EnGenius® Quick Installation Guide
EAP300 802.11b/g/n Wireless Access Point
Package Contents
Unpack the box and verify the contents:
• EAP300 802.11b/g/n Wireless Access Point
• Category 5 Ethernet Cable
• Power Adaptor
• Wall Mount Kit
• EAP300 802.11b/g/n Wireless Access Point Quick Installation Guide
• EAP300 802.11b/g/n Wireless Access Point Instruction Manual
• Resource CD
Setting Up the EAP300
After verifying the contents of the box, continue on to setting up the EAP300.
Hardware Installation
1) Ensure that the computer in use has an Ethernet Card (RJ-45 Ethernet Port). For more
information, verify with User Manual.
2) Connect one end of the Category 5e Ethernet cable into RJ-45 port of the EAP300 and the other
end to the RJ-45 port on the computer that will use the EAP300. Ensure that the cable is securely
connected to both the EAP300 and the Computer.
3) Connect the Power Adaptor DC Inlet to the DC-IN port of the EAP300 and the Power Adaptor to
the electrical out. Once both connections are secure, verify the following:
a) Ensure that the Power light on the right is on (it will be blue).
b) Ensure that the Wireless light on the left is on (it will be blue).
c) Ensure that the LAN (Computer/EAP300 Connection) light in the middle is on (it will be
blue).
d) Once all three lights are on, proceed to setting up the computer.
http://192.168.1.1
Computer Setup
1) After ensuring the EnGenius device is powered on and plugged in, ensure that your computer is
on.
2) For the next steps, refer to your Operating System User Manual.
3) Once your computer is on, ensure that your TCP/IP is set to On or Enabled. (In the control panel,
double click Network Connections and then double click on the connection of your Network
Interface Card (NIC). Select Internet Protocol (TCP/IP) and then click on the Properties button.)
4) If your PC is already on a computer network, ensure that you have set it to a Static IP Address on
the interface (or Ethernet card that will use the EAP300) as 192.168.1.21 and the Subnet Mask
address as 255.255.255.0. (Select Use the following IP Address radio button). Once the
computer has been prepared, proceed to setting up the EAP300.
EAP300 Setup
1) To configure EAP30 0, ope n a web bro wser (example: Microsoft Internet Ex p lore r , Mo zill a Firefox,
Google Chrome, etc.).
2) In the address bar of the web browser, enter 192.168.1.1 (the default IP address of the EAP300)
and hit enter.
3) A login screen will appear. By default, the username of the EAP300 is admin and the password is
admin. Enter the current username and password of the EAP300 and then click Login. Refer to
the EAP300 user manual on how to change the
username and password.
4) After clicking Login with the correct username and
password, the EAP300 Main Menu will appear. If you are
successful, proceed to setting up the wireless
connection.
Wireless Setup
1) To setup the wireless connection, select Wireless on the
main menu. After selecting Wireless, select Basic.
2) Ensure that the Radio is set to Enable.
3) Select the wireless band you want (by default, it is set to 2.4 GHz B+G+N).
4) Enter the number of Wireless Points by changing the value in Enabled ESSID#.
5) Name the wireless connection by entering the name in the fields: ESSID1, ESSID2, ESSID3,
and/or ESSID4. (Note: This only applies if you have multiple SSID).
6) Click Apply.
7) All basic setup is completed. Note: The wireless connection is not secure. To setup security on
the EAP300, refer to the EAP300 User Manual. Also, to share internet connection, the Ethernet
Card that the EAP300 must be bridge to another Ethernet Card with an internet connecti on. Refer
to your Operating System User Manual for more information.
Loading...