Emerson PD1710 User Manual

Size:
371.48 Kb
Download

PLAYING COMPACT DISCS

NOTE: Although this portable CD player can readCD-RandCD-RWdiscs, in addition to normal CDs, the playability ofCD-RandCD-RWdiscs may be effected by the type of software that was used to create the discs, as well as the quality and condition of the blank media you are using. 100% playability cannot be guaranteed. This is not an indication of a problem with the player.

NORMAL PLAYBACK

1.) Move the FUNCTION selector to theCD position. ThePOWER Indicator comes “On”

2.) Open the CD door by lifting the notch at right side of CD door. If you have not already removed the white transit card from the CD player, please remove it now.

3.) Place your CD on the center spindle with the printed label side facing up. Close the CD door. The player will read the Table of Contents and the display will show the total number of tracks on the disc. If the disc is damaged or up side down, display shows “”.

4.) Press the CD PLAY/PAUSE button to begin playback on Track 1. The play “Dot” Indicator appears in the display.

To skip to higher or lower numbered tracks during playback press the or

button repeatedly until the desired track number appears in the display. Playback will begin on the selected track.

To search rapidly forward or backward during playback to locate a specific portion of a track, depress and hold the orbutton. The player will search rapidly forward or backward as long as the buttons are depressed. Normal speed playback will resume when the buttons are released.

To Pause momentarily during playback press the PLAY/PAUSE button again. The sound stops and the play “Dot” Indicator

flashes, however the disc continues to spin. To cancel Pause and resume normal playback press the PLAY/

PAUSE button once more. Normal playback resumes and the play “Dot” Indicator stops flashing.

5.) Adjust the VOLUME andBASS BOOST controls as desired.

10

PD1710_010504.p65

10

 

5/1/2004, 15:55

 

 

 

 

 

 

 

 

 

 

6.) To Stop playback at any time press the STOP button. The disc stops and the display again shows the total number of tracks on the disc. After the last track has played the disc stops automatically and the display again shows the total number of tracks on the disc.

7.) Open the CD door, remove your disc, and close the CD door again.

8.) Move the FUNCTION selector to theOFF position to shut the power ‘Off’.

TO START PLAYBACK FROM A SPECIFIC TRACK

Insert your disc in the player, close the door, and wait until the display shows the total tracks. Press either the orbutton until the desired track number appears in the display, then press thePLAY/PAUSE button to begin playback on that track.

REPEAT PLAYBACK

You can program the player to repeat either a single track or all tracks on the disc continuously. The Repeat feature can be activated while the disc is playing or while the disc is stopped.

One Track Repeat

Press the REPEAT button once. TheREPEAT Indicator flashes. Select the track you wish to repeat with theorbuttons and then press thePLAY/PAUSE

button. The selected track will be repeated continuously.

To cancel One Track Repeat press the STOP button once. TheREPEAT Indicator goes “Off”.

ALL Tracks Repeat

Press the REPEAT button twice. TheREPEAT Indicator lights solid. Press the

PLAY/PAUSE button to begin playback. The entire disc will be repeated continuously.

To cancel All Tracks Repeat press the STOP button once. TheREPEAT Indicator goes “Off”.

11

PD1710_010504.p65

11

 

5/1/2004, 15:55

 

 

 

 

 

 

 

 

 

 

PROGRAMMED PLAYBACK

You can program up to 20 tracks on a disc to playback in any desired order. You may also program a specific track to play several times within the same program.

Note: The player cannot be programmed while a disc is playing. If a disc is playing press theSTOP button to stop playback before you begin the programming steps below.

1.) Move the FUNCTION selector toCD, insert your disc in the player, close the door, and wait until the total track number appears in the display.

PROG.

2.) Press the PROG. button once. ThePROG. Indicator and program memory “0” begin flashing in the display.

PROG.

3.) Use the /buttons to select the first track to be programmed. (Example: Track 8).

4.) When track number “8” flashes in the display, press the

 

 

PROG.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

PROG. button once again to enter the track “8”in program

 

 

 

 

 

 

 

 

 

 

 

 

 

 

memory number “01”. Track number “8” disappears and

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

“0” flashes again in the display, indicating that you may

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

now select a track to be entered in program memory

 

 

 

 

 

 

 

number “02”.

 

 

 

 

 

 

 

5.) Use the orbuttons to select the next track to be programmed. When the desired track number appears in the display press thePROG. button again to enter that track in the program memory.

PROG.

6.) Repeat Step 5 until you have entered up to 20 tracks in the program memory. When the memory is full, the “andPROG. indicator flash.

12

PD1710_010504.p65

12

 

5/1/2004, 15:55

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

7.) To begin programmed playback press the PLAY/PAUSE

 

 

 

 

 

PROG.

 

 

 

button. The LCD display will show the first

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

programmed track and playback will begin on that track.

 

 

 

 

 

 

 

 

 

 

 

The PROG. Indicator flashes.

 

 

 

 

 

 

 

 

 

 

After the last programmed track has played the player stops but the programmed tracks remain in the memory. To play the programmed tracks again, press the PROG. button and then thePLAY/PAUSE button.

To cancel the programmed sequence from memory, press the STOP button at programming mode, open the CD door, or move theFUNCTION selector to theOFF position.

Program Repeat Playback

You can use the Program and Repeat features together to continuously repeat a programmed sequence of tracks.

First, program the desired tracks according to Steps 1 through 7 on pages 12-13.

When Programmed Playback begins press the REPEAT button twice to activate the All Tracks Repeat feature.PROG.

The REPEAT Indicator lights and all the tracks in your programmed sequence will be repeated continuously.

REPEAT

To cancel Programmed Repeat Playback press the STOP button until both thePROG. andREPEAT Indicators go ‘Off’.

13

PD1710_010504.p65

13

 

5/1/2004, 15:55

 

 

 

 

 

 

 

 

 

 

STEREO HEADPHONE JACK

Connect a set of stereo headphones (not included) with a 3.5mm mini plug to the

PHONES jack (located at back panel) for private listening without disturbing

others. Before putting on the headphones reduce the VOLUME control to a low level, then put the headphones on and gradually increase theVOLUME control to a comfortable listening level. The built in speakers are automatically disconnected when headphones are connected to the headphone jack.

14

PD1710_010504.p65

14

 

5/1/2004, 15:55

 

 

 

 

 

 

 

 

 

 

CARE AND MAINTENANCE

COMPACT DISC CARE

To remove a disc from its storage case, press down on the center of the case and lift the disc out, holding it carefully by the edges.

Fingerprints and dust should be carefully wiped off the disc’s recorded surface with a soft cloth.Unlike conventional records, compact discs have no grooves to collect dust and microscopic debris, so gently wiping with a soft cloth should remove most particles. Wipe in a straight line from the inside to the outside of the disc. Small dust particles and light stains will have absolutely no effect on reproduction quality.

Clean the disc periodically with a soft, lint-free,dry cloth. Never use detergents or abrasive cleaners to clean the disc. If necessary, use a CD cleaning kit.

Never write on or affix labels to the surface of compact discs.

CARE OF THE CABINET

If the cabinet becomes dusty wipe it with a soft dry dust cloth. Do not use any wax, polish sprays, or abrasive cleaners on the cabinet.

CAUTION

Never allow any water or other liquids to get inside the unit while cleaning.

15

PD1710_010504.p65

15

 

5/1/2004, 15:55

 

 

 

 

 

 

 

 

 

 

TROUBLESHOOTING GUIDE

Should this unit exhibit a problem, check the following before seeking service.

Symptom

Possible Cause

Solution

Radio

 

 

Noise or sound

Station not tuned properly for

Retune the AM or FM

distorted on AM or FM

AM or FM.

broadcast station.

broadcasts.

FM: Telescopic antenna is not

Extend FM Telescopic

 

extended.

antenna.

 

AM: The bar antenna is not

Reposition the unit until

 

positioned correctly.

best reception is obtained.

AM or FM, no sound.

FUNCTION switch is not set to

Set FUNCTION switch to

 

AM or FM.

AM or FM position.

 

Volume at minimum.

Increase Volume.

Compact Disc Player

 

 

CD Player will not play.

FUNCTION switch is not set to

Set FUNCTION switch to

 

CD.

CD.

 

CD is not installed or installed

Insert CD with Iabel side

 

incorrectly.

up.

CD skips while playing.

Disc is dirty or scratched.

Wipe disc with cloth or use

 

 

another disc.

 

TO FIND THE LOCATION AND PHONE

 

R NUMBER OF YOUR NEAREST SERVICE

SERVICE

CENTER PERMITTED TO PERFORM

WARRANTY...

 

 

CALL TOLL FREE: 1-800-695-0098

FOR ADDITIONAL SET-UPOR OPERATING ASSISTANCE

PLEASE CALL:

1-800-898-9020

FOR CUSTOMER SERVICE, PLEASE WRITE TO:

Emerson Radio Corp.

Consumer Affairs Dept.

1901 Diplomat Drive,

Farmers Branch, TX 75234.

16

PD1710_010504.p65

16

 

5/1/2004, 15:55

 

 

 

 

 

 

 

 

 

 

LIMITED WARRANTY

Emerson Radio Corp. warrants manufacturing defects in original material, including

original parts and workmanship, under normal use and conditions, for a period ofninety (90) days from the date of original purchase in the U.S. With your dated

proof of purchase, we will provide repair service at no charge for labor and parts at

an authorized Depot Repair Facility, or replace the product in our discretion. For

repair or replacement, pack your unit in a padded box, enclose your check ormoney order payable to Emerson Radio Corp. in the amount of $9.00 (not required

by California residents) to cover shipping and handling costs, and enclose a copyof your proof of purchase. Send your unit to:

Emerson Radio Corp.

1901 Diplomat Drive.

Farmers Branch, TX 75234.

This warranty does not cover damage from negligence, misuse, abuse, accident,

failure to follow operating instructions, commercial use, rental, repairs by anunauthorized facility, or products purchased, used, serviced or damaged outside

of the United States.

THIS WARRANTY GIVES YOU SPECIFIC LEGAL RIGHTS, AND YOU MAYALSO HAVE OTHER RIGHTS WHICH VARY FROM STATE TO STATE.

AU898M

17

PD1710_010504.p65

17

 

5/1/2004, 15:55

 

 

 

 

 

 

 

 

 

 

R

EMERSON

 

 

 

 

 

Part No.: 16-2920

 

 

 

 

 

401-01

 

 

 

 

Printed in China

PD1710_010504.p65

18

 

 

5/1/2004, 15:55