Epson EB-1420Wi, EB-1430Wi User Manual

Installation Guide

Guide d’installation

Guía de instalación

Español Français English

Using the Product Safely

Safety Instructions

For your safety, read all the instructions in this guide before using this product. Incorrect handling that ignores instructions in this guide could damage this product or could result in personal injury or property damage. Keep this installation guide at hand for future reference.

Read the User'sGuide and SafetyInstructions for your projector and follow the instructions in these documents.

Safety indications

The documentation and this product use graphical symbols to show how to use this product safely.

The indications and their meaning are as follows. Make sure you understand them properly before reading the guide.

Symbol	Explanation
Warning	This symbol indicates information that, if ignored, could possibly result in personal injury or
	even death due to incorrect handling.
Caution	This symbol indicates information that, if ignored, could possibly result in personal injury or
	physical damage due to incorrect handling.

Explanation of Symbols

Symbols	Explanation

Symbol indicating an action that must not be done

Symbol indicating an action that should be done

c Symbol indicating related or useful information

Safety Precautions for Installation

Warning

The setting plate is exclusively for mounting the projector on a wall. If anything other than a projector is mounted, the weight may result in damage.

If this product falls, it could cause death or personal injury.

The installation work (wall mounting) should be performed by specialists who have tech nical knowledge and ability. Incomplete or incorrect installation could cause the product to fall and cause personal injury or property damage.

Follow the instructions in this guide when installing this product.

If the instructions are not followed, this product may fall, resulting in personal injury or an accident.

1

Using the Product Safely

Warning

Handle the power cord carefully.

Incorrect handling may cause fire or electric shock. Observe the following precautions when han dling:

•Do not handle the power plug with wet hands.

•Do not use a power cord that is damaged or modified.

•Do not pull the power cord with too much force when routing the cable through the setting plate.

Do not install the setting plate in a place where it might be subjected to vibration or shock.

This could cause damage to the product or mounting surface. If this product falls, it could cause death or personal injury.

Install the setting plate so that it can sufficiently support the mass of the projector and setting plate, and resist any horizontal vibration. Use M10 nuts and bolts.

Nuts and bolts smaller than M10 could cause the setting plate to fall. Epson accepts no responsibility for any damage or injury caused by lack of wall strength or inadequate installation.

The installation work should be performed by at least two qualified service personnel. If you need to loosen any screws during installation, be careful not to drop this product.

If this product falls, it could cause death or personal injury.

When mounting this product on a wall, the wall requires enough strength to hold the projector, the setting plate, the Control Pad, and the Touch Unit (EB-1430Wi only).

This product should be installed on a concrete wall. The maximum combined weight of the pro jector, the setting plate, and the Control Pad is approximately 14 kg (not including cables). When the Touch Unit (EB-1430Wi only) is installed, the maximum weight is approximately 14.5 kg (not including cables). Ensure the strength of the wall before mounting this product on the wall. If the wall is not strong enough, reinforce the wall before installation.

Inspect the setting plate on a regular basis to ensure there are no broken parts or loose screws.

If any parts are damaged, stop using the setting plate immediately. If this product falls, it could cause death or personal injury.

Do not disassemble or remodel this product.

There are numerous high-voltage sections inside the product that could cause a fire, electric shock, or an accident.

Do not hang on this product or hang a heavy object on this product.

If this product falls, it could cause death or personal injury.

Do not use adhesives, lubricants, or oils to install or adjust the setting plate.

If you use adhesives to prevent the screws from loosening or things such as lubricants or oils on the slide plate fixing part of the projector, the case may crack and cause the projector to fall, resulting in personal injury or property damage.

Tighten all screws firmly after adjustment.

Otherwise, the product may fall and cause personal injury or property damage.

Never loosen the bolts and nuts after installation.

Confirm that the screws have not become loose on a regular basis. If you find any loose screws, tighten them firmly. Otherwise, the product may fall and cause personal injury or property damage.

Route the cables so that they do not interfere with the nuts and bolts.

Incorrect handling of the cables may cause fire or electric shock.

2

Using the Product Safely

Warning

When turning on the projector, do not look into the projection window.

This could cause damage to eyesight due to the powerful light emitted. Take particular care when there are children present. When turning on the projector at a distance using the remote control, make sure there is no one looking into the projection window.

When using the projector, do not place any objects or put your hand near the projection window.

This area is dangerous as it reaches a high temperature due to the concentrated projection light.

Do not cover the projector's air intake vent or air exhaust vent. If either of the vents are covered, the internal temperature could rise and cause a fire.

Avoid locations subject to high temperatures, such as close to heaters, and leave a gap of at least 20 cm between the wall and the air exhaust vent.

Do not use the projector in a location subject to combustible or explosive gas.

The projector may catch fire because of the high temperature of the lamp inside the projector.

If any abnormalities occur with this product, immediately disconnect the cables from the product, and then contact your local dealer or the nearest Epson service call center.

Continuing to use the product in an abnormal condition could cause a fire, electric shock, or visual impairment.

Caution

Do not install this product in a location where the operating temperature for your projector model may be exceeded.

Such an environment may damage the projector.

Install this product in a place free from excessive dust and humidity to prevent the lens or optical components from becoming dirty.

Do not use excessive force when adjusting this product.

This product may break, resulting in personal injury.

Notes on handling the Touch Unit (EB-1430Wi only)

Warning

Do not disassemble or remodel the Touch Unit.

The Touch Unit contains a high power laser product that could cause a fire, electric shock, or an accident.

Follow the instructions in this guide to setup and operate the Touch Unit.

If the Touch Unit is not setup and operated correctly, it could cause damage to eyesight due to light from the laser.

Do not apply optical devices such as a magnifying glass or telescope to the laser light diffused from the Touch Unit.

Using it in this condition could have a negative influence on the human body. It could also cause a fire or accident.

3

Using the Product Safely

Warning

Do not look into the Touch Unit's laser diffusion ports.

This could cause damage to eyesight due to the powerful laser light emitted. Take particular care when there are children present.

Do not view the laser light using optical devices such as a magnifying glass within a range of 70 mm from the Touch Unit's laser diffusion ports.

This could cause visual impairment.

Only connect the Touch Unit to the EB-1430Wi. Do not connect it to any other projectors or devices.

The device could malfunction, or laser light could leak beyond its restricted area.

Do not go near the Touch Unit if you are using medical equipment such as a pace maker. Furthermore, when using the Touch Unit, make sure there is no one using medical equip ment such as a pace maker, in the surrounding area.

A powerful magnet within the unit generates electromagnetic interference which may cause med ical equipment to malfunction.

Caution

Do not go near the Touch Unit with magnetic storage media such as magnetic cards, or precision electronic devices such as computers, digital watches, or mobile phones.

A powerful magnet within the unit could corrupt data or cause a malfunction.

About This Installation Guide

This guide describes how to mount the short-throw projector EB-1430Wi/EB-1420Wi on a wall. It also explains how to install the Control Pad and the Touch Unit (EB-1430Wi only) after mounting on a wall.

4

Using the Product Safely

Choosing an Installation Location

Projector installation location

•Carry out power supply wiring work for the installation location of the setting plate in advance.

•Install the projector away from other electric devices such as fluorescent lights or air conditioners. Some kinds of fluorescent lights could interfere with the remote control of the projector.

•It is recommended to keep connection cable length less than 20 meters to reduce external noise.

•We recommend using stick-on screens or board screens.

•Make sure the projector is installed under the following conditions.

•The projected image is a rectangular shape without any distortion.

•The projector is tilted at an angle of no more than ±3° vertically and horizontally in relation to the screen.

•When using the interactive function (Easy Interactive Function), install so that the projected image is within reach.

•Do not install the projector or the screen in a location subject to direct sunlight. If the projector or the screen are subject to direct sunlight, the interactive function may not operate correctly.

Control Pad installation location

When powering the Control Pad using batteries, make sure the installation location meets the following requirements.

•Install the Control Pad on the same surface as the projection screen.

If the projection screen and the Control Pad installation point are uneven, install the Control Pad approximately 20 cm from the edge of the screen.

•Make sure there are no obstacles between the Control Pad and the projector (not including the Touch Unit).

In the following situations, use the optional Remote control cable set (ELPKC28) to supply power to the Control Pad from the projector.

•When the requirements mentioned above are not met.

•When the projection screen and the Control Pad installation point are uneven and the difference in height is more than 5 cm

•When the projector is placed on a table and projecting to the screen.

•When multiple projectors are being used.

Touch Unit installation location (EB-1430Wi only)

•When using the Touch Unit, install the projector using one of the following methods. The Touch Unit cannot be used if another installation method is used.

•Mount the projector on a wall or suspend it from a ceiling and project images from in front of the screen.

•Install vertically on a table and project from the front of the table. (When installing vertically on a table, you need the optional Interactive Table Mount (ELPMB29).)

•Before installing the Touch Unit, make sure that the installation location meets the following conditions.

•The Touch Unit can be secured with magnets or with screws.

•A flat, smooth, unwarped surface with no unevenness on the screen surface of more than 5 mm.

5

Using the Product Safely

• When installing on a whiteboard, install the Touch Unit within the frame of the whiteboard.

Correct installation position					Incorrect installation position

•When installing the Touch Unit, make sure there are no obstacles, such as cables, or protruding items such as whiteboard trays, holders, or thick frames in the shaded areas in the following figure. The Touch Unit will not operate correctly.

[Unit: mm]

6

Contents

Using the Product Safely

Safety Instructions . . . . . . . . . . . . . . . . . . . . 1

Safety indications . . . . . . . . . . . . . . . . . . . . . . . 1 Explanation of Symbols . . . . . . . . . . . . . . . . . . . 1 Safety Precautions for Installation . . . . . . . . . . . . 1

Notes on handling the Touch Unit (EB-1430Wi

only) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 About This Installation Guide . . . . . . . . . . . . . . . 4

Choosing an Installation Location . . . . . . 5

Projector installation location . . . . . . . . . . . . . . . 5 Control Pad installation location . . . . . . . . . . . . . 5

TouchUnitinstallation location (EB-1430Wionly)

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5

Installation Guide

Installation Work Flow . . . . . . . . . . . . . . . . 9

Package Contents . . . . . . . . . . . . . . . . . . . . 10

Setting plate . . . . . . . . . . . . . . . . . . . . . . . . . . 10 Control Pad . . . . . . . . . . . . . . . . . . . . . . . . . . . 11 Touch Unit (EB-1430Wi only) . . . . . . . . . . . . . . . 11

Specifications . . . . . . . . . . . . . . . . . . . . . . . 12

Setting plate . . . . . . . . . . . . . . . . . . . . . . . . . . 12 Wall plate . . . . . . . . . . . . . . . . . . . . . . . . . . 12 Vertical slide adjustment range . . . . . . . . . . . 13 Horizontal slide adjustment range . . . . . . . . . 13

Forward/backward slide adjustment range

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13 Control Pad . . . . . . . . . . . . . . . . . . . . . . . . . . . 14

Control Pad (external dimensions/weight)

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14 Cable routing holes . . . . . . . . . . . . . . . . . . . 14 Touch Unit (EB-1430Wi only) . . . . . . . . . . . . . . . 15

Touch Unit (external dimensions/weight)

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15 Attached labels . . . . . . . . . . . . . . . . . . . . . . 15 Laser diffusion port . . . . . . . . . . . . . . . . . . . 16

Projection Distance Table . . . . . . . . . . . . 17

Figures of Installation Dimensions . . . . . . . . . . .	17
When installing the Touch Unit (EB-1430Wi
only) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .	17
When installing the Control Pad . . . . . . . . . .	19

When Projected Image is Smaller than 75 Inches

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20 16:10 projected image . . . . . . . . . . . . . . . . . 21 16:9 projected image . . . . . . . . . . . . . . . . . . 21 4:3 projected image . . . . . . . . . . . . . . . . . . . 22

When Projected Image is Larger than 75 Inches

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23 16:10 projected image . . . . . . . . . . . . . . . . . 24 16:9 projected image . . . . . . . . . . . . . . . . . . 25 4:3 projected image . . . . . . . . . . . . . . . . . . . 25

Installing the Setting Plate . . . . . . . . . . . 27

Connecting Devices . . . . . . . . . . . . . . . . . . . . . 27 Necessary cables . . . . . . . . . . . . . . . . . . . . . 27 Installation Procedure . . . . . . . . . . . . . . . . . . . 30 Disassemble the parts . . . . . . . . . . . . . . . . . 30 Assemble the parts . . . . . . . . . . . . . . . . . . . 30 Install the wall plate on the wall . . . . . . . . . . 32

Determine the projection distance, and then

pass the cables through the setting plate . . . . 34

Attaching the setting plate to the wall plate

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 36

Securing the projector to the setting plate

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 38 Adjusting the Projected Image . . . . . . . . . . . . . 40 Adjusting the Projection Position . . . . . . . . . 40 Fine-tuning the Focus . . . . . . . . . . . . . . . . . 46 Calibrating the pen . . . . . . . . . . . . . . . . . . . 47 Attaching the Covers . . . . . . . . . . . . . . . . . . . . 51

Installing the Control Pad . . . . . . . . . . . . 53

Installation Procedure . . . . . . . . . . . . . . . . . . .

53

Installing the Touch Unit (EB-1430Wi

only) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 56

Installation Procedure . . . . . . . . . . . . . . . . . . . 56

Angle Adjustment . . . . . . . . . . . . . . . . . . . . . . 60

Touch Calibration . . . . . . . . . . . . . . . . . . . . . . 71

Appendix

Batch Setup Function . . . . . . . . . . . . . . . . 75

Saving settings to the USB flash drive . . . . . . . . 75

Reflecting saved settings to other projectors

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 76 When Setup Fails . . . . . . . . . . . . . . . . . . . . . . . 77

7

Contents

Using the Interactive Function when Multiple Projectors are Installed . . . . . . 79

Attaching a Security Cable . . . . . . . . . . . . 80

General Notice . . . . . . . . . . . . . . . . . . . . . . 81

8

Installation Guide

Installation Work Flow

Follow the procedures below to mount the projector on a wall.

aInstalling the Setting Plate and the Projector (s p.27)

bAdjusting the Projected Image (s p.40)

cCalibrating the Interactive Pen (s p.47)

dInstalling the Control Pad (s p.53)

When installing the Touch Unit, finish installing the projector first, and then follow the procedures below (EB-1430Wi only).

aInstalling the Touch Unit (s p.56)

bAdjusting the Angle of Laser Diffusion (s p.60)

cPerforming Touch Calibration (s p.71)

9

Installation Guide

Package Contents

Setting plate

The following supplied items are necessary to mount the projector on a wall. Confirm that you have all items before beginning.

Setting plate

Hexagonal axis

Wall plate

Wall plate cover	3-axis adjustment unit
	*The slide plate (	) is secured dur
	ing shipping.

End cap

Hexagon wrench (for M4)

Template sheet

(for installing the wall plate)

Open-ended spanner 13 mm (for M8 and M6), 6 mm (for hexagonal axis)

Shape	Name	Quan	Application
		tity
	M4 x 12 mm hexagon socket head cap bolt	6	For wall plate assembly
	with washer/spring washer	4	For 3-axis adjustment unit/arm installation
		4	For slide plate/projector installation
		2	For slide plate/3-axis adjustment unit installa
			tion (attached during shipping)
	M6 x 20 mm hexagon shoulder head bolt	1	For setting plate/wall plate installation
	with washer/spring washer
	M6 x 20 mm cross recessed head shoulder	3
	screws with plastic washers

•Use the bolts or screws supplied with this product to install it as directed in this guide. Do not substitute these bolts with any other types.

•You need to use commercially available M10 x 60 mm anchors (at least 3) to attach the wall plate to the wall.

•Gather the tools and parts you need before you begin installation.

10

Installation Guide

Control Pad

The following supplied products are necessary when attaching the Control Pad. Confirm that you have all items before beginning.

	AA size batteries	Rubber feet	Port protection
	(x2)		stickers

Control Pad main unit

When installing the Control Pad on a wall and so on, prepare commercially available M4 screws (20 mm x4).

Touch Unit (EB-1430Wi only)

The following supplied products are necessary when attaching the Touch Unit. Confirm that you have all items before beginning.

Touch Unit/Markers x2 (attached to Touch Unit)			Touch Unit connection cable

Spacer for screw hole x3	Label x4	Tape (approx. 6 cm) for secur	Infrared deflector
		ing the marker x12	(approx. 28.5 cm) x8

When installing the Touch Unit on a non-magnetic surface, prepare three M4 screws.

11

Installation Guide

Specifications

Setting plate

Item	Specification	Remark	Reference
			Page
Setting plate weight	Approx. 8.1 kg	Setting plate (3.0 kg), 3-axis adjustment unit
		(1.2 kg), slide plate (0.8 kg), wall plate (2.7 kg),
		wall plate cover and end cap (0.4 kg)
Maximum load capacity	7 kg
Forward/backward slide ad	0 to 360 mm	Arm slide adjustment range: 0 to 273 mm	See the fig
justment range		Adjustment for 3-axis adjustment unit instal	ure below
		lation position: 87 mm
Vertical slide adjustment range	±38 mm		See the fig
			ure below
Horizontal roll adjustment	±3°	Fine adjustments possible with adjustment	s p.40
range		dial
Horizontal rotation adjustment	±8°	Fine adjustments possible with adjustment	s p.40
range		dial
Vertical tilt adjustment range	±3°	Fine adjustments possible with adjustment	s p.40
		dial
Horizontal slide adjustment	±45 mm		See the fig
range			ure below

Wall plate

The following figure shows three wall plates connected to form one plate (separate when shipped).

[Unit: mm]

* Offset value for the position of the center of the projected image and the center of the wall plate

12

Installation Guide

Cable routing holes

When routing cables to connect to the projector through a wall, use positions ( ) and ( ) in the following figure as the cable routing holes.

Vertical slide adjustment range

[Unit: mm]

Horizontal slide adjustment range

[Unit: mm]

Forward/backward slide adjustment range

Arm slide adjustment range

[Unit: mm]

13

Installation Guide

Adjustment range for 3-axis adjustment unit installation position

[Unit: mm]

Control Pad

Control Pad (external dimensions/weight)

[Unit: mm]

•Weight: approx. 240 g (not including batteries and rubber feet)

•Operating temperature: 0 to +50°C (no condensation)

•Operating temperature: -20 to +60°C (no condensation)

Cable routing holes

When routing cables through a wall, use the position ( ) in the following figure as the cable routing hole. Otherwise, remove the cable cover ( ) and route the cables from there. Route the printer cable along the groove at the back of the Control Pad.

14

Installation Guide

Touch Unit (EB-1430Wi only)

Touch Unit (external dimensions/weight)

[Unit: mm]

The Touch Unit weighs 450 g.

Attached labels

The Touch Unit is a Class 1 laser product that conforms to the JIS C 6802:2011 standard. There are warning labels affixed to the Touch Unit to indicate that it is a Class 1 laser product.

15

Installation Guide

The labels contain the following information.

•CLASS 1 LASER PRODUCT

•WARNING: Never open any covers on this unit. Laser product inside.

•Warning:

•CAUTION: CLASS 3B INVISIBLE LASER RADIATION WHEN OPEN.

•AVOID EXPOSURE TO THE BEAM

Laser diffusion port

The laser beam is diffused from the laser diffusion ports at the back of the Touch Unit.

16

Installation Guide

Projection Distance Table

Figures of Installation Dimensions

To find the appropriate screen size, see the following figures when installing. The values are only rough estimates.

The recommended range for the projection distance (a) is 62 to 311 mm.

The offset value for the position of the center of the projected image and the center of the wall plate is 70.5 mm.

When the projected image size (S) is 75 inches or more, the scale on the arm slide (b) is equal to the projection distance (a).

The numbers for (a) and (b) differ if the projected image size (S) is less than 75 inches.

[Unit: mm]

:

Projected image size

:

Wall plate

: Minimum projection distance (Wide: maxi	: Screen
mum zoom)
to maximum (Tele: minimum zoom)
: Numbers on the arm slide scale

: Distance from projected image to wall plate

: Height of projected image

: Distance from surface of screen to wall (100 mm or less)

When installing the Touch Unit (EB-1430Wi only)

When installing the Touch Unit, install it on the screen that is being used for projection.

17

Installation Guide

You need at least 120 mm distance between the top edge of the projected image and the top edge of the actual screen to install the Touch Unit.

Caution

Leave the following gaps around the edge of the screen.

•From the top of the projected image to the bottom of the Touch Unit: 25 mm

•From the edges of the projected image to the edges of the screen: At least 100 mm left and right

•From the bottom of the projected image to the bottom of the screen: At least 20 mm

If there are obstacles such as cables, whiteboard trays, holders, or frames within the areas noted above, the Touch Unit will not operate correctly.

[Unit: mm]

: Projected image size

: Minimum projection distance (Wide: maxi mum zoom)

to maximum (Tele: minimum zoom)

: Numbers on the arm slide scale

: Distance from projected image to wall plate

: Height of projected image

: Distance from surface of screen to wall (100 mm or less)

: Wall plate : Screen

18

Installation Guide

Aspect ratio for standard projected image

When installing the Control Pad

When installing the Control Pad, make sure there is enough space in the surrounding area as shown in the following figure. Because the top cover opens from the left-hand side, you need space on the left-hand side of the Control Pad.

[Unit: mm]

When supplying power using batteries, install the Control Pad within the shaded range shown in the following figure.

19

Installation Guide

: Center of screen

: Top of projector

: Top of Control Pad

: Bottom of Control Pad

: Remote control light-emitting area

Align the top of the projector with the top of the Control Pad, and point the Control Pad's remote control light-emitting area at the projector.

cWhen installing the Touch Unit, do not install the Control Pad on the projection screen and the surrounding area (shaded area in the following figure) (EB-1430Wi only). The Touch Unit will not operate correctly.

[Unit: mm]

When Projected Image is Smaller than 75 Inches

Mount the 3-axis adjustment unit at the position marked with a stamp ( ).

The projection distance table provides the figures when mounting the 3-axis adjustment unit at the position marked with a stamp ( ). The numbers on the arm slide scale (b) differ from the projection distance (a).

The distance (c) from the projected image to the wall plate is the number given when the vertical slide is set to the standard position ().

Match the notch on the setting plate to the position of the stamp on the wall plate.

20

Installation Guide

16:10 projected image

					[Unit: cm]
	S	a	b	c	h
Projected image size		Projection Dis	Numbers on the	Distance from	Height of projec
		tance	arm slide scale	projected image	ted image
		Minimum (Wide)		to wall plate
		to Maximum
		(Tele)
60"	129.2x80.8	6.2 - 19.3	14.9 - 28.0	17.4	80.8
61"	131.4x82.1	6.9 - 20.1	15.6 - 28.8	17.7	82.1
62"	133.5x83.5	7.5 - 20.9	16.2 - 29.6	17.9	83.5
63"	135.7x84.8	8.1 - 21.8	16.8 - 30.5	18.2	84.8
64"	137.9x86.2	8.7 - 22.6	17.4 - 31.3	18.5	86.2
65"	140.0x87.5	9.3 - 23.5	18.0 - 32.2	18.7	87.5
66"	142.2x88.8	10.0 - 24.3	18.7 - 33.0	19.0	88.8
67"	144.3x90.2	10.6 - 25.1	19.3 - 33.8	19.3	90.2
68"	146.5x91.5	11.2 - 26.0	19.9 - 34.7	19.5	91.5
69"	148.6x92.9	11.8 - 26.8	20.5 - 35.5	19.8	92.9
70"	150.8x94.2	12.4 - 27.6	21.1 - 36.3	20.1	94.2
71"	152.9x95.6	13.1 - 28.5	21.8 - 37.2	20.3	95.6
72"	155.1x96.9	13.7 - 29.3	22.4 - 38.0	20.6	96.9
73"	157.2x98.3	14.3 - 30.2	23.0 - 38.9	20.9	98.3
74"	159.4x99.6	14.9 - 31.0	23.6 - 39.7	21.1	99.6

Images smaller than 60 inches are not projected correctly.

16:9 projected image

					[Unit: cm]
	S	a	b	c	h
Projected image size		Projection Dis	Numbers on the	Distance from	Height of projec
		tance	arm slide scale	projected image	ted image
		Minimum (Wide)		to wall plate
		to Maximum
		(Tele)
59"	130.6x73.5	6.6 - 19.8	15.3 - 28.5	21.7	73.5

21

Installation Guide

			S	a	b	c	h
		Projected image size		Projection Dis	Numbers on the	Distance from	Height of projec
				tance	arm slide scale	projected image	ted image
				Minimum (Wide)		to wall plate
				to Maximum
				(Tele)
		60"	132.8x74.7	7.3 - 20.7	16.0 - 29.4	22.0	74.7
		61"	135.0x76.0	7.9 - 21.5	16.6 - 30.2	22.3	76.0
		62"	137.3x77.2	8.6 - 22.4	17.3 - 31.1	22.7	77.2
		63"	139.5x78.5	9.2 - 23.3	17.9 - 32.0	23.0	78.5
		64"	141.7x79.7	9.8 - 24.1	18.5 - 32.8	23.4	79.7
		65"	143.9x80.9	10.5 - 25.0	19.2 - 33.7	23.7	80.9
		66"	146.1x82.2	11.1 - 25.8	19.8 - 34.5	24.1	82.2
		67"	148.3x83.4	11.7 - 26.7	20.4 - 35.4	24.4	83.4
		68"	150.5x84.7	12.4 - 27.6	21.1 - 36.3	24.8	84.7
		69"	152.8x85.9	13.0 - 28.4	21.7 - 37.1	25.1	85.9
		70"	155.0x87.2	13.7 - 29.3	22.4 - 38.0	25.4	87.2
		71"	157.2x88.4	14.3 - 30.1	23.0 - 38.8	25.8	88.4
		72"	159.4x89.7	14.9 - 31.0	23.6 - 39.7	26.1	89.7
		73"	161.6x90.9	15.6 - 31.1	24.3 - 39.8	26.5	90.9
		74"	163.8x92.1	16.2 - 31.1	24.9 - 39.8	26.8	92.1

Images smaller than 59 inches are not projected correctly.

4:3 projected image

					[Unit: cm]
	S	a	b	c	h
Projected image size		Projection Dis	Numbers on the	Distance from	Height of projec
		tance	arm slide scale	projected image	ted image
		Minimum (Wide)		to wall plate
		to Maximum
		(Tele)
53"	107.7x80.8	6.2 - 19.3	14.9 - 28.0	17.4	80.8
54"	109.7x82.3	6.9 - 20.2	15.6 - 28.9	17.7	82.3
55"	111.8x83.8	7.6 - 21.2	16.3 - 29.9	18.0	83.8
56"	113.8x85.3	8.3 - 22.1	17.0 - 30.8	18.3	85.3
57"	115.8x86.9	9.1 - 23.1	17.8 - 31.8	18.6	86.9
58"	117.9x88.4	9.8 - 24.0	18.5 - 32.7	18.9	88.4
59"	119.9x89.9	10.5 - 25.0	19.2 - 33.7	19.2	89.9
60"	121.9x91.4	11.2 - 25.9	19.9 - 34.6	19.5	91.4
61"	124.0x93.0	11.9 - 26.9	20.6 - 35.6	19.8	93.0
62"	126.0x94.5	12.6 - 27.8	21.3 - 36.5	20.1	94.5
63"	128.0x96.0	13.3 - 28.8	22.0 - 37.5	20.4	96.0

22

					Installation Guide
	S	a	b	c	h
Projected image size		Projection Dis	Numbers on the	Distance from	Height of projec
		tance	arm slide scale	projected image	ted image
		Minimum (Wide)		to wall plate
		to Maximum
		(Tele)
64"	130.0x97.5	14.0 - 29.7	22.7 - 38.4	20.7	97.5
65"	132.1x99.1	14.7 - 30.7	23.4 - 39.4	21.0	99.1
66"	134.1x100.6	15.4 - 31.1	24.1 - 39.8	21.3	100.6
67"	136.1x102.1	16.1 - 31.1	24.8 - 39.8	21.6	102.1
68"	138.2x103.6	16.8 - 31.1	25.5 - 39.8	21.9	103.6
69"	140.2x105.2	17.5 - 31.1	26.2 - 39.8	22.2	105.2
70"	142.2x106.7	18.2 - 31.1	26.9 - 39.8	22.5	106.7
71"	144.3x108.2	18.9 - 31.1	27.6 - 39.8	22.8	108.2
72"	146.3x109.7	19.6 - 31.1	28.3 - 39.8	23.2	109.7
73"	148.3x111.3	20.3 - 31.1	29.0 - 39.8	23.5	111.3
74"	150.4x112.8	21.0 - 31.1	29.7 - 39.8	23.8	112.8

Images smaller than 53 inches are not projected correctly.

c• The values are only rough estimates. The value may differ depending on the location where you place the projector.

•When projecting in Tele, the quality of the projected images may decrease.

•When projecting images at 4:3, the images are resized automatically and the quality of the projected images may decrease.

When Projected Image is Larger than 75 Inches

Mount the 3-axis adjustment unit at the position marked with a stamp ( ).

The projection distance table provides the figures when mounting the 3-axis adjustment unit at the position

marked with a

stamp (

). The numbers on the arm slide scale (b) is the same as the projection

distance (a).

The distance (c) from the projected image to the wall plate is the number given when the vertical slide is set to the standard position ( ).

Match the notch on the setting plate to the position of the stamp on the wall plate.

23

Installation Guide

16:10 projected image

						[Unit: cm]
	S	a		b	c	h
Projected image size		Projection Dis		Numbers on the	Distance from	Height of projec
		tance		arm slide scale	projected image	ted image
		Minimum (Wide)			to wall plate
		to Maximum
		(Tele)
75"	161.5x101.0	15.5 - 31.1			21.4	101.0
76"	163.7x102.3	16.2 - 31.1			21.7	102.3
77"	165.9x103.7	16.8 - 31.1			21.9	103.7
78"	168.0x105.0	17.4 - 31.1			22.2	105.0
79"	170.2x106.3	18.0 - 31.1			22.5	106.3
80"	172.3x107.7	18.7 - 31.1			22.7	107.7
81"	174.5x109.0	19.3 - 31.1			23.0	109.0
82"	176.6x110.4	19.9 - 31.1			23.3	110.4
83"	178.8x111.7	20.5 - 31.1			23.5	111.7
84"	180.9x113.1	21.1 - 31.1			23.8	113.1
85"	183.1x114.4	21.8 - 31.1			24.1	114.4
86"	185.2x115.8	22.4 - 31.1			24.3	115.8
87"	187.4x117.1	23.0 - 31.1			24.6	117.1
88"	189.5x118.5	23.6 - 31.1			24.9	118.5
89"	191.7x119.8	24.2 - 31.1			25.2	119.8
90"	193.9x121.2	24.9 - 31.1			25.4	121.2
91"	196.0x122.5	25.5 - 31.1			25.7	122.5
92"	198.2x123.9	26.1 - 31.1			26.0	123.9
93"	200.3x125.2	26.7 - 31.1			26.2	125.2
94"	202.5x126.5	27.3 - 31.1			26.5	126.5
95"	204.6x127.9	28.0 - 31.1			26.8	127.9
96"	206.8x129.2	28.6 - 31.1			27.0	129.2
97"	208.9x130.6	29.2 - 31.1			27.3	130.6
98"	211.1x131.9	29.8 - 31.1			27.6	131.9
99"	213.2x133.3	30.4 - 31.1			27.8	133.3
100"	215.4x134.6		31.1*		28.1	134.6

24

Installation Guide

* Figure for Wide (maximum zoom).

Images larger than 100 inches are not projected correctly.

16:9 projected image

					[Unit: cm]
	S	a	b	c	h
Projected image size		Projection Dis	Numbers on the	Distance from	Height of projec
		tance	arm slide scale	projected image	ted image
		Minimum (Wide)		to wall plate
		to Maximum
		(Tele)
75"	166.0x93.4	16.8 - 31.1		27.2	93.4
76"	168.2x94.6	17.5 - 31.1		27.5	94.6
77"	170.5x95.9	18.1 - 31.1		27.8	95.9
78"	172.7x97.1	18.8 - 31.1		28.2	97.1
79"	174.9x98.4	19.4 - 31.1		28.5	98.4
80"	177.1x99.6	20.0 - 31.1		28.9	99.6
81"	179.3x100.9	20.7 - 31.1		29.2	100.9
82"	181.5x102.1	21.3 - 31.1		29.6	102.1
83"	183.7x103.4	21.9 - 31.1		29.9	103.4
84"	186.0x104.6	22.6 - 31.1		30.3	104.6
85"	188.2x105.8	23.2 - 31.1		30.6	105.8
86"	190.4x107.1	23.9 - 31.1		30.9	107.1
87"	192.6x108.3	24.5 - 31.1		31.3	108.3
88"	194.8x109.6	25.1 - 31.1		31.6	109.6
89"	197.0x110.8	25.8 - 31.1		32.0	110.8
90"	199.2x112.1	26.4 - 31.1		32.3	112.1
91"	201.5x113.3	27.0 - 31.1		32.7	113.3
92"	203.7x114.6	27.7 - 31.1		33.0	114.6
93"	205.9x115.8	28.3 - 31.1		33.3	115.8
94"	208.1x117.1	29.0 - 31.1		33.7	117.1
95"	210.3x118.3	29.6 - 31.1		34.0	118.3
96"	212.5x119.5	30.2 - 31.1		34.4	119.5
97"	214.7x120.8	30.9 - 31.1		34.7	120.8

Images larger than 97 inches are not projected correctly.

4:3 projected image

[Unit: cm]

25

Installation Guide

			S	a	b	c	h
		Projected image size		Projection Dis	Numbers on the	Distance from	Height of projec
				tance	arm slide scale	projected image	ted image
				Minimum (Wide)		to wall plate
				to Maximum
				(Tele)
		75"	152.4x114.3	21.7 - 31.1		24.1	114.3
		76"	154.4x115.8	22.4 - 31.1		24.4	115.8
		77"	156.5x117.3	23.1 - 31.1		24.7	117.3
		78"	158.5x118.9	23.8 - 31.1		25.0	118.9
		79"	160.5x120.4	24.5 - 31.1		25.3	120.4
		80"	162.6x121.9	25.2 - 31.1		25.6	121.9
		81"	164.6x123.4	25.9 - 31.1		25.9	123.4
		82"	166.6x125.0	26.6 - 31.1		26.2	125.0
		83"	168.7x126.5	27.3 - 31.1		26.5	126.5
		84"	170.7x128.0	28.0 - 31.1		26.8	128.0
		85"	172.7x129.5	28.7 - 31.1		27.1	129.5
		86"	174.8x131.1	29.4 - 31.1		27.4	131.1
		87"	176.8x132.6	30.1 - 31.1		27.7	132.6
		88"	178.8x134.1	30.8 - 31.1		28.0	134.1

Images larger than 88 inches are not projected correctly.

c• The values are only rough estimates. The value may differ depending on the location where you place the projector.

•When projecting in Tele, the quality of the projected images may decrease.

•When projecting images at 4:3, the images are resized automatically and the quality of the projected images may decrease.

26

Installation Guide

Installing the Setting Plate

Connecting Devices

Necessary cables

Prepare the necessary cables according to the devices being used.

•Power cord supplied (necessary)

•USB cable supplied

•Touch Unit connection cable supplied (EB-1430Wi only)

•Optional computer cables, Remote control cable set, and other cables (prepare according to the connected devices)

For details, see the projector's User's Guide (on the Document CD-ROM).

Necessary cables when using the Easy Interactive Function

When performing mouse operations using the Easy Interactive Function, you need a power cord and USB cable. Even when projecting using a computer cable, a USB cable is necessary to perform mouse operations.

27

Installation Guide

Necessary cables when installing the Control Pad

•When projecting images from a USB storage device, or when saving data to the USB storage device, you need the USB cable supplied ( ).

•When supplying power from the projector, you need the optional Remote control cable set (ELPKC28) ( ).

•When projecting computer images (USB Display), or performing mouse operations using the Easy Interactive Function, you need the USB cable supplied ( ).

•When printing the projected image, you need the USB cable supplied. To connect the Control Pad and the printer, use the USB cable supplied with the printer ( ).

cThe following Epson projectors can be connected to the Control Pad. Check the rating label on the projector.

•H480x (where x is one letter from A to Z)

•H481x (where x is one letter from A to Z)

•H612x (where x is one letter from A to Z)

•H665x (where x is one letter from A to Z)

This information is current as of May 30th, 2014. If you want to connect a different projector or if you have any queries, contact your local dealer from the Epson Projector Contact List provided on the Document CD-ROM.

28