Size:
14.38 Mb
Download

5Parental Setting

Parental setting prevents your children from viewing inappropriate materials (password protected). Playback will stop if the ratings exceed the levels you set.

To set the parental level

1 In stop mode, press[SETUP] to display “TV SETUP”.

 

 

 

---TV SETUP

---

 

 

 

 

LANGUAGE

[ENGLISH]

 

 

 

 

BACK LIGHT

[BRIGHT]

 

 

 

 

COLOR TEMP.

[NORMAL]

 

 

 

 

 

 

 

DVD SETUP

 

 

 

 

 

 

 

 

 

 

 

 

 

 

2 Use[Cursor K/L] to select “DVD SETUP”, then press[ENTER].

or

---TV SETUP

---

 

 

LANGUAGE

[ENGLISH]

 

 

BACK LIGHT

[BRIGHT]

 

 

COLOR TEMP.

[NORMAL]

 

 

DVD SETUP

 

 

 

 

 

 

 

 

 

 

3Use [Cursor K/L] to select “PARENTAL”, then press

[ENTER].

SETUP

or

LANGUAGE AUDIO

PARENTAL

OTHERS

INITIALIZE

SELECT:K/L SET:ENTER

EXIT:SETUP CANCEL:RETURN

4Use [the Number buttons] to enter the4-digitnumber for your password, then press[ENTER].

SETUP PARENTAL

PASSWORD

Please enter a 4-digitpassword.

EXIT:SETUP CANCEL:RETURN

If you have set password already, use

[the Number buttons] to enter the current 4-digit password.

You cannot use the default password (4737) to play back a DVD.

5Use [Cursor K/L] to select “PARENTAL LEVEL“, then press[ENTER].

SETUP PARENTAL

or

PARENTAL LEVEL ALL PASSWORD CHANGE

SELECT:K/L SET:ENTER

EXIT:SETUP CANCEL:RETURN

 

 

INTRODUCTION

6 Use[Cursor K/L] to select the desired item, then press

[ENTER].

 

or

SETUP

PARENTAL

PARENTAL LEVEL

PREPARATION

 

3

[PG]

 

 

ALL

 

 

 

8

[ADULT]

 

 

 

7

[NC-17]

 

 

 

6

[R]

 

 

 

5

[PGR]

 

 

 

4

[PG13]

 

 

 

 

SELECT:K/L

SET:ENTER

 

 

 

EXIT:SETUP

CANCEL:RETURN

PARENTAL LEVEL

 

 

 

ALL

: all parental locks are canceled.

INITIAL

8 [ADULT]

: all ratings (adult/general/children) can

 

be played back.

 

SETTING

7 [NC-17]-2 [G]: only DVD intended for general use and

 

 

children can be played back.

 

1 [KID SAFE] : only DVD intended for children can be

 

 

played back.

 

 

TVWATCHING

7 Press[SETUP] to exit.

 

 

 

 

 

To change the password

 

 

OPTIONAL

1 Repeat steps 1 to 4 in “To set the parental level”. Use

[Cursor K/L] to select “PASSWORD CHANGE“, then

SETTING

press [ENTER].

 

 

 

 

 

 

 

or

SETUP

PARENTAL

 

PARENTAL LEVEL

ALL

 

 

 

 

PASSWORD CHANGE

 

OPERATING

 

 

SELECT:K/L

SET:ENTER

 

 

EXIT:SETUP

CANCEL:RETURN

DVD

 

 

 

 

2Use [the Number buttons]to enter the new 4-digit password, then press [ENTER].

SETUP

 

 

PARENTAL

DVD

 

 

SETTING

PASSWORD

 

Please enter a 4-digitpassword.

 

0

0

0

0

 

Don’t forget the password.

 

Press “ENTER” to activate password.

 

 

 

EXIT:SETUP CANCEL:RETURN

TROUBLESHOOTING

3 Press[SETUP] to exit.

 

 

 

 

 

 

 

Note:

 

 

 

 

DVD-videomay not respond to parental lock settings. Make

INFORMATION

sure this function works with your DVD-video.

 

• Record the password in case you forget it.

 

• If you forget the password, press [4],[7],[3],[7], then enter

 

your new password. Password will be cleared and parental

 

levels will be set to “ALL”.

 

 

 

 

• A power failure will not erase your password.

 

41

EN

DVD SETTING

5Others

You can change the other functions.

To set ANGLE ICON, AUTO POWER OFF or PROGRESSIVE

1In stop mode, press [SETUP] to display “TV SETUP”.

---TV SETUP ---

 

LANGUAGE

[ENGLISH]

 

BACK LIGHT

[BRIGHT]

 

COLOR TEMP.

[NORMAL]

 

DVD SETUP

 

 

 

AUTO POWER OFF (Default: ON)

If you select “ON”, the unit will turn itself off automatically when there is no input from the unit for 20 minutes in stop mode.

 

 

 

 

 

 

 

or

SETUP

 

OTHERS

 

 

 

 

 

 

 

 

ANGLE ICON

ON

 

 

 

 

 

 

AUTO POWER OFF

ON

 

 

 

STILL MODE

AUTO

 

 

 

PROGRESSIVE

OFF

 

 

 

 

 

 

 

 

 

 

 

SELECT:K/L

SET:ENTER

 

 

 

EXIT:SETUP

CANCEL:RETURN

PROGRESSIVE

 

 

 

 

 

(Default: OFF)

 

 

Set to “ON” to play back in progressive mode.

2Use [Cursor K/L] to select “DVD SETUP”, then press

[ENTER].

or

---TV SETUP

---

 

 

LANGUAGE

[ENGLISH]

 

 

BACK LIGHT

[BRIGHT]

 

 

COLOR TEMP.

[NORMAL]

 

 

DVD SETUP

 

 

 

 

 

 

 

 

 

 

3Use [Cursor K/L] to select “OTHERS”, then press

[ENTER].

SETUP

or

LANGUAGE AUDIO

PARENTAL

OTHERS

INITIALIZE

SELECT:K/L SET:ENTER

EXIT:SETUP CANCEL:RETURN

4Use [Cursor K/L] to select the desired item, then press[ENTER] repeatedly to change the setting.

ANGLE ICON (Default: ON)

Set to “ON” to show the angle icon when multiple camera angles are available during DVD playback.

 

 

 

 

 

 

 

or

SETUP

 

OTHERS

 

 

 

 

 

 

 

 

ANGLE ICON

ON

 

 

 

 

 

 

AUTO POWER OFF

ON

 

 

 

STILL MODE

AUTO

 

 

 

PROGRESSIVE

OFF

 

 

 

 

 

 

 

 

 

 

 

SELECT:K/L

SET:ENTER

 

 

 

EXIT:SETUP

CANCEL:RETURN

 

 

 

 

 

 

 

SETUP OTHERS

or

ANGLE ICON

ON

AUTO POWER OFF

ON

STILL MODE

AUTO

PROGRESSIVE

OFF

 

 

SELECT:K/L

SET:ENTER

EXIT:SETUP

CANCEL:RETURN

5 Press[SETUP] to exit.

To set STILL MODE

1Repeat steps 1 to 3 in “To set ANGLE ICON, AUTO POWER OFF or PROGRESSIVE”. Use [Cursor K/L] to select “STILL MODE”, then press[ENTER].

SETUP OTHERS

or

ANGLE ICON

ON

AUTO POWER OFF

ON

STILL MODE

AUTO

PROGRESSIVE

OFF

 

 

SELECT:K/L

SET:ENTER

EXIT:SETUP

CANCEL:RETURN

2Use [Cursor K/L] to select the desired still mode, then press[ENTER].

or

SETUP

OTHERS

 

 

 

 

 

STILL MODE

 

 

AUTO

FIELD

FRAME

SELECT:K/L SET:ENTER

EXIT:SETUP CANCEL:RETURN

AUTO : Selects the best resolution setting automatically.

FIELD : The picture in the still mode will be stabilized.FRAME : The picture in the still mode will be highly

defined.

3 Press[SETUP] to exit.

42

EN

5Reset to the Default Setting

You can reset all the settings except for the parental setting and on-screenlanguage.

1In stop mode, press [SETUP] to display “TV SETUP”.

---TV SETUP ---

 

LANGUAGE

[ENGLISH]

 

BACK LIGHT

[BRIGHT]

 

COLOR TEMP.

[NORMAL]

 

DVD SETUP

 

2Use [Cursor K/L] to select “DVD SETUP”, then press

[ENTER].

or

---TV SETUP

---

 

 

LANGUAGE

[ENGLISH]

 

 

BACK LIGHT

[BRIGHT]

 

 

COLOR TEMP.

[NORMAL]

 

 

DVD SETUP

 

 

 

 

 

 

 

 

 

 

3Use [Cursor K/L] to select “INITIALIZE”, then press

[ENTER].

SETUP

or

LANGUAGE AUDIO

PARENTAL

OTHERS

INITIALIZE

SELECT:K/L SET:ENTER

EXIT:SETUP CANCEL:RETURN

4 Use[Cursor K/L] to select “YES”, then press[ENTER].

SETUP INITIALIZE

or

Initialize? NO

YES

SELECT:K/L SET:ENTER

EXIT:SETUP CANCEL:RETURN

5 Press[SETUP] to exit.

Note:

When you want to cancel the initialization, select “NO” at step 4, then press [SETUP].

5Language Code List

Language

Code

Language

Code

A-B

4748

Marathi

5964

Abkhazian

Moldavian

5961

Afar

4747

Mongolian

5960

Afrikaans

4752

Albanian

6563

Nauru

6047

Amharic

4759

Nepali

6051

Arabic

4764

Norwegian [NOR]

6061

Armenian

5471

O-R

 

Assamese

4765

 

Aymara

4771

Occitan

6149

Azerbaijani

4772

Oriya

6164

Bashkir

4847

Oromo(Afan)

6159

Basque

5167

Panjabi

6247

Bengali;Bangla

4860

Pashto;Pushto

6265

Bhutani

5072

Bihari

4854

Persian

5247

Bislama

4855

Polish [POL]

6258

Breton

4864

Portuguese [POR]

6266

Bulgarian

4853

Quechua

6367

Burmese

5971

Byelorussian

4851

Rhaeto-Romance

6459

C-E

5759

Romanian [RUM]

6461

Cambodian

Russian [RUS]

6467

Catalan

4947

S

 

Chinese [CHI]

7254

 

Corsican

4961

Samoan

6559

Croatian

5464

Sangho

6553

Czech [CZE]

4965

Sanskrit

6547

Danish [DAN]

5047

Scots Gaelic

5350

Dutch [DUT]

6058

Serbian

6564

English [ENG]

5160

Esperanto

5161

Serbo-Croatian

6554

Estonian

5166

Sesotho

6566

F-H

 

Setswana

6660

Faroese

5261

Shona

6560

Fiji

5256

Finnish [FIN]

5255

Sindhi

6550

French [FRE]

5264

Singhalese

6555

Frisian

5271

Siswat

6565

Galician

5358

Slovak

6557

Georgian

5747

German [GER]

5051

Slovenian

6558

Greek [GRE]

5158

Somali

6561

Greenlandic

5758

Spanish [SPA]

5165

Guarani

5360

Sundanese

6567

Gujarati

5367

Swahili

6569

Hausa

5447

Hebrew

5569

Swedish [SWE]

6568

Hindi

5455

T

 

Hungarian [HUN]

5467

Tagalog

6658

I-K

 

5565

Tajik

6653

Icelandic [ICE]

Indonesian

5560

Tamil

6647

Interlingua

5547

Tatar

6666

Interlingue

5551

Telugu

6651

Inupiak

5557

Thai

6654

Irish [IRI]

5347

Italian [ITA]

5566

Tibetan

4861

Japanese [JPN]

5647

Tigrinya

6655

Javanese

5669

Tonga

6661

Kannada

5760

Tsonga

6665

Kashmiri

5765

Turkish [TUR]

6664

Kazakh

5757

Kinyarwanda

6469

Turkmen

6657

Kirghiz

5771

Twi

6669

Kirundi

6460

U-Z

 

Korean [KOR]

5761

 

Ukrainian

6757

Kurdish

5767

L-N

 

Urdu

6764

Laothian

5861

Uzbek

6772

Latin

5847

Vietnamese

6855

Latvian;Lettish

5868

Volapuk

6861

Lingala

5860

Lithuanian

5866

Welsh

4971

Macedonian

5957

Wolof

6961

Malagasy

5953

Xhosa

7054

Malay

5965

Yiddish

5655

Malayalam

5958

Yoruba

7161

Maltese

5966

Maori

5955

Zulu

7267

Note:

• If you choose a language that has a 3-letterabbreviation, they will be displayed every time you change the audio or subtitle language setting above. If you choose any other language,‘---’will be displayed instead.(3-letterabbreviation is written in bracket.)

43

INFORMATION TROUBLESHOOTING SETTING DVD DVD OPERATING SETTING OPTIONAL TV WATCHING SETTING INITIAL PREPARATION INTRODUCTION

EN

TROUBLESHOOTING

5Troubleshooting Guide

If the unit does not perform properly when operated as instructed in this Owner’s Manual, check the following chart and all connections once before calling for service.

 

Symptom

Remedy

 

 

• Be sure the power cord is plugged in.

 

No power

• If a power failure occurs, unplug the power cord for 30 minutes to allow the unit to

 

 

reset itself.

 

 

• Check if the power is on.

 

 

 

No picture or sound

• Check if the right input mode is selected.

 

• View other TV channels. The problem might be limited to the broadcasting station.

 

 

 

 

• Turn off the power and wait for about 1 minute, then turn on the unit again.

 

No color

• View other TV channels. The problem might be limited to the broadcasting station.

 

T

• Adjust “COLOR” in the picture menu.

 

 

• Electrical interference from nearby appliances may affect picture quality.

 

 

V

Sound OK, picture poor

• Adjust “CONTRAST” and “BRIGHTNESS” in the picture menu.

 

 

• View other TV channels. The problem might be limited to the broadcasting station.

 

Ghosts, lines or streaks in

• Electrical interference from nearby appliances may affect picture quality.

 

picture

• View other TV channels. The problem might be limited to the broadcasting station.

 

Different color marks on TV

• Move your TV away from nearby electric appliances. Turn off the power and wait

 

 

30 minutes before turning it back on.

 

screen

 

• View other TV channels. The problem might be limited to the broadcasting station.

 

 

 

Picture OK, sound poor

• View other TV channels. The problem might be limited to the broadcasting station.

 

 

• Check if the audio cable is plugged in correctly .

 

 

 

 

 

 

Captions are displayed as a

• Interference from buildings or weather conditions may cause captioning to be

C

white box.

incomplete.

No caption is displayed in the

• Broadcasting station may shorten the program to insert advertisement.

A

Closed Caption-supported

The closed caption decoder cannot read the information of the shortened

P

program.

program.

T

No caption is displayed when

• The disc or cassette tape may be illegally copied, or the caption signal might not

I

playing the discs or cassette

O

tape containing captions.

have been read during copying.

N

Black box is displayed in the TV

• The text mode is selected for caption. Select “CAPTION1”, “CAPTION2”, “CAPTION3”,

 

screen.

“CAPTION4” or “OFF”.

 

 

 

 

Completely distorted picture or

• Make sure the disc is compatible with the unit.

 

black/white picture with DVD

 

 

Picture freezes momentarily

• Check the disc for finger prints/scratches and clean with a soft cloth wiping from

D

during playback.

center to edge.

V

The unit does not respond to

 

some operating commands

• Operations may not be permitted by the disc. Refer to the instructions of the disc.

 

during playback.

 

D

Angle does not switch.

• The angle cannot be switched for DVD which does not contain multiple angles. In

 

some cases multiple angles are only recorded for specific scenes.

 

 

 

The password for rating level

• Enter the default password “4737”, then your forgotten password will be cleared.

 

 

has been forgotten.

 

 

 

 

 

Note:

The LCD panel is manufactured to provide many years of useful life. Occasionally a few non active pixels may appear as a fixed point of blue, green or red. This is not to be considered a defect in the LCD screen.

Some functions are not available in specific modes, but this is not a malfunction. Read the description in this owner’s manual for more details on correct operations.

Some functions are prohibited on some discs.

44

EN

5FAQ

INTRODUCTION

Question

Answer

 

• Check the antenna or cable connection to the unit.

 

• Check the batteries of the remote control.

 

• Check if there is an obstacle between the infrared sensor window and the

 

remote control.

 

• Test the signal output .If OK, then possible infrared sensor trouble.

 

(Refer to “IR Signal Check” on page 46.)

My remote control does not work. What

• Aim the remote control directly at the infrared sensor window on the

front of the unit.

should I do?

• Reduce the distance to the unit.

 

 

Re-insertthe batteries with theirpolarities(+/-signs)as indicated.

 

• When there is an infrared-equippeddevice such as PC near this unit, it

 

may interrupt the remote control signal of this unit.

 

Move the infrared-equippeddevice away from this unit, change the

 

angle of the infrared sensor or turn off the infrared communication

 

function.

How come the Initial setup appears every

• Connect the RF cable to the unit directly and run the initial setup.

time I turn on this unit?

• Make sure to complete the channel scan before turning off the unit.

 

• Make sure auto channel scan has been completed.

 

(Refer to “Auto Channel Scan” on page 14.)

 

• Auto channel scan must be completed when you set up the unit for the

 

first time or move it to a location where previously unavailable channels

 

are broadcast.

 

• The selected channel may not be broadcasting.

Why I cannot watch some of TV programs?

• When auto channel scan is interrupted and not completed,

some channels will not be received. Make sure to complete.

 

 

(Refer to “Auto Channel Scan” on page 14.)

 

• The selected channel cannot be viewed by the V-chipsetting.

 

(Refer to “V-chip”on page 25.)

 

• The unit requires some kind of antenna input. An indoor antenna (rabbit

 

ears), an external antenna, or an RF coaxial cable from your wall or cable

 

/satellite box needs to be plugged into the unit.

How come there is no image from the

• Check if the right input mode is selected by pressing [INPUT] or using

[CH. K/ L]. (Refer to “Switching Each Input Mode” on page 15.)

connected external devices?

• Check the antenna or cable connection to the unit.

 

 

 

Whenever I entered channel number,

• Many digital channels have alternate channel numbers. The unit changes

the numbers automatically to the ones signifying the broadcasting

it changes automatically.

stations. These are the numbers used for analog broadcasts.

 

 

 

 

• Clean the disc.

 

• Ensure the disc is correctly inserted.

My disc cannot be played back.

• Check if the disc is defective by trying another disc.

• Cancel the parental lock or change the control level.

Is there any way I can play my disc?

• Insert a correct disc that plays back on this unit.

 

 

• Handle a disc with special care so that it does not have fingerprints,

 

scratches or dusts on its surface.

 

• Captions that are delayed a few seconds behind the actual dialogue are

Why are captions not displayed entirely?

common for live broadcasts. Most captioning production companies can

Or, captions are delayed behind the

display a dialogue to maximum of 220 words per minute. If a dialogue

dialogue.

exceeds that rate, selective editing is used to insure that the captions

 

remain up-todate with the current TV screen dialogue.

How can I set the clock ?

• There is no clock function on this unit.

 

 

INFORMATION TROUBLESHOOTING SETTING DVD DVD OPERATING SETTING OPTIONAL TV WATCHING SETTING INITIAL PREPARATION

45

EN

INFORMATION

5Glossary

ATSC

Acronym that stands for Advanced Television Systems Committee and the name of the digital broadcasting standards.

Aspect Ratio

The width of a TV screen relative to its height. Conventional TVs are 4:3 (in other words, the TV screen is almost square); widescreen models are 16:9 (the TV screen is almost twice as wide as its height).

Component Video

This is a video signal format that conveys each of 3 principal colors of light (red, blue and green) through different signal lines. This allows the viewers to experience picture colors as original as it is. There are several signal formats, including Y / Pb / Pr and Y / Cb / Cr.

Dolby Digital

The system developed by Dolby Laboratories to compress digital sound. It offers stereo sound (2ch) or multi-channelaudio.

HDTV (high definition TV)

Ultimate digital format that produces high resolution and high picture quality.

NTSC

Acronym that stands for National Television Systems Committee and the name of the current analog broadcasting standards.

Password

A stored 4-digitnumber that allows access to parental control features.

Region Code

Regions associate discs and players with particular areas of the world.

This unit will only play back discs that have compatible region codes.

You can find the region code of your unit by looking on the rear panel.

Some discs are compatible with more than one region (or all regions).

SAP (secondary audio program)

Second-audiochannel delivered separately frommain-audiochannel. This audio channel is used as an alternate in bilingual broadcasting.

SDTV (standard definition TV)

Standard digital format that is similar to the NTSC picture quality.

S-video

Offers higher quality images by delivering each signal, color (c) and luminance (y) independently of each other through separate cables.

5Maintenance

Cabinet Cleaning

Wipe the front panel and other exterior surfaces of the unit with a soft cloth immersed in lukewarm water and wrung dry.

Never use a solvent or alcohol. Do not spray insecticide liquid near the unit. Such chemicals may cause damage and discoloration to the exposed surfaces.

Panel Cleaning

Wipe the panel of the unit with a soft cloth. Before cleaning the panel, disconnect the power cord.

Disc Handling

Handle the discs so that fingerprints and dust do not adhere to the surfaces of the discs.

Always store the disc in its protective case when it is not used.

To clean-off,use a soft cloth.

Do not use a hard cloth since this will mar the disc.

Wipe the disc in a straight line from center to edge.

Never wipe with a circular motion.

• Do not use detergent or abrasive cleaning agents.

Servicing

Should your unit become inoperative, do not try to correct the problem yourself. There are no user serviceable parts inside. Turn off the unit, unplug the power cord and call our toll free customer support line found on the cover of this manual to locate an authorized service center.

If the Laser Optical Pickup Unit is Dirty

If the unit still does not perform properly when it is operated, while referring to the relevant sections and to "Troubleshooting Guide" in this owner’s manual, the laser optical pickup unit may be dirty. Consult your dealer or an Authorized Service Center for inspection and cleaning of the laser optical pickup unit.

IR Signal Check

If the remote control is not working properly, you can use an AM radio or digital camera (including a cellular phone with built-incamera) to see if it is sending out an infrared signal.

• With an AM radio:

Tune the AM radio station to a non-broadcastingfrequency. Point the remote control towards it, push any button and listen. If the sound from the radio flutters, it is receiving the remote control’s infrared signal.

• With a digital camera (including built-incell phone cameras):

Point a digital camera towards the remote control. Push any button on the remote control and look through the digital camera. If the infrared light

appears through the camera, the remote control is working.

46

EN

5Cable Channel Designations

If you subscribe to cable TV, the channels are displayed as 1-135.Cable companies often designate channels with letters orletter-numbercombinations. Please check with your local cable company. The following is a chart of common cable channel designations.

CATV channel

5A

2

3

4

5

6

7

8

9

10

11

12

13

A

B

C

D

E

F

G

H

TV Display

1

2

3

4

5

6

7

8

9

10

11

12

13

14

15

16

17

18

19

20

21

CATV channel

I

J

K

L

M

N

O

P

Q

R

S

T

U

V

W

W+1

W+2

W+3

W+4

W+5

W+6

TV Display

22

23

24

25

26

27

28

29

30

31

32

33

34

35

36

37

38

39

40

41

42

CATV channel

W+7

W+8

W+9

W+10

W+11

W+12

W+13

W+14

W+15

W+16

W+17

W+18

W+19

W+20

W+21

W+22

W+23

W+24

W+25

W+26

W+27

TV Display

43

44

45

46

47

48

49

50

51

52

53

54

55

56

57

58

59

60

61

62

63

CATV channel

W+28

W+29

W+30

W+31

W+32

W+33

W+34

W+35

W+36

W+37

W+38

W+39

W+40

W+41

W+42

W+43

W+44

W+45

W+46

W+47

W+48

TV Display

64

65

66

67

68

69

70

71

72

73

74

75

76

77

78

79

80

81

82

83

84

CATV channel

W+49

W+50

W+51

W+52

W+53

W+54

W+55

W+56

W+57

W+58

A-5

A-4

A-3

A-2

A-1

W+59

W+60

W+61

W+62

W+63

W+64

TV Display

85

86

87

88

89

90

91

92

93

94

95

96

97

98

99

100

101

102

103

104

105

CATV channel

W+65

W+66

W+67

W+68

W+69

W+70

W+71

W+72

W+73

W+74

W+75

W+76

W+77

W+78

W+79

W+80

W+81

W+82

W+83

W+84

W+85

TV Display

106

107

108

109

110

111

112

113

114

115

116

117

118

119

120

121

122

123

124

125

126

CATV channel

W+86

W+87

W+88

W+89

W+90

W+91

W+92

W+93

W+94

 

 

 

 

 

 

 

 

 

 

 

 

TV Display

127

128

129

130

131

132

133

134

135

 

 

 

 

 

 

 

 

 

 

 

 

5General Specifications

TV

TV format:

ATSC / NTSC-MTV standard

Closed caption system:

 

§15.122/FCC (digital CC) §15.119/FCC (analog CC)

Channel coverage (ATSC/NTSC):

Terrestrial

VHF: 2~13 UHF: 14~69

CATV

2~13, A~W, W+1~W+94 (analog W+1~W+84),

A-5~A-1,5A

Tuning system: Channel frequency synthesized tuning system Channel access: Direct access keyboard,

Programmable scan, and up/down

DVD

Discs (Playback compatibility):

DVD video, DVD-RW/-R,DVD+RW/+R, audio CD,CD-RW/-R

Frequency response:

DVD (linear sound): 20 Hz to 20 kHz (sample rate: 48 kHz)

CD:

20 Hz to 44 kHz (sample rate: 96 kHz)

20 Hz to 20 kHz

Signal-to-noiseratio (S/N ratio):

CD:

75 dB (JEITA)

Total distortion factor:

DVD:

1 KHz 0.07% (JEITA)

CD:

1 KHz 0.07% (JEITA)

5Other Specifications

Terminals:

 

 

 

 

 

Antenna input: VHF/UHF/CATV

75Ω unbalanced (F-type)

S-videoinput:

Mini DIN 4-pinjack x 1 Y:1Vp-p(75Ω)

 

Video input:

 

 

C: 286mVp-p(75Ω)

RCA jack x 1

1Vp-p(75Ω)

 

Audio input:

RCA jack x 4

500mV rms

 

Component video input:

Y: 1Vp-p(75Ω)

 

 

RCA jack x 3

 

 

 

 

Pb: 700mVp-p(75Ω)

PC input:

 

 

Pr: 700mVp-p(75Ω)

D-Sub15pin x 1 (RGB)

 

 

 

Mini jack ø3.5mm x 1 (audio)

 

Coaxial digital audio output:

 

 

 

 

RCA jack x1

500mVp-p(75Ω)

 

Headphone:

1/8 inches (3.5mm)

 

 

Remote Control:

Digital encoded infrared light system

Operating Temperature:

 

 

 

 

 

41°F (5°C) to 104°F (40°C)

 

Power Requirements:

 

 

 

 

 

120 V~AC +/- 10%, 60 Hz +/- 0.5%

Power Consumption (Maximum):

 

 

LCD:

 

65W

 

 

 

 

19 inches wide XGA plus panel

 

Dimensions:

<without stand>

<with stand>

 

H:

14 3/8 inches

(364mm)

16 inches

(404.5mm)

W:

19 5/16 inches

(490mm)

19 5/16 inches

(490mm)

D:

5 1/8 inches

(128mm)

7 11/16 inches

(194.5mm)

Weight:

 

11.1 lbs. (5.0kg)

 

 

5Electrical Specification

Sound Output:

1W, 8 Ω x 2

• Designs and specifications are subject to change without notice and without our legal obligation.

• If there is a discrepancy between languages, the default language will be English.

INFORMATION TROUBLESHOOTING SETTING DVD DVD OPERATING SETTING OPTIONAL TV WATCHING SETTING INITIAL PREPARATION INTRODUCTION

47

EN

TM

LIMITED WARRANTY

FUNAI CORP. will repair this product, free of charge in the USA in the event of defect in materials or workmanship as follows:

DURATION:

PARTS: FUNAI CORP. will provide parts to replace defective parts without charge for one (1) year from the date of original retail purchase. Certain parts and LCD imageburn-inare excluded from this warranty.

LABOR: FUNAI CORP. will provide the labor without charge for a period of ninety (90) days from the date of original retail purchase.

LIMITS AND EXCLUSIONS:

THIS WARRANTY IS EXTENDED ONLY TO THE ORIGINAL RETAIL PURCHASER. A PURCHASE RECEIPT OR OTHER PROOF OF ORIGINAL RETAIL PURCHASE WILL BE REQUIRED TOGETHER WITH THE PRODUCT TO OBTAIN SERVICE UNDER THIS WARRANTY.

This warranty shall not be extended to any other person or transferee.

This warranty is void and of no effect if any serial numbers on the product are altered, replaced, defaced, missing or if service was attempted by an unauthorized service center. This limited warranty does not apply to any product not purchased and used in the United States.

This warranty only covers failures due to defects in material or workmanship which occur during normal use. It does not cover damage which occurs in shipment, or failures which are caused by repairs, alterations or products not supplied by FUNAI CORP., or damage, which results from accident, misuse,

abuse, mishandling, misapplication, alteration, faulty installation, improper maintenance, commercial use such as hotel, rental or office use of this product, or damage which results from fire, flood, lightning or other acts of God.

THIS WARRANTY DOES NOT COVER PACKING MATERIALS, ANY ACCESSORIES (EXCEPT REMOTE CONTROL), ANY COSMETIC PARTS, COMPLETE ASSEMBLY PARTS, DEMO OR FLOOR MODELS.

FUNAI CORP. AND ITS REPRESENTATIVES OR AGENTS SHALL IN NO EVENT BE LIABLE FOR ANY GENERAL, INDIRECT OR CONSEQUENTIAL DAMAGES ARISING OUT OF OR OCCASIONED BY THE USE OF OR THE INABILITY TO USE THIS PRODUCT. THIS WARRANTY IS MADE IN LIEU OF ALL OTHER WARRANTIES, EXPRESS OR IMPLIED, AND OF ALL OTHER LIABILITIES ON THE PART OF FUNAI, ALL OTHER WARRANTIES INCLUDING THE WARRANTY OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE, ARE HEREBY DISCLAIMED BY FUNAI AND ITS REPRESENTATIVES IN THE UNITED STATES.

ALL WARRANTY INSPECTIONS AND REPAIRS MUST BE PERFORMED BY AN AUTHORIZED SERVICE CENTER. THIS WARRANTY IS ONLY VALID WHEN THE UNIT IS CARRIED-INTO AN AUTHORIZED SERVICE CENTER.

THE PRODUCT MUST BE ACCOMPANIED BY A COPY OF THE ORIGINAL RETAIL PURCHASE RECEIPT. IF NO PROOF OF PURCHASE IS ATTACHED, THE WARRANTY WILL NOT BE HONORED AND REPAIR COSTS WILL BE CHARGED.

IMPORTANT:

THIS LIMITED WARRANTY GIVES YOU SPECIFIC LEGAL RIGHTS. YOU MAY HAVE OTHER RIGHTS THAT VARY FROM STATE TO STATE. IF, AT ANY TIME DURING THE WARRANTY PERIOD, YOU ARE UNABLE TO OBTAIN SATISFACTION WITH THE REPAIR OF THIS PRODUCT, PLEASE CONTACT FUNAI CORP.

ATTENTION:

FUNAI CORP. RESERVES THE RIGHT TO MODIFY ANY DESIGN OF THIS PRODUCT WITHOUT PRIOR NOTICE.

WARRANTY STATEMENT REGARDING NON AUTHORIZED REPAIRS:

To obtain warranty service, you must take the product, or deliver the product freight prepaid, in either its original packaging or packaging affording an equal degree of protection, to any AUTHORIZED SERVICE CENTER. FUNAI CORP. will not reimburse you for any service done by unauthorized service providers without prior written approval.

To locate your nearest AUTHORIZED SERVICE CENTER or for general service inquiries, please contact us at:

 

FUNAI CORPORATION

 

Customer Service

 

Tel : 1-800-256-2487

 

www.EmersonAudioVideo.com

 

19900 Van Ness Avenue, Torrance, CA 90501

 

 

 

 

Printed in China

A84N4UH / A84N3UH / A84N1UH

 

1EMN23240A

TM

EMERSON Y EL LOGOTIPO G-CLEFSON MARCAS REGISTRADAS

DE EMERSON RADIO CORP., PARSIPPANY, NEW JERSEY, EE.UU.

Televisor Digital con pantalla LCD de 19" y Reproductor DVD Incorporado

Manual del Usuario

LD195EM8 7

LD195EM8 2

LD195EM8

 

 

 

AYUDA?

 

 

 

 

 

 

 

 

 

 

 

 

 

GRATUTITO!

 

 

 

 

AL

TELEFONO

2487

 

 

 

 

 

LLAME

 

 

 

-

 

 

 

 

 

 

 

 

 

 

256

 

 

EN

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

-

 

 

 

 

 

 

 

 

 

1

800

 

 

 

WEB

 

 

 

 

 

 

-

 

 

NUESTRO

SITIO

.com

 

 

ÓVISITE

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

.EmersonAudioVideo

 

 

 

 

 

 

www

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Discos de 5 pulgadas solamente

PARA RECIBIR LA SEÑAL DIGITAL/

ANALÓGICA, DEBE CONECTAR LA ANTENA.

PROBLEMAS DE SOLUCIÓN DVD DE AJUSTE DVD DEL UTILIZACIÓN OPCIONAL AJUSTETELEVISIÓN LA VER PARA INICIAL AJUSTE PREPARACIÓN INTRODUCCIÓN

INFORMACIÓN

© 2008 Funai Electric Co., Ltd.

INTRODUCCIÓN

El modelo y el número de serie de esta unidad se pueden encontrar

Número de modelo:

 

 

en la caja. Deberá anotar y guardar el modelo y el número de serie

 

 

Número de serie:

 

 

para consultarlos, si los necesita, en el futuro.

 

 

 

 

 

 

 

5Precauciones

ADVERTENCIA: PARA REDUCIR EL RIESGO DE QUE SE PRODUZCA UN INCENDIO O SE RECIBA UNA DESCARGA

ELÉCTRICA, NO EXPONGA ESTE APARATO A LA LLUVIA NI A LA HUMEDAD.

EL APARATO NO DEBERÁ EXPONERSE A LOS GOTEOS NI A LAS SALPICADURAS, Y ENCIMA DE ÉL NO DEBERÁN PONERSE OBJETOS CON LÍQUIDOS EN SU INTERIOR COMO, POR EJEMPLO, FLOREROS.

 

 

 

 

El símbolo del rayo con punta de flecha, en el interior de un

 

CAUTION

 

 

 

 

 

triángulo equilátero, tiene la finalidad de avisar al usuario

 

RISK OF ELECTRIC SHOCK

 

 

 

 

de la presencia de“tensión peligrosa” dentro de la caja del

 

DO NOT OPEN

 

 

aparato que podría ser de suficiente intensidad como para

 

 

 

constituir un riesgo para las personas en caso de que éstas

 

 

 

AVISO:PARA REDUCIR EL RIESGO DE SUFRIR UNA DESCARGA ELÉCTRICA

 

recibiesen una descarga eléctrica.

 

El signo de exclamación dentro de un triángulo equilátero

NO QUITE LA CUBIERTA (O EL PANEL POSTERIOR). EN EL INTERIOR DEL

 

 

tiene la finalidad de avisar al usuario de la presencia de

APARATO NO HAY PIEZAS QUE DEBA MANIPULAR EL USUARIO. SOLICITE EL

 

 

instrucciones de utilización y mantenimiento (servicio) en el

SERVICIO DE REPARACIONES AL PERSONAL DE SERVICIO CUALIFICADO.

 

 

material impreso que acompaña al aparato.

 

 

 

 

 

La marca de aviso está situada en la parte inferior o posterior de la caja.

Instrucciones de Seguridad Importantes

1.Lea estas instrucciones.

2.Guarde estas instrucciones.

3.Haga caso de todas las advertencias.

4.Siga todas las instrucciones.

5.No utilice este aparato cerca del agua.

6.Limpie el aparato con un paño seco.

7.No tape ninguna abertura de ventilación. Haga la instalación siguiendo las instrucciones del fabricante.

8.No instale el aparato cerca de fuentes de calor como, por ejemplo, radiadores, salidas de aire caliente, estufas u otros aparatos (incluyendo amplificadores) que produzcan calor.

9.No anule la función de seguridad de la clavija polarizada o con conexión a tierra. Una clavija polarizada tiene

dos patillas, una de la cuales es más ancha que la otra. Una clavija del tipo de conexión a tierra tiene dos patillas y una espiga de conexión a tierra. La patilla más ancha y la espiga se incluyen para su seguridad. Si la clavija suministrada no se puede conectar en su

toma de corriente, consulte a un electricista para que le reemplace la toma de corriente obsoleta.

10.Proteja el cable para que nadie lo pise ni sea pellizcado, particularmente en la clavija, receptáculo de conveniencia o punto por donde sale del aparato.

11.Utilice solamente los accesorios especificados por el fabricante.

12. Utilice el aparato sólo con el carrito, soporte,trípode, ménsula o mesa especificado por elfabricante, o vendido con el aparato. Cuandoutilice un carrito, tenga cuidado para moverla combinación del carrito/aparato, paraevitar causar heridas o que el aparato se caiga.

13.Desenchufe este aparato durante las tormentas eléctricas o cuando no se vaya a utilizar durante mucho tiempo.

14.Solicite todas las reparaciones al personal de servicio cualificado. Las reparaciones serán necesarias cuando el aparato se haya estropeado de cualquier forma como, por ejemplo, cuando el cable o la clavija de alimentación se hayan dañado, cuando se hayan derramado líquidos o hayan caído objetos en el interior del aparato, cuando el aparato haya estado expuesto a la lluvia o a la humedad,

cuando no funcione normalmente o cuando se haya caído.

No coloque la unidad sobre un mueble que pueda volcar si algún niño o adulto lo inclina, empuja, se coloca encima o trepa por él. La caída de la unidad puede provocar lesiones graves e incluso la muerte.

ADVERTENCIA DE LA FCC

Este aparato puede generar o utilizar energía radioeléctrica. Los cambios o las modificaciones que se hagan en este aparato podrán causar interferencias a menos que éstos sean aprobados expresamente en este manual. El usuario podrá perder la autorización que tiene para utilizar este aparato si hace algún cambio o modificación que no haya sido autorizado.

INTERFERENCIA DE RADIO Y TV

Este aparato ha sido probado y ha demostrado cumplir con los límites existentes para los dispositivos digitales de la Clase B, de conformidad con el Apartado 15 de las Normas de la FCC. Este aparato genera, utiliza y puede radiar energía radioeléctrica, y, si no se instala y utiliza de acuerdo con las instrucciones, puede causar interferencias perjudiciales

en las comunicaciones por radio. Sin embargo, no existen garantías de que no se produzcan interferencias en una instalación particular. Si este aparato causa interferencias perjudiciales en la recepción de la radio o la televisión, lo que se puede determinar apagando y luego encendiendo el aparato, al usuario se le recomienda intentar eliminar la interferencia tomando una, o más, de las medidas siguientes:

1)Cambie la orientación y la ubicación de la antena de recepción.

2)Aumente la separación entre el aparato y el receptor.

3)Conecte el aparato en una toma de corriente o circuito que sean diferentes de aquellos a los que está conectado el receptor.

4)Consulte a su concesionario o técnico en radio/TV con experiencia para solicitar su ayuda.

Este aparato digital de la clase B cumple con la norma canadiense ICES-003.

Cet appareil numérique de la classe B est conforme à la norme NMB-003du Canada.

2

ES