EPSON
Product Information Sheet
1.Article and Corporate Identification
Product: |
Epson Ink Cartridge T028201 |
|
for use with Epson Stylus Color C60 Printer |
Distributor: |
Epson America, Inc. |
|
3840 Kilroy Airport Way |
|
Long Beach, CA 90806 |
|
United States |
|
TEL: 562-276-1369 |
|
FAX: 562-997-5799 |
|
|
|
The EPSON T028201 Ink Cartridge |
||
2. Composition Information |
|
|
|
|
|
This is an aqueous ink formulation |
|
|
|
|
|
|
|
|
|
|
|
|
Ink Composition |
CAS No. |
|
% By Weight |
|
|
|
|
|
|
|
|
Proprietary dyes and pigments |
- |
|
5 - 10 % |
|
|
|
|
|
|
|
|
Proprietary organic materials |
- |
|
15 – 20 % |
|
|
|
|
|
|
|
|
Glycerols |
- |
|
5 - 10 % |
|
|
|
|
|
|
|
|
Water |
7732-18-5 |
|
balance |
|
|
|
|
|
|
|
3.Hazard Identification
3.1Emergency Overview: Ink component is a light black liquid that may cause irritation. Avoid contact with eyes or
clothing. In the case of skin contact, wash with soap and water. Keep out of reach of children.
3.2Potential Health Effects:
Eyes: Ink contact with eye may be mildly irritating. See Section 11 for Toxicology.
Skin: Ink contact with skin may cause irritation, swelling, or redness. It is not expected to cause an allergic skin reaction. See Section 11 for Toxicology.
Inhalation: Intentional exposure to ink vapors may cause respiratory irritation. See Section 11 for Toxicology. Ingestion: May cause upset stomach. See Section 11 for Toxicology.
PIS # T028201 |
Version 3.52 (USA) |
Page 1 of 4 |
Release Date 07/07 |
EPSON
4.First Aid Measures
4.1Eyes: Immediately flush with room temperature, low pressure, clean water for at least 15 minutes. Seek
medical attention if eye irritation continues.
4.2Skin: Wash surface areas with soap and water. Wash soiled clothing before rewearing. Seek medical
attention if irritation continues.
4.3Inhalation: Remove subject to ventilated fresh air. Consult physician if necessary.
4.4Ingestion: Seek medical attention if stomach continues to be upset.
5.Fire Fighting Measures
5.1Flammability: Flash point is greater than 230 deg. F / 110 deg. C (closed cup in accordance with
ASTM D3278)
5.2Extinguishing Media: Dry chemical or carbon dioxide
5.3Fire Fighting Instructions: No special fire fighting procedures are required other than breathing apparatus. No
special explosion hazards are known.
6.Accidental Release Measures
If a spill occurs, use sponges to wipe-up ink, then rinse area with damp cloth. Place waste in closed container for disposal. Use proper ventilation. Do not dispose of waste to the sewer. No eye or skin protection required during clean-up. Wash hands with soap and water.
7.Precautions for Safe Handling and Use
Keep out of reach of children and do not drink ink. Do not store the cartridge in high or freezing temperatures. Keep cartridge out of direct sunlight. Do not dismantle cartridge. Do not store cartridges with oxidizing agents or explosives. Make sure cartridge is dry before insertion into printer housing.
8.Exposure Controls and Personal Protection
8.1 |
Engineering Controls: |
None required |
8.2 |
Exposure Controls: |
None required |
8.3 |
Personal Protection: |
None required when cartridges are used as intended |
9.Physical and Chemical Properties of Ink Formulation
Appearance: |
Black Liquid |
Odor: |
None |
pH: |
about 9 |
Boiling point: |
Approximately 212 deg. F / 100 deg. C |
Freezing point: |
Less than 32 deg. F / 0 deg. C |
Melting point: |
Less than 32 deg. F / 0 deg. C |
Flash point: |
Greater than 230 deg. F / 110 deg. C (closed cup, ASTM D3278) |
Autoflammability: |
None |
Explosive properties: |
None |
PIS # T028201 |
Version 3.52 (USA) |
Page 2 of 4 |
Release Date 07/07 |
Loading...