Emerson LD195EM8 2, LD195EM8 7 User Manual

Size:
14.38 Mb
Download

5Picture Adjustment

You can adjust brightness, contrast, color, tint and sharpness.

1 Press[PICTURE] to adjust the picture quality.

2Use [Cursor K/ L] to select the picture quality type you want to adjust.

 

BRIGHTNESS

 

CONTRAST

or

COLOR

TINT

SHARPNESS

3Use [Cursor s/ B] to adjust the quality.

or

 

Cursor s

Cursor B

BRIGHTNESS

to decrease brightness

to increase brightness

CONTRAST

to decrease contrast

to increase contrast

 

 

 

COLOR

to decrease color

to brighten color

 

 

 

TINT

to add red

to add green

 

 

 

SHARPNESS

to make soft

to make clear

 

 

 

4 Press[RETURN ] to exit.

Note:

The picture adjustment setting display will automatically disappear in a few seconds.

In PC mode, you can select only “BRIGHTNESS“ or “CONTRAST“.

5Closed Caption

 

INTRODUCTION

 

 

TV

 

 

You can view closed captioning (cc) for TV programs, movies and news.

 

Closed caption refer to text of dialogue or descriptions displayed on-screen

 

for the hearing impaired.

 

PREPARATION

1 Press[SETUP] to display the main menu.

 

2 Use[Cursor K/ L] to select “CAPTION”, then press

INITIAL

[ENTER] repeatedly to change the setting.

SETTING

e.g.) digital TV mode

- TV SETUP

-

 

CHANNEL SETUP

 

V-CHIPSETUP

 

LANGUAGE

[ENGLISH]

 

CAPTION

[OFF]

WATCHING

or

[BRIGHT]

BACK LIGHT

 

COLOR TEMP.

[NORMAL]

 

DTVCC

 

 

 

 

TV

OFF

 

CAPTION1 - 4

OPTIONAL

TEXT1 - 4

SETTING

Caption Mode

 

 

 

CAPTION1 and TEXT1;

 

 

are the primary caption and text services.

 

The captioning or text is displayed in the same

OPERATING

language as the program’s dialogue

 

(up to 4 lines of script on the TV screen, where it does

 

not obstruct relevant parts of the picture).

DVD

CAPTION3 and TEXT3;

 

serve as the preferred data channels.

 

The captioning or text is often a secondary language.

 

CAPTION2, CAPTION4, TEXT2 and TEXT4;

DVD

are rarely available and broadcasters use them

 

only in special conditions, such as when “CAPTION1”

SETTING

and “CAPTION3” or “TEXT1” and “TEXT3” are not

 

available.

 

 

• There are 3 display modes according to programs:

 

Paint-on mode: Displays input characters on the TV

TROUBLESHOOTING

screen immediately.

 

Pop-on mode: Once characters are stored in

 

memory, they are displayed all at

 

once.

 

 

Roll-up mode: Displays the characters continuously

 

by scrolling (max. 4 lines).

 

 

 

INFORMATION

21

EN

OPTIONAL SETTING

5DTV Closed Caption

DTV

In addition to the basic closed caption described on page 21, DTV has its own closed caption called DTVCC. Use this menu to change the settings for DTVCC.

3 Press[SETUP] to exit.

 

1 Press[SETUP] to display the main menu.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Note:

To show the closed caption on your TV screen, broadcast signal must contain the closed caption data.

Not all TV programs and commercials have the closed caption or all types of the closed caption.

Captions and texts may not match the TV voice exactly.

Changing channels may delay the closed caption for a few seconds.

Adjusting or muting the volume may delay the closed caption for a few seconds.

Abbreviations, symbols and other grammatical shortcuts may be used in order to keep pace with the on-screenaction. This is not a problem with the unit.

The caption or text characters will not be displayed while the main menu or functions display is shown.

If a black box appears on the TV screen, this means that the closed caption is set to the text mode. To clear the box, select “CAPTION1”, “CAPTION2”, “CAPTION3”, “CAPTION4” or “OFF”.

If the unit receives poor quality television signals, the captions may contain errors, or there might be no captions at all. Some possible causes of poor quality signals are:

-Automobile ignition noise

-Electric motor noise

-Weak signal reception

-Multiplex signal reception (ghosts or screen flutter)

The unit retains the closed caption setting if the power fails.

When the unit receives a special effects playback signal (I.e.,Search, Slow and Still) from a VCR’s video output channel (CH3 or CH4), the unit may not display the correct caption or text.

2Use [Cursor K/ L] to select “DTVCC“, then press

[ENTER].

e.g.) digital TV mode

 

- TV SETUP

-

or

CHANNEL SETUP

V-CHIPSETUP

 

LANGUAGE

[ENGLISH]

 

CAPTION

[OFF]

 

BACK LIGHT

[BRIGHT]

 

COLOR TEMP.

[NORMAL]

 

DTVCC

 

 

 

 

3Use [Cursor K/ L] to select “CAPTION SERVICE“, then press[ENTER] repeatedly to change the setting.

 

- DTVCC -

 

or

CAPTION SERVICE

[OFF]

USER SETTING

[OFF]

 

CAPTION SIZE

[SMALL]

 

FONT STYLE

[STYLE1/8]

 

CHARACTER EDGE

[NONE]

 

FORE OPACITY

[SOLID]

 

FORE COLOR

[WHITE]

 

BACK OPACITY

[SOLID]

 

BACK COLOR

[BLACK]

OFF

Select if you do not want

DTVCC. This is the default.

Select one of these before CAPTION SERVICE changing any other item in

SERVICE1 - 6 “CAPTION” menu. Choose “SERVICE1/6” under normal circumstances.

4 Press[SETUP] to exit.

Note:

• “CAPTION SERVICE” that you can switch differs depending on the broadcast description.

22

EN

5DTVCC Style

DTV

You can change the DTVCC style such as font, color or size, etc.

1 Press[SETUP] to display the main menu.

2Use [Cursor K/ L] to select “DTVCC“, then press[ENTER].

e.g.) digital TV mode

 

- TV SETUP

-

or

CHANNEL SETUP

V-CHIPSETUP

 

LANGUAGE

[ENGLISH]

 

CAPTION

[OFF]

 

BACK LIGHT

[BRIGHT]

 

COLOR TEMP.

[NORMAL]

 

DTVCC

 

 

 

 

3Use [Cursor K/ L] to select “USER SETTING“, then press[ENTER] repeatedly to set to “ON”.

Items in the dotted box are available only when “USER SETTING“ is “ON“.

 

- DTVCC -

 

or

CAPTION SERVICE

[SERVICE1/6]

USER SETTING

[ON]

 

CAPTION SIZE

[SMALL]

 

FONT STYLE

[STYLE1/8]

 

CHARACTER EDGE

[NONE]

 

FORE OPACITY

[SOLID]

 

FORE COLOR

[WHITE]

 

BACK OPACITY

[SOLID]

 

BACK COLOR

[BLACK]

4Use [Cursor K/ L] to select an item, then press[ENTER] repeatedly to change the setting for the item.

or

- DTVCC -

 

CAPTION SERVICE

[SERVICE1/6]

 

USER SETTING

[ON]

 

CAPTION SIZE

[SMALL]

 

FONT STYLE

[STYLE1/8]

 

CHARACTER EDGE

[NONE]

 

FORE OPACITY

[SOLID]

 

FORE COLOR

[WHITE]

 

BACK OPACITY

[SOLID]

 

BACK COLOR

[BLACK]

 

 

 

INTRODUCTION

CAPTION SIZE

 

 

PREPARATION

 

 

 

Closed captioning font size can be changed as below.

 

FONT STYLE

 

 

 

Font style of the displayed caption can be switched as

 

below.

 

 

INITIAL

CHARACTER EDGE

 

 

 

Edge type of the displayed caption can be switched

SETTING

FORE COLOR, BACK COLOR

as below.

 

 

 

Font and background color of the displayed caption

 

can be switched as below.

 

 

FORE OPACITY, BACK OPACITY

WATCHING

Text and background opacity of the displayed caption

 

can be switched as below.

 

 

CAPTION SIZE

SMALL, MIDDLE, LARGE

TV

 

 

 

 

STYLE1/8

Proportional font used in the

 

 

menu screen

 

 

 

 

 

STYLE2/8

Monospaced with serifs

OPTIONAL

 

STYLE3/8

serifs

 

 

Proportionally spaced with

SETTING

FONT STYLE

STYLE4/8

Monospaced with serifs

 

 

STYLE5/8

Proportionally spaced

 

 

without serifs

 

 

 

 

 

STYLE6/8

Casual font type

OPERATING

 

STYLE7/8

Cursive font type

 

 

 

STYLE8/8

Small capitals

 

CHARACTER EDGE

NONE, RAISED, DEPRESSED, UNIFORM,

DVD

 

SHADOW LEFT, SHADOW RIGHT

 

 

FORE OPACITY

SOLID, TRANSLUCENT, FLASH

 

FORE COLOR

WHITE, BLACK, RED, GREEN, BLUE,

 

YELLOW, MAGENTA, CYAN, TRANSPARENT

 

 

DVD

BACK OPACITY

SOLID, TRANSLUCENT, FLASH

BACK COLOR

BLACK, RED, GREEN, BLUE, YELLOW,

SETTING

 

MAGENTA, CYAN, TRANSPARENT, WHITE

 

 

 

5 Press[SETUP] to exit.

 

TROUBLESHOOTING

 

 

 

 

 

 

INFORMATION

23

EN

OPTIONAL SETTING

5Back Light Setting

You can set the desired brightness mode.

1 Press[SETUP] to display the main menu.

2Use [Cursor K/ L] to select “BACK LIGHT”,

then press [ENTER] repeatedly to change the setting.

e.g.) digital TV mode

 

- TV SETUP

-

 

CHANNEL SETUP

 

V-CHIPSETUP

 

LANGUAGE

[ENGLISH]

or

CAPTION

[OFF]

BACK LIGHT

[BRIGHT]

 

COLOR TEMP.

[NORMAL]

 

DTVCC

 

 

 

 

5Color Temperature

You can adjust color temperature of the TV screen.

1 Press[SETUP] to display the main menu.

2Use [Cursor K/ L] to select “COLOR TEMP.”,

then press [ENTER] repeatedly to change the setting.

e.g.) digital TV mode

 

- TV SETUP

-

 

CHANNEL SETUP

 

V-CHIPSETUP

 

LANGUAGE

[ENGLISH]

 

CAPTION

[OFF]

or

BACK LIGHT

[BRIGHT]

COLOR TEMP.

[NORMAL]

 

DTVCC

 

 

 

 

 

BRIGHT

 

NORMAL

 

NORMAL

 

COOL

 

DARK

 

WARM

 

 

 

 

 

3 Press[SETUP] to exit.

 

3 Press[SETUP] to exit.

24

EN

5V-chip

V-chipreads the ratings for programs, then denies access to the programs which exceed the rating level you set. With this function, you can block certain programming inappropriate for children.

1 Press[SETUP] to display the main menu.

2Use [Cursor K/ L] to select“V-CHIPSETUP“, then press[ENTER].

e.g.) digital TV mode

 

- TV SETUP

-

or

CHANNEL SETUP

V-CHIPSETUP

 

 

LANGUAGE

[ENGLISH]

 

CAPTION

[OFF]

 

BACK LIGHT

[BRIGHT]

 

COLOR TEMP.

[NORMAL]

 

DTV CC

 

 

 

 

3Use [the Number buttons]to enter the 4-digit numbers for your password.

PASSWORD

- - - -

When you have not set up your password, enter 0000.

When the password is correct, the following “V-CHIPSETUP” menu is displayed.

See the following description for setting each item.

e.g.) digital TV mode

A...“A.TV Rating”Dpage 25

 

 

 

 

 

 

- V - CHIP SETUP -

 

 

B...“B. MPAA Rating”Dpage 26

TV RATING

 

 

 

 

A

C...“C. Change Password”

MPAA RATING

 

 

 

B

 

 

 

CANADIAN ENGLISH RATING

 

 

CANADIAN FRENCH RATING

 

 

Dpage 27

 

 

DOWNLOADABLE RATING

 

C

 

CHANGE PASSWORD

 

 

 

 

 

 

 

 

 

Note:

“DOWNLOADABLE RATING“ will be available when the unit receives a digital broadcast using the new rating system.

When you select a rating and set it to “BLOCK”, the higher ratings will be blocked automatically. The lower ratings will be available for viewing.

When you set the highest rating to “VIEW”, all ratings turn to “VIEW” automatically.

If the “PROTECTED PROGRAM” message appears during your TV viewing, change to a channel that is not blocked. Then, you can access “V-CHIPSETUP” menu and change the setting to allow all TV viewing.

To block any inappropriate programming, set your limits in both “TV RATING” and “MPAA RATING”.

The V-chipsetting will be retained after a power failure (except the access code reverts to 0000).

The Canadian rating systems on this unit are based on CEA-766-Aand the CanadianRatio-Televisionand Telecommunications Commission (CRTC) policy.

 

 

A. TV Rating

 

 

 

 

INTRODUCTION

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

PREPARATION

4 Use[Cursor K/ L] to select “TV RATING”, then press

 

[ENTER].

 

 

 

 

 

 

 

 

 

 

 

 

e.g.) digital TV mode

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

- V - CHIP SETUP -

 

 

 

 

 

 

or

 

TV RATING

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

MPAA RATING

 

 

 

 

 

 

INITIAL

 

 

 

CANADIAN ENGLISH RATING

 

 

 

 

 

 

 

CANADIAN FRENCH RATING

 

 

 

 

 

 

 

 

DOWNLOADABLE RATING

 

 

 

 

 

 

 

 

CHANGE PASSWORD

 

 

 

 

SETTING

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

5 Use[Cursor K/ L] to select the desired rating, then

 

 

 

press [ENTER] repeatedly to switch between “VIEW”

TVWATCHING

 

or

 

TV-Y

 

[VIEW]

 

 

 

 

 

and “BLOCK”.

 

 

 

 

 

 

 

 

 

 

 

TV-Y7(

)

[VIEW]

 

 

 

 

 

 

 

 

TV-G

 

[VIEW]

 

 

 

 

 

 

 

 

TV-PG(

)

[VIEW]

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

TV-14(

)

[VIEW]

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

TV-MA(

)

[VIEW]

 

 

 

 

OPTIONAL

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

SETTING

 

Rating

 

Category

 

 

 

 

 

 

 

 

 

 

 

 

TV-Y

Appropriate for all children

 

lower

 

 

 

 

TV-Y7

Appropriate for all children 7 and

 

 

 

 

 

 

 

older

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

OPERATING

 

 

 

 

 

 

 

 

 

 

 

 

TV-G

General audience

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

TV-PG

Parental guidance suggested

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

TV-14

Unsuitable for children under 14

 

 

 

 

 

DVD

 

 

 

 

 

 

 

 

 

 

 

 

TV-MA

Mature audience only

 

 

 

higher

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

SETTING DVD

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

TROUBLESHOOTING

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

INFORMATION

 

 

 

 

 

 

 

 

 

 

 

 

25

EN

OPTIONAL SETTING

B. MPAA Rating

To Set the Sub Ratings

As for TV-Y7,TV-PG,TV-14orTV-MA,you can further set the sub ratings to block specific elements of programming. To set the sub ratings, follow the steps below.

1Use [Cursor K/ L] to select the desired main rating, then press[ENTER] twice to show its sub ratings.

or

TV-Y

[VIEW]

 

 

TV-Y7(DLSV) [VIEW]

 

 

TV-G

[VIEW]

 

 

TV-PG(DLSV)

[BLOCK]

 

 

TV-14(DLSV) [BLOCK]

 

 

TV-MA(DLSV)

[BLOCK]

 

 

 

 

 

 

 

 

 

2 Use[Cursor K/ L], then press[ENTER] repeatedly to change the setting.

e.g.) TV-PG

 

TV-PG

[BLOCK]

or

D

[BLOCK]

L

[BLOCK]

 

S

[BLOCK]

 

V

[BLOCK]

 

 

 

Sub Rating

Category

Rating

FV

Fantasy Violence

TV-Y7

D

Suggestive Dialogue

TV-PG,TV-14

L

Coarse Language

TV-PG

S

Sexual Situation

TV-14

V

Violence

TV-MA

 

6 Press[SETUP] to exit.

MPAA Rating is the rating system created by MPAA (Motion Picture Association of America).

4Use [Cursor K/ L] to select “MPAA RATING”, then press[ENTER].

e.g.) digital TV mode

- V - CHIP SETUP -

TV RATING

MPAA RATING

or CANADIAN ENGLISH RATING CANADIAN FRENCH RATING DOWNLOADABLE RATING CHANGE PASSWORD

5Use [Cursor K/ L], then press[ENTER] repeatedly to change the setting.

or

G

[VIEW]

PG

[VIEW]

 

PG-13

[VIEW]

 

R

[BLOCK]

 

NC-17

[BLOCK]

 

X

[BLOCK]

 

 

 

Rating

Category

GGeneral audience

PG

Parental guidance suggested

PG-13

Unsuitable for children under 13

R

Restricted; under 17 requires accompanying

parent or adult guardian

 

 

 

NC-17

No one under 17 admitted

XMature audience only

6 Press[SETUP] to exit.

Note:

Blocked sub ratings will appear beside the main rating category in “TV RATING” menu.

You cannot block a sub rating (D, L, S or V) if the main rating is set to “VIEW”.

Changing the category to “BLOCK” or “VIEW” automatically changes all its sub ratings to the same (“BLOCK” or “VIEW”).

26

EN

C. Change Password

Although the default code “0000” is supplied with the unit, you can set your own password.

4Use [Cursor K/ L] to select “CHANGE PASSWORD”, then press[ENTER].

 

e.g.) digital TV mode

 

- V - CHIP SETUP -

 

TV RATING

or

MPAA RATING

CANADIAN ENGLISH RATING

 

CANADIAN FRENCH RATING

 

DOWNLOADABLE RATING

 

CHANGE PASSWORD

 

 

5Use [the Number buttons] on the remote control to enter the new4-digitpassword.

Enter password again in “CONFIRM PASSWORD” space.

NEW PASSWORD

_ _ _ _

CONFIRM PASSWORD

_ _ _ _

6 Press[SETUP] to exit.

Note:

Make sure new password and confirm password must be exactly the same. If they are different, the space is cleared for reentering.

Your password will be erased and return to the default (0000) when a power failure occurs. If you forget the password, unplug the power cord for 10 seconds to restore the password to 0000.

INFORMATION TROUBLESHOOTING SETTING DVD DVD OPERATING SETTING OPTIONAL TV WATCHING SETTING INITIAL PREPARATION INTRODUCTION

27

EN

OPTIONAL SETTING

5PC Settings

This function lets you adjust the PC screen position, clock and phase during PC input.

1 Press[SETUP] to display the main menu.

2Use [Cursor K/ L] to select “PC SETTING”, then press[ENTER].

e.g.) PC mode

 

- TV SETUP

-

or

CHANNEL SETUP

V-CHIPSETUP

 

LANGUAGE

[ENGLISH]

 

CAPTION

[OFF]

 

BACK LIGHT

[BRIGHT]

 

COLOR TEMP.

[NORMAL]

 

PC SETTING

 

 

 

 

3Adjust the setting.

AUTO ADJUSTMENT

Use [Cursor K/L] to select “AUTO ADJUSTMENT”, then press[ENTER].

-PC SETTING -

 

AUTO ADJUSTMENT

 

 

or

HORIZONTAL POSITION

[

15]

VERTICAL POSITION

[ -15]

 

CLOCK

[

-5]

 

PHASE

[

0]

The horizontal/vertical position, clock and phase of the PC screen are automatically adjusted in a few seconds.

HORIZONTAL POSITION, VERTICAL POSITION

Use [Cursor K/L] to select an item,

then use [Cursor s/B] to adjust the PC screen position.

 

Cursor s

Cursor B

HORIZONTAL

to move PC screen left

to move PC screen right

POSITION

 

 

VERTICAL

to move PC screen down

to move PC screen up

POSITION

 

 

CLOCK, PHASE

Use [Cursor K/L] to select an item,

then use [Cursor s/B] to adjust the “CLOCK” setting to stabilize the PC screen and the “Phase” setting to improve the clarity of the PC screen.

 

 

 

Cursor s

Cursor B

CLOCK

to decrease setting value

to increase setting value

PHASE

 

 

 

 

 

 

 

 

4 Press[SETUP] to exit.

 

 

 

 

 

 

 

 

 

 

 

Note:

Adjust the “PHASE” setting after the “CLOCK” setting has been properly adjusted.

You may not obtain an appropriate screen with auto adjustment for some signals. In this case, adjust the settings manually.

The setting range of the horizontal/vertical position is ±30, but the limit value differs depending on PC input signal.

28

EN

OPERATING DVD

DVD Functions

5Playable Media

Media Type

DVD-VIDEO

DVD-RW

DVD-R

DVD+RW

DVD+R

CD-DA

CD-RW

CD-R

Logo

 

 

 

 

 

 

 

 

Recorded

 

digital video (MPEG2)

 

 

digital audio

 

Signal

 

 

 

 

 

 

 

 

 

 

 

 

Media Size

 

 

 

5 inches (12 cm)

 

 

 

5Unplayable Media

NEVER play back the following discs. Otherwise, malfunction may result!

3 inch (8 cm) disc, DVD-RAM,DVD-audio,CD-i,photo CD, video CD, DVD with region codes other than 1 or ALL,DTS-CD,DVD-ROMfor personal computers,CD-ROMfor personal computers, the discs with labels, scratches, stains, blemishes, etc., HD DVD,Blu-rayDisc,CD-RW/-Rwith MP3 files.

On the following disc, the sound MAY NOT be heard. super audio CD

Any other discs without compatibility indications

Note:

Unfinalized discs cannot be played back.

For DVD-RW/R,discs recorded in the VR (video recording) format cannot be played back. Only the finalized video format discs can be played back.

Some discs cannot be played back because of incompatible recording conditions, characteristics of the recorder or special properties of discs.

Only the sound recorded on the normal CD layer can be delivered. The sound recorded on the high density super audio CD layer cannot be delivered.

Do not use a single CD adaptor which makes 3 inch (8 cm) to 5 inch (12 cm) disc.

You can play back discs which bear the marks listed in “Playable Media”. If you use non-standardizeddiscs, this unit may not play them back. Even if they are played back, the sound or video quality will be compromised.

If the recorded portion of the disc is too small (less than 2-3/16inches (55 mm) across), it may not play back properly.

DVD OPERATING SETTING OPTIONAL TV WATCHING SETTING INITIAL PREPARATION INTRODUCTION

Region Codes

This unit has been designed to play back DVD with region 1. DVD must be labeled for ALL regions or for region 1 in order to play back on the unit. You cannot play back DVD that are labeled for other regions. Look for the symbols on your DVD. If these region symbols are not on your DVD, you cannot play back the DVD in this unit.

The number inside the globe refers to region of the world. A DVD labeled for a specific region can only be played back on the unit with the same region code.

Color Systems

DVD is recorded in different color systems throughout the world. The most common color system is NTSC (which is used primarily in the United States and Canada).

This unit uses NTSC, so DVD you play back must be recorded in the NTSC system. You cannot play back DVD recorded in PAL color systems.

INFORMATION TROUBLESHOOTING SETTING DVD

29

EN

OPERATING DVD

5Playback

Before you begin:

Turn on the amplifier and any other device which is connected to this unit. Make sure the external audio receiver (not included) are set to the correct input mode.

1 Press[POWER] to turn on the unit.

2 Insert the disc with label side facing forward.

label

# CAUTION

• Do not put coins or foreign objects into the disc loading slot.

In case the DVD was recorded on both sides, make sure the label side you want to play back is

facing forward.

3The unit switches to the DVD mode when the unit was in TV mode and detects the type of disc.

e.g.) DVD

DVD

• Press [PLAY B] if the unit does not go to the DVD mode.

4The disc starts playback.

If playback does not start automatically, press [PLAY B] again.

5 Press[STOP C] to stop playback temporarily.

If playback remains stopped for 20 minutes, the unit will turn itself off automatically when “AUTO POWER OFF“ is set to “ON“.

6 Press[EJECT A] to eject the disc.

Note:

” may appear at thetop-righton the TV

screen when the operation is prohibited by the disc or this unit.

Some DVD may start playback from title 2 or 3 due to specific programs.

During the playback of a 2-layereddisc, pictures may stop for a moment. This happens while the 1st layer is being switched to the 2nd layer. This is not a malfunction.

When you cannot remove the disc, you may try either following operations.

-Press and hold [EJECT A] on the unit for more than 5 seconds.

-Unplug the AC power cord and plug it in again, then press

[EJECT A].

It will take about 10 seconds to eject the disc, while that the unit will not respond to any key commands.

30

5Disc Menu

DVD

Some discs contain disc menus which describe the contents of the disc or allow you to customize disc playback, or title menu which lists the titles available on the DVD.

To display the DVD menu, press [MENU] and use[Cursor K/ L/ s/ B] to select an item, then press

[ENTER] (or [PLAYB]).

To display the top menu, press [TOP MENU] and use[Cursor K/ L/ s/ B] to select an item, then press

[ENTER] (or [PLAYB]).

Note:

Menu operations may vary depending on the disc.

Refer to the manual accompanying the disc for more details.

5Resume Playback

Press [STOP C] during playback.

 

 

 

 

Resume message will appear on

 

 

 

Resume ON

the TV screen.

 

 

Press 'PLAY' to play from here.

Press [PLAY B]. Playback will

To play the beginning,

press 'STOP' first and then 'PLAY'.

resume from the point at which

 

 

playback was stopped.

 

 

Note:

To cancel resume, press [STOP C] one more time in the stop mode. On some discs,[STOP C] will not work while the resume message appears. Please wait until the message disappears.

The resume information will be kept even when unit is turned off. However, ejecting the disc will cancel the resume feature. Playback will start at the beginning the next time you insert the disc.

5Skip

During playback, press [SKIP H/ G] repeatedly to skip chapters, titles or tracks to a desired point. Playback will start automatically from the chapter, title or track you selected.

Note:

[SKIP H / G] are not available when playback is stopped.

Chapter/title/track search can only be performed during playback or when the unit has kept the resume information. It cannot be performed in the stop mode.

Chapter/title search is not available with some DVD.

5Fast Forward / Fast Reverse

E 1

Press and hold [REV /h] or[FWD /g] repeatedly during playback to select the desired forward or reverse speed.

To continue playback, press [PLAY B].

Note:

Set “STILL MODE” to “FIELD” in “OTHERS“ menu if pictures in the fast playback mode are blurred. (Refer to page 42.)

Fast forward / fast reverse speed varies with disc. Approximate speed is 1(2x), 2(8x), 3(20x), 4(50x) and 5(100x) on DVD and 1(2x), 2(8x) and 3(30x) on audio CD.

For DVD, sound will be muted during the search.

For audio CD, sound will be intermittent during the search.

EN