Emerson Liebert IntelliSlot WEB-485 User Manual

Size:
524.37 Kb
Download

LIEBERTINTELLISLOT® WEB/485 CARDWITHADAPTER

Product Specification/Installation Sheet

Description

The IntelliSlot Web/485 Card with Adapter provides 10/100baseT Ethernet Network and Modbus connectivity for your Emerson Network Power equipment.

Operating status is monitored and alarms are communicated via the network, using SNMP and/or HTTP protocols and over RS-485using the Modbus protocol.

Additional Features

• SNMP v1, v2c with MIB-IIsupport

• BootP, DHCP per RFC2131

• HTTP/HTTPS 1.1

• Secure Sockets (SSL)

• Telnet

• Remote firmware updates via HTTP

Compatibility With Other Emerson Network Power Products

Precision Cooling Unit (Controller*)

*Controller Codes

Large UPS

 

 

 

 

 

Liebert Challenger™ 3000 (L00, L15,

L00: Level 00

Liebert Npower™

LSM, LAM)

L0B: Level 0B

Liebert Series 300™

Liebert DataMate™ (L0B)

L10: Level 10

• Liebert Series 600™/610™ (Single Module)

• Liebert Deluxe System/3™ (L10, L15,

• Liebert Series 610 System Control Cabinet

L15: Level 15

 

LSM, LAM)

 

(Multi-Module)

Liebert Himod™ (LAM)

LSM: Standard

Hiross 7200 (EMEA)

Liebert Industrial Cooling Series™

Microprocessor

Hiross HiPulse™ (EMEA)

 

(L10, LSM, LAM)

 

 

 

 

LAM: Advanced

Power Management

Liebert Mini-Mate™(L0B)

Microprocessor

 

 

Liebert Datawave®

Liebert Mini-Mate2™(MM2)

 

Liebert FPC™

• Liebert Mini-Mate28 Ton (L8T)

 

 

• Liebert Precision Power Center™

Hiross™ Microface IGMnet

 

 

• Liebert Static Transfer Switches:

PEC/Atlas™ (CEMS100/LECS15)

 

 

 

STS™, STS2-3pole, STS2/PDU

 

 

 

 

Overall and Mounting Dimensions

7" (177.8mm)

 

0.6" (15.3mm)

 

2.8"

3.4"

(71.1mm)

(86.4mm)

 

0.8" (20.3mm)

Six holes, each

2.4"

0.156" diameter

 

(61mm)

 

4"

 

(101.6mm)

0.4" (10.2mm) 0.2" (5mm)

3.2"

(81.3mm)

1

Customer Wiring

Input power(input to TB3)

Pin 1(+)

Pin 2(-)Pin 3 (NC)

Modbus output for BMS

(output from TB2)

TB1: Pin 1 (+), Pin 2 (-)

TB2: Pin 1 (+), Pin 2 (-)

Network port for NMS and Web access

DTE serial port for configuration

(requires null-modemconnection)

IGMnet or Liebert SiteScan® Comms from unit (input to TB1 or P1)

Refer to user manual for details

Specifications

Power

AC Inputs

18 - 24 VAC; 50/60 Hz

DC Inputs

12 - 36VDC

Requirements

 

 

Power Consumption

6VA maximum

 

 

 

 

Dimensions - W x D x H: in. (mm)

7 x 4 x 1.5 (178 x 102 x 38)

Weight

Net - oz. (kg)

7 (0.2)

 

 

Shipping - lb. (kg)

1.3 (0.6)

 

 

 

 

Ambient Operating Environment, °F (°C)

32 to 104 (0 to 40); 10% to 90% RH (non-condensing)

Ambient Storage Temperature, °F (°C)

-4to 140(-20to 60)

Protection

 

SELV Isolated User Connections, Watchdog Timer Circuitry

 

Service Terminal (RS-232)

DB9F, DTE

Communication

Unit Input

TB1, 2-PositionTerminal Block

Communications

P1, 20-PINVertical Header with Ejection Latches (for some UPS models)

Ports

 

 

Modbus (RS-485)

TB2, 2-PositionTerminal Block

 

 

 

 

 

Ethernet Communications

RJ45

 

 

 

Wiring Specifications

Connection

Supported Wire Types

Maximum Wire Length

 

 

 

TB1 (RS-422)

18-22AWG Stranded & Shielded;18 AWG* recommended

1000 ft. (300m)

Non Plenum - Belden 9461; Plenum - Belden 88761

 

 

TB2 (RS-485)

18-22AWG Stranded & Shielded;18 AWG* recommended

3000 ft. (915m)

Non Plenum - Belden 9461; Plenum - Belden 88761

 

 

TB3 (Power Input)

18-22AWG Stranded & Shielded;18 AWG* recommended

20 ft. (6m)

Non Plenum - Belden 8770; Plenum - Belden 88770

 

 

DB9F Connector

DTE Null Modem Cable

50 ft. (15m)

 

 

 

RJ45 Connector

Standard Category 5 Cable

328 ft. (100m)

 

 

 

Liebert Corporation

1050 Dearborn Drive

Telephone: 1-800-877-9222

P.O. Box 29186

Facsimile: 1-614-841-6022

Columbus, OH 43229

www.liebert.com

© 2007 Liebert Corporation

All rights reserved throughout the world. Specifications subject to change without notice.

® Liebert and the Liebert logo are registered trademarks of Liebert Corporation. All names referred to are trademarks or registered trademarks of their respective owners.

SL-29105_REV02_10-07

2