Emerson LD195EM8 2, LD195EM8 7 User Manual

Size:
14.38 Mb
Download

5Slow Forward / Slow Reverse

DVD

Press and hold [REV /h] or[FWD /g]

repeatedly during the pause mode to select 1 the desired forward or reverse speed.

To continue playback, press [PLAY B].

Note:

Slow forward / slow reverse speed varies with disc. Approximate speed is 1(1/16x), 2(1/8x) and 3(1/2x).

Set “STILL MODE” to “FIELD” in “OTHERS“ menu if pictures in the slow playback mode are blurred. (Refer to page 42.)

The sound will be muted during slow forward/slow reverse playback.

5Paused and Step-by-step Playback

Press [PAUSE F] during playback.

• Playback will be paused and sound will be muted.

To continue playback, press [PLAY B].

DVD

Each time you press [PAUSE F] in the pause mode, the disc goes forward one frame at a time.

To continue playback, press [PLAY B].

Note:

Set “STILL MODE” to “FIELD” in “OTHERS” menu if pictures in the pause mode are blurred. (Refer to page 42.)

5Zoom

INTRODUCTION

 

DVD

 

 

 

The zoom function allows you to enlarge the video image and to pan

 

 

through the enlarged image.

PREPARATION

 

 

 

 

 

1 During playback, press[MODE] repeatedly until

 

 

 

” appears.

 

 

 

 

 

 

 

2 x (ZOOM)

 

 

 

 

 

 

 

 

SETTING INITIAL

 

 

 

 

 

 

 

 

2 Press[ENTER] repeatedly to change the zoom factor;

 

 

 

 

“OFF“, “2x“ or “4x“.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

4 ×(ZOOM)

 

 

TV WATCHING

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

to slide the zoomed picture across the TV screen.

OPTIONAL

3 Once a desired zoom factor is set, press[RETURN ] to

 

 

display the position guide, then use [Cursor K/ L/ s/ B]

 

 

 

 

 

 

 

 

 

SETTING

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

DVD OPERATING

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

DVD

4 To exit zoom, repeat steps 1 to 2 above and press

 

[ENTER] repeatedly until “OFF“ appears.

SETTING

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Note:

 

 

TROUBLESHOOTING

 

• The gray box with an inner blue box that shows during

 

 

 

zoomed playback is the position guide indicates the position

 

 

 

of the zoomed image within the overall image.

 

 

 

Position guide stays on the TV screen until you press [ENTER].

 

 

 

Press [ENTER] one more time to recall the position guide

 

 

 

when disappears.

 

 

 

• Zoom function does not work while the disc menu is

 

 

 

 

displayed.

 

 

 

• 4x zoom is not available on some discs.

 

INFORMATION

 

• Zoom function is also available during pause mode.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

31

EN

OPERATING DVD

5Search Functions

 

Chapter / Title / Track Search

Time Search

You can select chapters, titles or tracks on the disc.

1During playback, press [MODE] repeatedly until ““ / ““ appears.

If you want to perform the title search, use [Cursor K/ L] repeatedly until ““ appears.

e.g.) DVD

_ _ /12 (SEARCH)

You can select the desired time which the disc is played back from.

1During playback, press[MODE] repeatedly until “/ “ appears.

e.g.) DVD

_ _ /12 (SEARCH)

2 Use[Cursor K/ L] repeatedly until ““ appears.

2Use [the Number buttons] to select your desired chapter, title or track within 60 seconds.

_ _ /12 (SEARCH)

3Playback will start automatically from the chapter, title or track you selected.

How to input the chapter, title or track number by using [the Number buttons].

total number of

less than 10

more than 10

contents on the disc

 

 

 

 

 

e.g.) track 9

[9]

[0] , [9]

 

 

 

e.g.) track 26

 

[2] , [6]

 

 

 

Note:

Track search is not available for programmed or random playback.

Depending on the DVD, this function can also be performed by directly entering the desired chapter or title number with [the Number buttons]. Refer to the manual accompanying the disc.

or

TOTAL 1:29:00

3Use [the Number buttons] to select your desired time lapse within 60 seconds.

TOTAL 1:29:00

4Playback will start automatically from the time you selected.

Note:

When there is no need to enter a number, “0” appears automatically. For example, “0: 0_ : _ _” appears in time search menu if the total time of the title or track is less than 10 minutes.

Press [CLEAR] to erase the incorrect input at step 3.

Time search can only be performed during playback (CD, DVD) or when the unit has kept the resume information (DVD).

It cannot be performed in the stop mode.

32

EN

5Repeat Playback

You can repeat playback chapters, titles or tracks on a disc.

1During playback, press [MODE] repeatedly until ““ appears.

OFF (REPEAT)

2 Use[Cursor K/ L] to change the repeat mode.

DVD

 

 

 

 

 

OFF

(repeat off)

 

 

 

 

 

 

 

CHAPTER

(current chapterrepeat)

 

 

 

 

 

 

 

 

 

 

 

 

TITLE

(current titlerepeat)

 

 

 

 

 

 

 

 

 

 

CD

 

 

 

 

 

OFF

(repeat off)

 

 

 

 

 

 

 

 

TRACK

(current trackrepeat)

 

 

 

 

 

 

 

 

 

 

 

 

ALL

(entire discrepeat)

 

 

 

 

 

 

 

 

 

 

 

 

3 Press[RETURN ] to exit.

5Repeat A-B Playback

You can repeat playback between A and B on a disc.

1During playback, press [MODE] repeatedly until “A B ” appears.

2 Press[ENTER] at your desired starting point (A).

A B A-(A-BREPEAT)

3 Press[ENTER] at your desired ending point (B).

A B A-B(A-BREPEAT)

Point B should be in the same title or track as point A.

Within a few seconds, the section A-Bwill begin to play back repeatedly.

4To cancel repeat A-Bplayback, press[MODE] repeatedly until “A B “ appears.

Press [ENTER] so “OFF” appears.

 

 

 

 

 

 

 

 

INTRODUCTION

 

• Repeat setting (except “ALL“) will be cleared when moving to

 

 

Note:

 

 

 

 

 

 

another title, chapter or track.

 

 

 

 

 

 

• During programmed playback, repeat setting will be effective

 

 

 

 

for the tracks in the program.

 

 

 

 

 

 

 

 

 

 

 

• Repeat playback or repeat A-Bplayback may not available

 

PREPARATION

 

with some discs.

 

 

 

 

 

 

 

 

 

 

 

• Repeat A-Bplayback does not function during other repeat

 

 

 

mode.

 

 

 

 

 

 

• To cancel point A, press [CLEAR] at step 2 in “RepeatA-B

 

 

 

Playback“.

 

 

 

 

 

 

• Stopping playback will cancel repeat A-Bplayback.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

5Random Playback

 

 

 

 

INITIAL

 

 

 

 

SETTING

 

CD

 

 

 

 

 

 

 

 

 

 

This function shuffles the playing order of tracks instead of playback in the

 

sequence.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

WATCHING

1 In stop mode, press[MODE] repeatedly until

 

“RANDOM” menu appears.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

TV

 

 

 

 

 

 

 

 

 

 

 

 

RANDOM

 

 

 

 

 

 

 

 

CD-DA

TOTAL 0:45:55

 

 

 

 

 

 

 

 

 

RANDOM PROGRAM

 

 

 

 

 

 

 

 

 

 

 

 

 

 

--noindication--

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

PLAY

 

 

 

 

 

OPTIONAL

 

 

 

 

 

 

 

 

 

SETTING

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

2 Press[PLAY B] to start random playback.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

OPERATING

 

Note:

 

 

 

 

 

• To repeat the current track in the random mode, follow the steps

 

 

 

1 and 2 in “Repeat Playback“ on page 33 and select “TRACK“.

 

 

 

• To repeat the entire random selections, follow the steps 1 and

 

DVD

 

2 in “Repeat Playback“ on page 33 and select “ALL“.

 

 

 

 

 

• Random playback will be kept until you press [STOP C].

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

SETTING DVD

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

TROUBLESHOOTING

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

INFORMATION

 

 

 

 

 

 

 

 

 

 

33

EN

OPERATING DVD

5Programmed Playback

CD

You may determine the order in which tracks will be played back.

1In stop mode, press [MODE] repeatedly until the “PROGRAM” menu appears.

PROGRAM

 

 

 

 

 

 

CD-DA

 

 

TOTAL

0:00:00

 

T

1

3:31

 

 

 

 

T

2

4:28

 

 

 

 

T

3

4:19

 

 

 

 

T

4

3:58

 

 

 

 

T

5

4:12

 

 

 

 

T

6

4:02

 

 

 

ENTER

T

7

3:55

 

1/

1

PLAY

 

 

1/

3

CLEAR

T 1 3:31

 

 

 

2Use [Cursor K/ L] to select a desired track, then press[ENTER] to store.

Additional tracks may be on other screens. Use [Cursor K/ L] to go on to the next/previous pages.

Repeat this step until you have selected all the tracks you wish to play back in the program.

or

PROGRAM

 

 

 

 

 

 

CD-DA

 

 

TOTAL

0:08:22

 

T 15

3:18

 

T

4

3:58

 

T 16

4:24

 

T 16

4:24

 

ALL CLEAR

 

 

 

 

ENTER

 

3/

3

 

1/

1

PLAY

 

 

T 16 4:24

 

 

 

 

CLEAR

 

 

 

 

Up to 99 tracks can be ordered.

If 8 or more tracks were in a program, use [SKIP H/ G] to see all the tracks.

3Press [PLAY B] to start programmed playback.

Note:

Press [CLEAR] to erase the last track in the program if you make an error.

To erase all programmed tracks at once, select “ALL CLEAR’’ and press [ENTER] at step 2.

While a program is being played back, [STOP C] works as follows:

-Pressing [STOP C] once: The track will be in the resume standby mode. Next time you press[PLAY B], the playback will resume from the point where it is stopped in the programmed playback.

-Pressing [STOP C] twice: Resume mode will be canceled. Next time you press[PLAY B], playback will restart from the first track in the original order. However, your programmed playback can be restarted when you follow the above steps. (Your programs are still stored until either the disc is ejected or the unit is turned off.)

-On some discs, [STOP C] will not work while the resume message appears. Please wait until the message disappears.

To repeat the current track in the program, follow the steps 1 and 2 in “Repeat Playback“ on page 33 and select “TRACK“.

To repeat the entire program, follow the steps 1 and 2 in “Repeat Playback“ on page 33 and select “ALL“.

Turning off the unit or ejecting the disc will erase the program.

You cannot use [the Number buttons] to select another track during programmed playback. Use[SKIP j/ i] to select other tracks in the program.

You cannot combine random playback with programmed playback.

You cannot alter a programmed order during playback.

34

EN

5On-screen Display

 

CD

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

You can check the information about the current disc by pressing [DISPLAY

] on

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

the remote control.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

DVD

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

current playback status

 

 

 

 

 

 

 

 

 

appears only when multi-

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

1

 

 

4/12 0:03:21 - 0:02:15

T

 

 

 

 

 

 

 

 

 

 

 

 

 

 

angle is available on the DVD

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

remaining time of the current

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

current playback status

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

track

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

elapsed time of the current track

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

1

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

11/16 0:00:00 - 0:03:30

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

remaining time of the current

 

 

 

TR (track):

 

 

chapter

 

 

 

 

 

 

 

 

current track number /

 

 

elapsed time of the current

 

 

 

 

 

 

 

 

total tracks

 

 

chapter

 

 

 

ALL:

 

 

CH (chapter):

 

 

 

 

 

 

 

 

current track number /

 

 

current chapter number /

 

 

 

 

 

 

 

 

total tracks

 

 

total chapters

2

4/12

0:13:45 - 0:45:40

 

 

T

 

 

 

 

 

 

 

 

 

 

 

 

current repeat setting

2

 

 

 

 

 

appears only when the

1/3

0:00:00 - 1:23:45

 

 

 

repeat setting is active

 

 

remaining time of the current title

 

 

 

 

T : Track repeat

 

 

 

 

 

 

 

A : All tracks repeat

 

 

elapsed time of the current title

 

 

 

A

B : A-Brepeat

 

 

 

 

 

remaining time of the entire disc

 

 

TT (title):

 

 

 

elapsed time of the entire disc

 

 

current title number / total titles

 

 

 

 

 

 

 

 

 

 

3

T

L1

 

 

layer number appears only when playing back a 2-layereddisc

L0 : Layer 0 is playing back

L1 : Layer 1 is playing back

current repeat setting appears only when the repeat setting is active

C : Chapter repeat

T : Title repeat A B :A-Brepeat

bit rate indication for the amount of audio and video data currently being read

3

Note:

When you are playing back a disc in program or random mode, “PROGRAM” (or “RANDOM”) will be displayed instead of 2 .

4

SETTING DVD DVD OPERATING SETTING OPTIONAL TV WATCHING SETTING INITIAL PREPARATION INTRODUCTION

INFORMATION TROUBLESHOOTING

35

EN

OPERATING DVD

5Special Settings

Subtitle Language

DVD

This unit allows you to select a subtitle language (if available) during DVD playback.

1During playback, press [MODE] repeatedly until ““ appears.

2Use [Cursor K/ L] repeatedly until your desired language appears.

1.ENG/6 (SUBTITLE)

or

subtitles can be varied on the displayed number.

current subtitle language.

Each time you press [Cursor K/ L], the subtitle language changes as example below.

OFF (no subtitles)

ENG (English subtitles)

FRE (French subtitles)

...

3 Press[RETURN ] to exit.

Note:

To cancel the subtitle, select “OFF” at step 2.

If your language is not shown after pressing [Cursor K / L] several times, the disc may not have that language. However, some discs only allow you to change subtitle languages setting in the disc menu. (Operation varies depending on the disc, so refer to the manual accompanying the disc.)

When “NOT AVAILABLE” appears on the TV screen, it means no subtitle is recorded on the scene.

If you choose a language that has 3-letterabbreviation, the abbreviation will be displayed every time you change the subtitle language setting. If you choose any other languages,“---”will be displayed instead. (Refer to page 43.)

Ejecting the disc will cancel your subtitle setting.

Audio Language

DVD

This unit allows you to select an audio language (if multiple languages are available) during DVD playback.

During playback, press [AUDIO] repeatedly until the desired language appears.

1.ENG Dolby D 3/2.1ch 48k/3

audio can be varied on the displayed number. current audio language.

Each time you press [AUDIO], the audio language changes as example below.

ENG (English audio)

SPA (Spanish audio)

FRE (French audio)

...

Note:

Some discs will only allow you to change the audio setting from the disc menu. Refer to the manual accompanying the discs for details.

• If your language is not shown after pressing [AUDIO] several times, the disc may not have that language. However, some discs allow you to change multiple audio languages setting in the disc menu. (Operation varies depending on the disc, so refer to the manual accompanying the disc.)

When “NOT AVAILABLE“ appears on the TV screen, it means audio language is not available.

Camera Angles

DVD

Some DVD may contain scenes which have been shot simultaneously from various angles. You can change the camera angle if “” appears on the TV screen. If “ANGLE ICON” is set to “OFF” in “OTHERS” menu, “” will not appear.

(Refer to page 42.)

1During playback, press [MODE] repeatedly until ““ appears.

2Use [Cursor K/ L] repeatedly until your desired camera angle appears.

1 / 8 (ANGLE)

or

angles can be varied on the displayed number.

3 Press[RETURN ] to exit.

36

EN

Black Level Setting

DVD

Adjust the black level to make the dark areas of the TV picture brighter.

1During playback, press [MODE] repeatedly until ““ appears.

OFF (BLACK LEVEL)

2 Use[Cursor K/ L] to adjust the black level.

or

ON (BLACK LEVEL)

 

ON : Makes the dark areas brighter.

OFF : Shows the original picture as recorded.

3 Press[RETURN ] to exit.

Note:

• The setting will be kept even if the unit is turned off.

Stereo Sound Mode

CD

This unit allows you to select a sound mode during audio CD playback.

During playback, press [AUDIO ] repeatedly until the desired sound mode appears.

STEREO

Each time you press [AUDIO ], the sound mode changes as example below.

STEREO (stereo sound with left and right channels)

L-ch (left channel sound only)

R-ch (right channel sound only)

INTRODUCTION

Virtual Surround

You can enjoy virtual surround on your existing 2 channel stereo system.

 

 

 

 

 

 

 

 

 

 

PREPARATION

1 During playback, press[MODE] repeatedly until

 

 

“ appears.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

OFF (SURROUND)

 

 

 

 

 

 

 

 

 

 

 

 

 

INITIAL

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

SETTING

2 Use[Cursor K/ L] to select the sound level.

 

 

 

 

 

or

 

 

 

 

 

 

 

 

 

 

 

 

1 (SURROUND)

 

 

 

1

 

 

 

 

 

 

 

WATCHING

 

 

 

 

 

 

 

 

: Natural effect

 

 

 

 

 

 

 

 

 

 

2

 

: Emphasized effect

 

 

 

 

TV

 

OFF : No effects (original sound)

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

3 Press[RETURN ] to exit.

 

 

 

 

 

 

 

 

 

OPTIONAL

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

SETTING

 

 

Note:

 

 

 

 

 

 

 

 

 

 

 

 

 

• The setting will be kept even if the unit is turned off.

 

 

 

 

• For audio CD, virtual surround will not be effective if the

 

 

 

 

 

 

sound mode is set to something other than “STEREO”.

 

DVDOPERATING

 

 

 

(Refer to “Stereo Sound Mode” on page 37.)

 

 

 

• Turn down the level or select “OFF” if the sound is distorted.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

SETTING DVD

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

TROUBLESHOOTING

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

INFORMATION

 

 

 

 

 

 

 

 

 

 

 

37

EN

OPERATING DVD

Marker Setup

This feature allows you to assign a specific point on a disc to be called back later.

To set a marker

1During playback, press [MODE] repeatedly until “”/“” appears.

e.g.) DVD

_ _ /12 (SEARCH)

2Use [Cursor K/L] repeatedly until marker search menu appears.

To return to the marker later

1Repeat steps 1 to 2 in “To set a marker”. Use [Cursor s/ B] to select the desired marker.

e.g.) DVD

or

2Press [ENTER] at the desired marker to start playback from the specific point which you set.

or

3Use [Cursor s/ B] to select an available marker within 60 seconds.

or

4When the playback reaches the point at which you want to set a marker, press [ENTER].

• Marker is now set.

Note:

Marker Search menu will disappear in about 60 seconds when there is no input.

You can mark up to 10 points.

To clear a marker, select the marker to be cleared, and then press [CLEAR].

Ejecting the disc or turning off the power will erase all markers.

Selecting “” at step 3 in the section “To set a marker” will also erase all markers.

5 Press[RETURN ] to exit.

38

EN

DVD SETTING

Settings are only effective when the unit is in DVD mode and any discs should not be played back.

5DVD Language Setting

You can change the desired language when playing back the disc.

1 In stop mode, press[SETUP] to display “TV SETUP”.

 

5 Use[Cursor K/L] to select the desired item, then press

 

 

 

 

[ENTER].

 

 

 

 

---TV SETUP

---

AUDIO *1, *2

(Default: ORIGINAL)

 

LANGUAGE

[ENGLISH]

 

Select the desired audio language.

 

 

 

BACK LIGHT

[BRIGHT]

 

 

 

COLOR TEMP.

[NORMAL]

 

 

 

 

 

DVD SETUP

 

 

 

 

 

 

 

 

or

SETUP

LANGUAGE

 

 

 

AUDIO

 

 

 

 

 

 

ORIGINAL

 

 

 

 

 

 

ENGLISH

 

 

2 Use[Cursor K/L] to select “DVD SETUP”, then press[ENTER].

 

FRENCH

 

 

 

GERMAN

 

 

 

 

 

 

SPANISH

 

 

 

 

 

 

ITALIAN

 

 

 

 

 

 

SWEDISH

 

 

or

 

 

 

SELECT:K/L

SET:ENTER

---TV SETUP

---

 

EXIT:SETUP

CANCEL:RETURN

 

 

 

 

LANGUAGE

[ENGLISH]

 

 

BACK LIGHT

[BRIGHT]

SUBTITLE *1, *2

(Default: OFF)

COLOR TEMP.

[NORMAL]

Select the desired subtitle language.

DVD SETUP

 

 

 

or

SETUP

LANGUAGE

3

 

SUBTITLE

 

 

Use [Cursor K/L] to select “LANGUAGE”, then press[ENTER].

 

OFF

 

 

 

ENGLISH

 

 

 

 

FRENCH

 

 

 

 

 

SPANISH

 

 

 

SETUP

 

GERMAN

 

 

 

 

ITALIAN

 

 

 

or

 

SWEDISH

 

 

 

 

 

 

LANGUAGE

 

SELECT:K/L

SET:ENTER

 

AUDIO

 

 

EXIT:SETUP

CANCEL:RETURN

 

PARENTAL

 

 

 

 

OTHERS

INITIALIZE

 

DISC MENU *1

(Default: ENGLISH)

 

 

 

 

Select the desired language in DVD menu.

SELECT:K/L

SET:ENTER

EXIT:SETUP

CANCEL:RETURN

 

 

4 Use[Cursor K/L] to select the desired item, then press

 

or

SETUP

LANGUAGE

 

DISC MENU

 

 

[ENTER].

 

 

 

 

FRENCH

 

 

 

 

 

 

 

ENGLISH

 

 

 

 

 

 

 

SPANISH

 

 

 

 

 

 

 

GERMAN

 

 

SETUP

LANGUAGE

 

 

ITALIAN

 

 

or

 

 

 

 

SWEDISH

 

 

 

ORIGINAL

 

 

DUTCH

 

 

AUDIO

 

 

 

SELECT:K/L

SET:ENTER

SUBTITLE

OFF

 

 

 

 

EXIT:SETUP

CANCEL:RETURN

DISC MENU

ENGLISH

 

 

 

 

 

 

SELECT:K/L

SET:ENTER

6

Press [SETUP] to exit.

 

 

 

 

EXIT:SETUP

CANCEL:RETURN

 

 

 

 

Note:

• To change the on-screenlanguage, display “TV SETUP” menu by pressing[SETUP] once and set the desired language. (Refer to “Language Selection“ on page 14.)

*1

• Language options are not available with some discs.

• If “OTHER” is selected in “AUDIO”, “SUBTITLE” or “DISC MENU” menu, press 4-digitnumber to enter the code for the desired language. (Refer to “Language Code List” on page 43.)

• Only the languages supported by the disc can be selected.

*2

• Use [MODE] to select subtitles available on the DVD.

• Use [AUDIO] to select audio available on the DVD.

• If the DVD’s default settings for audio and subtitle are the same language, the subtitles may not show unless you turn them on.

INFORMATION TROUBLESHOOTING SETTING DVD DVD OPERATING SETTING OPTIONAL TV WATCHING SETTING INITIAL PREPARATION INTRODUCTION

39

EN

DVD SETTING

5DVD Audio Setting

DOWN SAMPLING

(Default: ON)

Choose the appropriate audio settings for your device. It only affects during the playback of DVD.

Set “DOWN SAMPLING”.

This function is available only on digital outputting of a disc recorded in 96kHz.

1In stop mode, press [SETUP] to display “TV SETUP”.

---TV SETUP ---

 

LANGUAGE

[ENGLISH]

 

BACK LIGHT

[BRIGHT]

 

COLOR TEMP.

[NORMAL]

 

DVD SETUP

 

 

 

2Use [Cursor K/L] to select “DVD SETUP”, then press

[ENTER].

or

---TV SETUP

---

 

 

LANGUAGE

[ENGLISH]

 

 

BACK LIGHT

[BRIGHT]

 

 

COLOR TEMP.

[NORMAL]

 

 

DVD SETUP

 

 

 

 

 

 

 

 

 

 

3Use [Cursor K/L] to select “AUDIO”, then press

[ENTER].

SETUP

or

LANGUAGE AUDIO

PARENTAL

OTHERS

INITIALIZE

SELECT:K/L SET:ENTER

EXIT:SETUP CANCEL:RETURN

 

 

 

 

 

 

 

or

SETUP

 

AUDIO

 

 

 

 

 

 

 

 

 

DRC

 

 

ON

 

 

 

 

 

 

 

 

DOWN SAMPLING

ON

 

 

 

DOLBY DIGITAL

BITSTREAM

 

 

 

 

 

 

 

 

 

 

 

SELECT:K/L

SET:ENTER

 

 

 

EXIT:SETUP

CANCEL:RETURN

 

 

 

 

 

 

 

ON : When outputting in 48kHz.

OFF : When outputting the original sound.

DOLBY DIGITAL

(Default: BITSTREAM)

Set “BITSTREAM“ when this unit is connected to a Dolby Digital decoder.

 

 

 

 

 

 

 

or

SETUP

 

AUDIO

 

 

 

 

 

 

 

 

 

DRC

 

 

ON

 

 

 

 

 

 

 

 

DOWN SAMPLING

ON

 

 

 

DOLBY DIGITAL

BITSTREAM

 

 

 

 

 

 

 

 

 

 

 

SELECT:K/L

SET:ENTER

 

 

 

EXIT:SETUP

CANCEL:RETURN

 

 

 

 

 

 

 

BITSTREAM : Outputs Dolby Digital signals.

PCM : Converts the Dolby Digital into PCM. (2 channel)

5 Press[SETUP] to exit.

4Use [Cursor K/L] to select the desired item, then press[ENTER] repeatedly to change the setting.

DRC (dynamic range control)

(Default: ON)

Set “DRC”.

 

This function is available only on the discs which are recorded in the Dolby Digital format.

 

 

 

 

 

 

 

or

SETUP

 

AUDIO

 

 

 

 

 

 

 

 

 

DRC

 

 

ON

 

 

 

 

 

 

 

 

DOWN SAMPLING

ON

 

 

 

DOLBY DIGITAL

BITSTREAM

 

 

 

 

 

 

 

 

 

 

 

SELECT:K/L

SET:ENTER

 

 

 

EXIT:SETUP

CANCEL:RETURN

 

 

 

 

 

 

 

ON : Compresses the range between soft and loud sounds.

OFF : No effects (original sound).

Note:

When playing back a 96 kHz disc with the copyright protection or when virtual surround is set to 1 or 2, the sound will be down sampled at 48 kHz even if “DOWN SAMPLING” is set to “OFF”. (Refer to “Virtual Surround” on page 37.)

40

EN