PowerLite® Pro G6050W/G6150/G6250W/
G6450WU/G6550WU
This Quick Reference card gives brief instructions on connecting your PowerLite projector and using common features. For details, see the online User’s Guide.
5BNC-to-VGA cable |
BNC-to-component cable |
VGA-to-component cable |
VGA cable |
Ethernet cable |
Stereo mini jack cable |
HDMI cable |
DisplayPort cable |
Video cable |
S-Video cable |
RCA audio cable |
1.Turn on your computer or image source.
2.Remove the lens cover.
3.Press the power button (projector) or On button (remote control). After the power light stays green, the projector is ready.
Note: If the Direct Power On function is enabled, you can turn the projector on without pressing the power button; just plug it in or flip the switch controlling the outlet to which the projector is connected. To turn on this feature, see the online User’s Guide.
4.If your image does not appear, see “Switching Between Image Sources” or “Troubleshooting.”
Changing the Language of the Projector Menus
The default language of the projector’s menu system is English, but you can change it as necessary.
1.Press the Menu button to acess the projector’s menu system.
2.Select Extended and press .
3.Select Language and press .
4.Select your language and press .
5.When you’re done, press Menu to exit.
Switching Between Image Sources
Press the Search button (remote control), one of the source buttons (remote control), or the Source Search button (projector).
Set the Screen Type setting to the screen’s aspect ratio.
1.Press the Menu button.
2.Select Extended > Display > Screen > Screen Type.
3.Select the screen’s aspect ratio.
Note: The displayed image should match the screen’s size and shape.
4.When you’re done, press Menu to exit.
Note: After changing the screen type, you may need to change the aspect ratio of the projected image depending on the input signal. Press the Aspect button on the remote control to change the aspect ratio, if necessary.
1. Release the lens shift dial lock.