Emerson LD195EM8 2, LD195EM8 7 User Manual

Size:
14.38 Mb
Download

Cables not included.

Please purchase the necessary cables at your local store.

[Video Connection]

RCA video connection offers standard picture quality for video devices connected to the unit.

Use an RCA video cable to connect the unit to external video devices equipped with video output jack.

If you connect to the unit’s video input jack, connect an RCA audio cable to the audio L/R jacks of VIDEO1. When the audio jack of the video device is monaural, connect an RCA audio cable to the audio L input jack.

e.g.)

rear of this unit

AUDIO OUT

VIDEO

L

R

OUT

camcorder

video game

COMPONENT

VIDEO 2

 

 

AUDIO

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Y

Pb

 

Pr

 

 

L

 

 

R

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

VIDEO 1

 

 

AUDIO

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

COAXIAL

S-VIDEO

VIDEO

L

 

 

R

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

STEREO

STAND-BY

RCA video cable

VCR

 

RCA audio cable

Note:

If you connect to the S-videoinput jack and the video input jack at the same time, theS-videoconnection will have priority.

[Digital Audio Output Connection (for digital broadcasting only)]

If you connect this unit to an external digital audio device, you can enjoy multi-channelaudio like 5.1ch digital broadcasting sound.

Use a digital audio coaxial cable to connect the unit to external digital audio devices. e.g.)

rear of this unit

DIGITAL AUDIO

COAXIAL IN

Dolby Digital

 

COMPONENT

VIDEO 2

 

AUDIO

Y

Pb

Pr

L

R

decoder

 

 

VIDEO 1

 

AUDIO

 

 

 

 

 

COAXIAL

S-VIDEO

VIDEO

L

R

digital audio coaxial cable

INFORMATION TROUBLESHOOTING SETTING DVD DVD OPERATING SETTING OPTIONAL TV WATCHING SETTING INITIAL PREPARATION INTRODUCTION

11

EN

PREPARATION

Cables not included.

Please purchase the necessary cables at your local store.

[PC Connection]

This unit is equipped with a PC input jack. If you connect this unit to your PC, you can use this unit as a computer monitor.

e.g.)

VGA cable should be

rear of this unit

VGA cable

with ferrite core.

 

 

 

mini-plugaudio cable

 

 

 

personal computer

 

 

 

 

The following signals can be displayed:

 

 

 

 

Format

Resolution

V. Frequency

Format

Resolution

V. Frequency

VGA

640 x 480

60Hz

WXGA

1280 x 720

60Hz

SVGA

800 x 600

60Hz

 

1280 x 768

60Hz

WVGA

848 x 480

60Hz

 

1360 x 768

60Hz

XGA

1024 x 768

60Hz

BOIS

720 x 400

70Hz

 

 

 

WXGA+

1440 x 900

60Hz

Other formats or non-standardsignals will not be displayed correctly.

 

 

Note:

Please purchase the VGA cable that has a ferrite core.

The following operations may reduce noise.

-Attach a ferrite core to the AC power cord of your PC.

-Unplug the AC power cord and use the built-inbattery of your PC.

12

EN

INITIAL SETTING

These operations are accessible by remote control. Some may also be accessible by controls on the main unit.

TV Functions

5Initial Setup

This section will guide you through the unit’s initial setting which includes selecting a language for your on-screenmenu and auto channel scan, which automatically scans and memorizes viewable channels.

Before you begin:

Make sure if the unit is connected to antenna or cables.

1After making all the necessary connections, press [POWER] to turn on the unit.

• This operation may take a few moments.

2Use [Cursor K/ L] to select theon-screenlanguage from the choices on the right side of the TV screen. (ENGLISH / ESPAÑOL / FRANÇAIS)

or

SELECT LANGUAGE

 

ENGLISH

SELECCIONE EL IDIOMA

ESPAÑOL

 

CHOISIR LA LANGUE

 

FRANÇAIS

 

SELECT : K,, L

 

SET : ENTER

 

SELECCIONE : K,, L

AJUSTE : ENTER

 

CHOIX : K,, L

VALIDER : ENTER

“INITIAL SETUP“ menu on step 3 will be displayed in the selected language after you press [ENTER].

Note:

If you connect the cable system directly, contact the CATV installer.

If you press [POWER] or[SETUP] during auto channel scan, this setting will be canceled.

The initial auto channel scan function can be executed for either TV/DTV or CATV only once. If you want to scan both TV/DTV and CATV, you need to select “CHANNEL SETUP” in the main menu to scan and memorize other channels after initial presetting is completed. (Refer to page 14.)

You can cancel or exit the initial auto channel scan menu by pressing [SETUP].

When no channel can be received by auto channel scan, “NO TV SIGNALS” is displayed on the TV screen.

If there is no signal input from the antenna terminal and no operation for several seconds after you turn on the unit, “HELPFUL HINTS” appears. Follow the instructions listed on the TV screen.

-HELPFUL HINTS -

1.PLEASE CHECK TO SEE IF THE ANTENNA / CABLE / SATELLITE IS PROPERLY CONNECTED.

2.DID YOU PERFORM “AUTO PRESET CH”?

3.PLEASE REFER TO FRONT PAGE OF THE OWNER’S MANUAL OR REAR PANEL FOR SUPPORT LINE INFORMATION.

5Main Menu

This section describes the overview of the main menu displayed when you press [SETUP]. For more details, see the reference page for each item. The main menu consists of the function setting items below.

3Use [Cursor K/ L] to select “AUTO PRESET CH(TV/DTV)” for TV channels or “AUTO PRESET CH(CATV)“ for CATV channels, then press[ENTER].

- INITIAL SETUP -

or

PLEASE CONNECT ANTENNA OR CABLE

OR SATELLITE TO THIS UNIT.

AUTO PRESET CH (TV/DTV)

AUTO PRESET CH (CATV)

Scanning and memorizing of channels start automatically.

25

AUTO PRESET CH(TV/DTV)

Press [SETUP].

e.g.) digital TV mode

 

 

- TV SETUP

-

 

 

CHANNEL SETUP

 

 

V-CHIPSETUP

 

 

LANGUAGE

[ENGLISH]

 

 

CAPTION

[OFF]

 

 

BACK LIGHT

[BRIGHT]

 

 

COLOR TEMP.

[NORMAL]

 

 

DTVCC

 

 

 

 

 

CHANNEL SETUP

You can automatically scan the viewable channels and remove the undesired channels.

(Refer to “Auto Channel Scan” on page 14.)

V-CHIPSETUP

You can set the viewing limitations. (Refer to “V-chip”on page 25.)

LANGUAGE

You can change the language (English, Spanish, French) displayed on the main menu.

(Refer to “Language Selection” on page 14.)

• When the scanning and memorizing of channels are

CAPTION

completed, the lowest memorized channel will be

You can change the display format for closed caption,

displayed.

which displays the dialogue of a TV program or other

 

information across the TV screen.

 

(Refer to “Closed Caption” on page 21.)

INFORMATION TROUBLESHOOTING SETTING DVD DVD OPERATING SETTING OPTIONAL TV WATCHING SETTING INITIAL PREPARATION INTRODUCTION

13

EN

e.g.) digital TV mode

INITIAL SETTING

BACK LIGHT

You can set the desired brightness mode. (Refer to “Back Light Setting” on page 24.)

COLOR TEMP.

You can adjust color temperature.

(Refer to “Color Temperature” on page 24.)

DTVCC

In addition to the basic closed caption described on page 21, DTV has its own closed caption called DTVCC.

(Refer to “DTV Closed Caption” on page 22.)

PC SETTING

You can adjust the position, stability and clarity of the PC screen.

This menu will appear only in PC mode, and can only be set when the unit detects the PC input signal. (Refer to “PC Settings” on page 28.)

5Auto Channel Scan

If you switch wires (e.g., between antenna and CATV) or if you move the unit to a different area after the initial setting, or if you restore the DTV channel you deleted, you will need to perform auto channel scan.

Before you begin:

Make sure if the unit is connected to antenna or cables.

1 Press[SETUP] to display the main menu.

2Use [Cursor K/ L] to select “CHANNEL SETUP”, then press[ENTER].

e.g.) digital TV mode

 

- TV SETUP

-

or

CHANNEL SETUP

V-CHIPSETUP

 

LANGUAGE

[ENGLISH]

 

CAPTION

[OFF]

 

BACK LIGHT

[BRIGHT]

 

COLOR TEMP.

[NORMAL]

 

DTVCC

 

 

 

 

• Scanning and memorizing of channels start automatically.

D25

AUTO PRESET CH(DTV)

When the scanning and memorizing are completed, the lowest memorized channel will be displayed.

When you selected “AUTO PRESET CH(TV/DTV)”, the lowest memorized analog channel will be displayed when the scanning and memorizing are completed. If there is no analog channel, the lowest memorized digital channel will be displayed.

Note:

After setting “Auto Channel Scan”, using [CH. K / L] on the remote control skips unavailable programs automatically.

If you connect the cable system directly, contact the CATV installer.

If you press [POWER] or[SETUP] during auto channel scan, the setting will be canceled.

When no channel can be received by auto channel scan, “NO TV SIGNALS” will be displayed on the TV screen.

Channel settings will be saved even if the power fails.

If you have Spanish or French menus and need English, press [SETUP]. Use[Cursor K / L] to select “IDIOMA” or “LANGAGE”. Press[ENTER] repeatedly to select “ENGLISH”. Press[SETUP] to exit the main menu.

With regard only to the digital channel, even after the scanning is completed if you unplug the AC power cord before turning off the unit by pressing [POWER], the channel setting may be lost.

5Language Selection

You can choose English, Spanish or French as your on-screenlanguage.

1 Press[SETUP] to display the main menu.

3 Use[Cursor K/ L] to select your desired preset type, then press[ENTER].

 

e.g.) digital TV mode

 

- CHANNEL SETUP -

or

ADD/DELETE(DTV)

 

AUTO PRESET CH(DTV)

 

AUTO PRESET CH(TV/DTV)

 

AUTO PRESET CH(CATV)

 

! CATV takes approx. 50min.

 

 

2Use [Cursor K/ L] to select “LANGUAGE”,

then press [ENTER] repeatedly to change the setting.

e.g.) digital TV mode

 

- TV SETUP

-

 

CHANNEL SETUP

 

V-CHIPSETUP

 

LANGUAGE

[ENGLISH]

 

CAPTION

[OFF]

 

BACK LIGHT

[BRIGHT]

or

COLOR TEMP.

[NORMAL]

DTVCC

 

 

 

 

ENGLISH

When aerial antenna is connected,

select “AUTO PRESET CH(TV)”, “AUTO PRESET CH(DTV)” or “AUTO PRESET CH(TV/DTV)”.

When connected to CATV, select “AUTO PRESET CH (CATV)”.

ESPAÑOL

FRANÇAIS

3 Press[SETUP] to exit.

14

EN

WATCHING TV

5Channel Selection

Select channels by using [CH. K /L] or [the Number buttons].

Use [CH.K /L]or [the Number buttons]to select the memorized channels.

oror

Using [the Number buttons]

TV

- When selecting analog channel 12

DTV

- When selecting digital channel 12-1

Be sure to press [–/ENT.] before entering the minor channel number.

Press [CH. RECALL ] to return to the previously viewed channel.

When you select a channel larger than 100, press

[+100] first. Then use [the Number buttons]to press the lower 2-digit numbers.

Only [the Number buttons] can be used to select thenon-memorizedchannels.

About digital TV broadcasting:

With its high definition broadcast, digital broadcasting far surpasses analog broadcasting in both its picture and sound quality.

What is the minor channel?

By using high compression technology, digital broadcasting offers a service that enables multiple signals to send simultaneously. Therefore, you can select more than one program per major channel since digital broadcasting technology distinguishes between multiple channels broadcast by a single network.

NTSC (analog mode)

[Air Time]

ATSC (digital mode)

 

 

18:00

 

 

 

 

 

 

 

 

 

 

 

 

 

 

CH4

 

No signal

 

No signal

 

 

18:30

 

 

 

 

 

 

 

CH4

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

CH4

19:00

 

 

 

(high definition TV)

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

CH4

 

CH4-1

 

No signal

 

 

19:30

 

 

 

 

 

 

 

 

 

 

 

 

20:00

 

CH4

 

No signal

 

CH4-2

 

 

 

 

 

 

 

 

 

 

 

 

 

 

20:30

 

CH4

 

CH4-1

 

CH4-2

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

major channel

 

minor channel

: change automatically

: change manually by using[CH. K/L]

Although, you cannot watch the high definition TV (HDTV) program, the unit converts the HDTV signal down to the standard definition TV signal.

Note:

“NO SIGNAL” will appear on the TV screen after the minor channel broadcast is over.

5Volume Adjustment

INTRODUCTION

 

This section describes how to adjust the volume.

The mute function, which turns the sound off and on, is also described.

 

 

 

 

 

 

 

 

 

 

 

 

 

Use [VOL. X/ Y] to adjust the audio volume.

PREPARATION

 

 

 

 

 

 

 

 

 

 

 

or

 

 

 

 

 

 

 

 

 

 

 

 

VOLUME

20

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

INITIAL

 

 

 

 

 

 

 

 

 

 

 

 

• The volume bar will be displayed at the bottom of the

 

TV screen when adjusting the volume.

 

 

 

 

SETTING

• The volume bar will automatically disappear in a few

 

seconds.

 

 

 

 

 

Press [MUTE] to turn off and on the sound.

MUTE

20

TV WATCHING

 

 

 

• “MUTE” is displayed on the TV screen.

Press [MUTE ] again or use[VOL. X/ Y] to recover

OPTIONAL

 

the original volume.

SETTING

 

5Switching Each Input Mode

OPERATING

You can easily switch with the remote control to the DTV (ATSC) and TV

(NTSC) or to access external devices when they are connected to the unit.

 

 

 

 

 

 

 

Press [INPUT] repeatedly to cycle through the input

DVD

modes.

 

 

 

ANALOG MODE

 

 

 

 

 

 

DVD

 

 

DIGITAL MODE

 

 

SETTING

 

 

VIDEO1

 

 

 

 

 

VIDEO2

 

 

 

 

 

 

 

 

 

PC

TROUBLESHOOTING

• To use the video or S-videoinput jack on the unit,

 

 

select “VIDEO1”.

 

• To use the component video input jacks on the unit,

 

 

select “VIDEO2”.

 

• To use the PC input jack on the unit, select “PC”.

 

 

 

 

 

 

 

Note:

 

 

INFORMATION

 

• When you switch the analog mode to the digital mode,

 

 

 

 

 

 

it may take a while until the digital channel selection is

 

 

 

completed. “NOW SCANNING“ is displayed while switching

 

 

 

the modes.

 

 

 

 

 

 

15

 

 

 

 

EN

 

WATCHING TV

5Switching Audio Mode

This section describes how to switch the audio in the analog mode and how to switch the audio language in the digital mode.

5Sleep Timer

The sleep timer can be set to automatically turn off the unit after an incremental period of time.

TV

While receiving an MTS broadcast, press [AUDIO] repeatedly to cycle through the available audio channel.

MAIN

SAP

MONO

MAIN : Outputsmain-audio

SAP : Outputs second audio program

MONO : Outputsmono-audio

DTV

1Press [AUDIO ] to display the currently selected language and the number of available languages.

A Day of Memories

25-03

 

 

 

 

 

KABC

 

 

 

75

TV-PG

ENGLISH 1/2

 

 

2Press [AUDIO ] repeatedly to cycle through the available audio languages.

Available languages differ depending on the broadcast. “OTHER” is displayed when the audio language cannot be acquired, or the acquired languages are other than English, Spanish or French.

Note:

Pressing [AUDIO ] does not control external audio devices.

The information display will automatically disappear in a few seconds.

1 Press[SLEEP ] to set the sleep timer.

SLEEP OFF

• Sleep timer display appears on the TV screen.

2Press [SLEEP ] repeatedly to change the amount of time until shut off.

SLEEP 120MIN.

You can set your unit to turn off after a set period of time (from 30 to 120 minutes).

Each press of [SLEEP ] will increase the time by 30 minutes.

After setup, the sleep timer display can be called up for checking by pressing [SLEEP ].

To Cancel the Sleep Timer

Press [SLEEP ] repeatedly until “SLEEP OFF“ is displayed on the TV screen.

Note:

The sleep timer display will automatically disappear in a few seconds.

When you disconnect the unit from the AC outlet or when a power failure occurs, the sleep timer setting will be canceled.

16

EN

5Screen Information

You can display the currently selected channel or other information such as the audio mode on the TV screen.

TV

In the analog mode, the current channel number is displayed.

Press [DISPLAY].

CH 25

The current channel number is displayed at the topright corner of the TV screen.

To clear the display, press [DISPLAY ] again.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

INTRODUCTION

DTV

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

In the digital mode, the detailed broadcasting information for the current

PREPARATION

channel such as program title, program guides are displayed.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Press [DISPLAY ] repeatedly to cycle through the

 

available display modes.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

OFF

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

INITIAL

 

 

 

 

 

 

 

BROADCASTING INFORMATION

 

 

 

 

 

 

 

 

 

SETTING

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

PROGRAM GUIDE

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Broadcasting Information

 

 

 

 

 

 

 

 

 

 

 

The following information is displayed.

 

 

 

 

 

 

 

 

 

 

 

1 program title

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

2 signal quality indicator

 

 

 

 

 

 

 

 

 

 

WATCHING

 

3 program rating

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

4 channel number

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

5 broadcast station

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

TV

 

6 audio language

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

(Refer to “Switching Audio Mode” on page 16.)

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

1

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

4

 

 

 

OPTIONAL

 

 

 

A Day of Memories

25-03

 

 

 

 

 

 

 

 

 

 

 

 

 

 

2

 

 

 

 

 

 

 

 

 

 

 

 

 

KABC

 

 

5

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

75

TV

-PG

ENGLISH 1/2

 

 

6

 

 

 

 

3

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

SETTING

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Program Guide

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

OPERATING

The program guide added to broadcasting information

is displayed.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

A Day of Memories

25-03

 

 

 

 

 

 

DVD

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

KABC

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

75

TV-PG

ENGLISH 1/2

 

 

 

 

 

 

 

 

 

 

 

 

 

 

A quarter-centuryago, which may now

 

 

 

 

 

 

 

 

 

 

 

program

 

qualify as the good old days of newsp-

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

apering, run-of-papersales accounted

 

 

 

 

 

 

 

 

 

 

 

guide

 

for 80 percent of the industry’s adverti-

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

sing revenues.

 

 

 

 

 

 

 

 

DVD

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

SETTING

 

Note:

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

• When the program guide consists of more than 6 lines, use

 

 

[Cursor K /L]to scroll.

 

 

 

 

 

 

 

 

 

 

 

 

• “No description provided.” is displayed when the program

 

 

guide is not provided.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

• While the program guide is displayed, the closed caption

TROUBLESHOOTING

 

function is interrupted.

 

 

 

 

 

 

 

 

 

 

 

• In external input mode, the following screen is displayed;

 

 

e.g.) When an external device is connected to VIDEO1 input

 

 

 

 

jack.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

VIDEO 1

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

The information display will automatically disappear in a few seconds when the closed caption is on.

INFORMATION

17

EN

WATCHING TV

5TV Screen Display Mode

3-5types of display modes can be selected when the unit receives 4:3 or 16:9 video signal or an external device is connected to the unit. There are 3 types of display modes according to PC input signals.

Press [SCREEN MODE ] repeatedly to switch the TV aspect ratio.

For 4:3 video signal

 

For 16:9 video signal

 

 

 

 

 

 

 

 

SIDEBAR

 

WIDE

 

 

(analog / external input mode)

 

 

 

 

 

 

FULL

MOVIE

 

 

 

 

WIDE

(digital mode)

: digital mode

: analog / external input mode

SIDEBAR

Select to display a 4:3 picture at its original size.

The black bars appear on the left and right sides of the screen.

FULL

Select to display a 4:3 picture to fill the screen.

MOVIE ¾available in the analog / external input mode only

Select to reduce the black bars on top and bottom.

WIDE

Digital mode:

Select to display a 4:3 picture to fill the screen and shrink “FULL” picture horizontally.

Analog / external input mode:

Select to display a 4:3 picture to fill the screen and stretch “FULL” picture horizontally.

FULL

EXPAND

SIDE CUT

MOVIE

ZOOM

: digital mode

: analog / external input mode

FULL

Select to display a 16:9 picture to fill the screen.

SIDE CUT

Select to display a 16:9 picture to fill the screen and stretch “FULL” picture horizontally. The left and right sides of the picture will be cropped out.

ZOOM ¾available in the analog / external input mode only

Select to enlarge a 16:9 picture without distorting the aspect ratio.

MOVIE

Select to reduce the black bars on top and bottom.

EXPAND ¾available in the analog / external input mode only

Select to reduce the black bars on the left and right sides.

Note:

You may not switch the display mode depending on the program.

18

EN

For PC input signal

Type of display

Resolution

 

640 x 480

VGA

 

800 x 600

SVGA

 

1,024 x 768

XGA

Display a vertically stretched picture without distorting the aspect ratio.

The black bars appear on the left and right sides of the screen.

 

Type of display

Resolution

 

 

 

 

 

 

 

 

848 x 480

WVGA

 

 

 

 

 

 

 

 

1,280 x 720

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

1,280 x 768

WXGA

 

 

 

 

 

 

 

 

1,360 x 768

 

 

 

 

 

 

 

 

720 x 400

BIOS

 

 

 

 

 

Display a horizontally stretched picture without distorting the aspect ratio.

The black bars appear on the top and bottom sides of the screen.

Type of display

Resolution

1,440 x 900 WXGA+

Display a picture in its original size.

Note:

• You can change the screen resolution on your PC.

INFORMATION TROUBLESHOOTING SETTING DVD DVD OPERATING SETTING OPTIONAL TV WATCHING SETTING INITIAL PREPARATION INTRODUCTION

19

EN

OPTIONAL SETTING

5Channel Add/Delete

The channel add/delete function lets you add the channel that was not added by auto channel scan due to the reception status at the initial setting. You can also delete the unnecessary channels.

1 Press[SETUP] to display the main menu.

2Use [Cursor K/ L] to select “CHANNEL SETUP”, then press[ENTER].

e.g.) digital TV mode

 

- TV SETUP

-

or

CHANNEL SETUP

V-CHIPSETUP

 

LANGUAGE

[ENGLISH]

 

CAPTION

[OFF]

 

BACK LIGHT

[BRIGHT]

 

COLOR TEMP.

[NORMAL]

 

DTVCC

 

 

 

 

3Use [Cursor K/ L] to select “ADD/DELETE(DTV)” or “ADD/DELETE”, then press[ENTER].

6 Press[SETUP] to exit.

Note:

”ADD/DELETE(DTV)” or “ADD/DELETE” menu will disappear automatically in a few seconds.

In the digital mode (DTV), you can add or delete channels only for major channel.

Once you delete a DTV channel, you cannot recover the channel without performing auto channel scan again. (Refer to “Auto Channel Scan” on page 14.)

By using [CH. K/ L], you can select the memorized channels only.

e.g.) digital TV mode

or

- CHANNEL SETUP -

ADD/DELETE(DTV) AUTO PRESET CH(DTV)

AUTO PRESET CH(TV/DTV) AUTO PRESET CH(CATV)

! CATV takes approx. 50min.

4Select the channel you want to add or delete. (Refer to “Channel Selection“ on page 15.)

e.g.) digital TV mode

D25

ADD/DELETE : DTV

5 Use[Cursor s/ B] to select “ADD” or “DELETE”.

or

To add or delete another channels, repeat steps 4 to 5.

Color of channel number displayed at the right top of the TV screen indicates;

-Blue: The selected channel will be added.

-Red: The selected channel will be deleted.

20

EN