filtration Vacuum are packed and shipped unassembled. To assemble the caster to the base, simply insert the caster stem into one of the four (4) holes in the base and push downward with the palm of your hand. (See illustration below.) Repeat for the next three (3) casters.

Your CW240 Water Filtration Vacuum may also be used as a wet pick-up vacuum. To use as a wet pick-up vacuum, operate the unit on the wet surface as you would for a dry surface.

NOTE

: The air driven turbo brush may

not be used for wet pick-up. It is important to monitor the water level in the tank when using the unit for wet pick-up to avoid filling water tank over the "Max" level. "MAX" pick-up capacity is 8 cups

or 64 fl. oz.

WARNING: Water level MUST NEVER

" level, then plug unit

Using Your Bagless Water Filtration Vacuum

IMPORTANT: DO NOT operate this

vacuum when water level is below the "Min" line on the water tank.

1. Unwrap the power cord to the desired length.

2. Insert plug into electrical outlet.

3. Turn the "On/Off" Switch to the "On" position.

4. The speed control knob can be used to adjust the suction. The manual variable suction control on the hand grip can be used to further reduce the suction.

5. Keep the flat space between the floor brush and floor surface, hand grip and extension tube and move the vacuum cleaner up and down.

6. When finished using the unit, unplug from electrical outlet and wrap the power cord around the top of the unit.

Using the Deluxe and Compact Air Driven Turbo Brushes

1. Turn off the vacuum and unplug from wall outlet.

2. Attach the Air Driven Turbo Brush to the extension tube.

3. Re-plug the vacuum into the wall outlet and start the vacuum. Beater bar on the Air Driven Turbo Brush will begin to rotate and will continue to operate as long as the vacuum is “ON”.

4. The Deluxe Air Driven Turbo Brush is adjustable for carpet nap. The Compact Turbo Brush is not. To adjust for high pile carpet, move the slide control on top of the brush housing as shown in Fig. 1.

5. For low nap adjust the slide control as shown in fig. 2.

IMPORTANT: Do not use the Air

Driven Turbo Brush for wet pick-up. Use ONLY

Fig. 1

For high pile carpet

WARNING: The beater brush of this floor attachment rotates very fast. To avoid injury, DO NOT TOUCH the beater brush with fingers while the brush is rotating.

for dry floors or carpets.

Fig. 2

Slide

Compact Air Driven Turbo Brush

Slide

For low nap carpet

Cleaning the Compact Air Driven Turbo Brush

Locking Latch

Tilt Upwards

Turbine

1. Slide locking latch forward then tilt the top housing of the brush upwards. The top housing is hinged and will tilt up approximately 45°only.

2. Inspect turbine wheel and air passage for debris and/or blockage. Remove debris if present.

3. Inspect the rotating brush for built-up hair or string. If present, remove by carefully cutting with scissors. Avoid damaging or cutting bristles.

4. Once clean, close the top cover of the turbo brush and slide the locking latch toward the rear of the brush to lock.

WARNING: These air driven turbo

brushes rotate with the force of the suction power. As the water tank fills with dirt, the suction power will reduce and the air driven turbo brushes will slow down. If this happens, empty the water tank and verify that no threads or hairs have accumulated on the beater brushes which can also reduce beater brush rotation speed.

Euro-Pro CW240 User Manual

Specifications and Main Features

Frequently Asked Questions

User Manual