Ergotron Mouse Shelf User Manual
Mouse Shelf (Swing Out)
User's Guide
Before beginning installation of your Mouse Shelf (Swing
Out), please take a moment to review the parts listed to
verify that your shipment is complete.
This product is designed to be installed on just about any
Anthro cart or table. It may be helpful to review the assembly
instructions of all Anthro products you purchased and are
planning to include in this installation.
SAVE THESE INSTRUCTIONS!
Component list for part # 687xx.
01– Mouse Shelf (Swing Out) ..... Qty. 1 .................575-5002-00
02– 1/2” Wood Screws ................... Qty. 4 .................325-5008-00
03– Mouse Pad ............................ Qty. 1.................. 575-5001-03
04– Mouse Rail ..................................Qty. 1.................. 575-5001-02
04
03
01
02
A 5/32” Hex Driver, electric drill and 1/8” drill bit (not included) will
be needed for this assembly procedure.
www.ergotron.com |
300-5235-00 rev. D
• /
USA: 1-800-888-8458
|
Europe: +31 (0)33-45 45 600
|
China: 400-120-3051
|
Japan: japansupport@ergotron.com
Step 1
Your Mouse Shelf (Swing Out) may be mounted to just
about any AnthroCart Shelf or Worksurface.
Hold the Shelf in your desired mounting location or use
the supplied drill template (see below).
1
/2” Wood Screw
325-5008-00
Mark the four hole positions. Carefully drill all holes
using a
small amount of masking tape at
1
/8” drill bit (approximately 1/2” deep). TIP: Place a
1
/2” on your drill bit.
Secure the Mouse Shelf to your Worksurface using the
1
/2” Wood Screws.
four
Finally, place the Mouse Rail and Mouse Pad onto the
Mouse Shelf as best suits your personal preference.
Congratulations! Your assembly is complete.
1:1 Scale Drill Template
Assembled Cart
1
/2” Wood
Screw
Mouse Rail
Mouse Pad
Mouse Swing
Out Shelf
For the latest User Installation Guide please visit: www.ergotron.com
For Warranty visit: www.ergotron.com/warranty
For Service visit: www.ergotron.com
For local customer care phone numbers visit: http://contact.ergotron.com
www.ergotron.com |
© 2018 Ergotron, Inc. All rights reserved.
USA: 1-800-888-8458
|
Europe: +31 (0)33-45 45 600
|
China: 400-120-3051
|
Japan: japansupport@ergotron.com
300-5235-00 rev. D
• /
Loading...