Fisher CV500
Emerson Fisher CV500, Fisher 8510B, Fisher 8560, Fisher 8580, Fisher POSI-SEAL A81 Brochure
...
Product Flier
PF51.3:010
D102426X012
October 2010
Rotary Valve Selection Guide
Fisher Rotary Valve Selection
Guide
W6539/IL
V260 VALVE
Control-Disk Valve
Vee -Ball Valves High-capacity, low-friction, non-clogging
High-Performance Butterfly
Valves
Pipeline Valves
Eccentric Plug Valves
W9415/IL
Vee-Ball VA LVE
Figure 1. Typical Fisher Rotary Valves
Expanded control range, lower process
variability
Outstanding performance under extreme
pressure and temperature conditions,
available for a variety of throttling or on/off
applications
Full- or reduced-bore ball valves for
throttling and severe service applications
in gas transmission lines, gas distribution,
or liquid pipelines
Designed for throttling control for a broad
range of industrial applications
ENVIRO-SEAL live-loaded packing systems are available to assist in compliance
with environmental emissions requirements
FIELDVUE digital valve controllers offer digital control and remote diagnostics. The
traditional proven line of Fisher positioners, controllers, transmitters, and switches
also is available.
Spring-return pneumatic diaphragm and double-acting piston actuators
Contact your Emerson Process Management sales office for details
W9406/IL
Control-Disk VALV E
Fisher Control-Disk Valve
Fisher V150, V200, V300, and V150S
Fisher 8510, 8532, 8580, 9500, and DSV
POSI-SEAL A11, A31A, A31C, A31D,
Fisher
and A81
Fisher V250 and V260
Fisher V500 and CV500
www.Fisher.com
Rotary Valve Selection Guide
Fisher Control-Disk Valve
W9421/IL
Control-Disk VALVE
Figure 2. Fisher Control-Disk Valve
Control-Disk Valve
Applications
Expanded control, lower process variability applications
Style
Wafer and single flange
Sizes
NPS 2, 3, 4, 6, 8, 10, 12
Ratings
PN 10 to 40
CL150 and CL300
End Connections
Raised-face (RF)
Valve Body Materials
EN: 1.0619 steel, 1.4409 stainless steel, CW2M, or M35-1
ASME: SA216 WCC steel, SA351 CF3M stainless steel, CW2M, or M35-1
Disk Material
SA351 CF3M stainless steel
Seal Types (Material)
Soft (PTFE or UHMWPE) or metal (S31600)
Flow Characteristics and Maximum Flow Coefficients
Equal percentage
Maximum Cv from 60.7 to 4530
Rangeability (Flow Coefficient Ratio)
100 to 1
Shutoff Class
Soft Seal: Bubble-tight
Metal Seal: 1% of Class IV
Available Actuators (refer to page 12)
Fisher 2052, 1051, 1052, and 1061
Product Flier
PF51.3:010
October 2010
2
Product Flier
PF51.3:010
October 2010
Fisher Vee-Ball Valves
Rotary Valve Selection Guide
W74351/IL
V150 and V300 VALVES
W5787/IL
V200 VALVE
Figure 3. Fisher Vee-Ball Valves
V150 AND V300 V200 V150S
Applications
Excellent for fibrous slurries as well as liquids,
gas, and steam. Shearing V-notch ball for
smooth, non-clogging action.
V150: DN 25 - 500 or NPS 1 - 24 x 20
V300: DN 25 - 500 or NPS 1 - 20
V150: PN 10/16 or CL150
V300: PN 25/40 or CL300
Raised-face (RF) flanged
EN: 1.0619 steel, 1.4409 stainless steel, M35-1,
or CW2M
ASME: SA216 WCC steel, SA351 CF3M, CG8M
stainless steel, M35-1, or CW2M
SA351 CF3M, or CG8M stainless steel, CW2M SA351 CF3M or CG8M stainless steel, CW2M
TCM Plus, metal (S31600), HD (heavy duty)
metal, or flow ring
Modified equal percentage
Maximum Cv from 3.64 to 10,300
300 to 1 300 to 1
Composition Seal: Class VI
Metal Seal: Class IV
Flow Ring Construction: 5% of wideopen
capacity
Fisher 2052, 1051, 1052, 1061, and FieldQ
Excellent for fibrous slurries as well as liquids,
gas, and steam. Shearing V-notch ball for
smooth, non-clogging action.
Sizes
NPS 1, 1-1/2, 2, 3, 4, 6, 8, 10
Ratings
CL150, CL300, or CL600 depending on size. CL150
End Connections
Flangeless
Valve Body Materials
EN: 1.0619 steel, 1.4409 stainless steel, M35-1,
or CW2M
ASME: SA216 WCC steel, SA351 CF3M,
CG8M stainless steel, M35-1, or CW2M
Ball Material
Seal Types (Material)
TCM Plus, metal (S31600), HD (heavy duty)
metal, or flow ring
Flow Characteristics and Maximum Flow Coefficients
Modified equal percentage
Maximum Cv from 8.4 to 3000
Rangeability
Shutoff Class
Composition Seal: Class VI
Metal Seal: Class IV
Flow Ring Construction: 5% of wideopen
capacity
Available Actuators (refer to page 12)
W8509/IL
V150S VALVE
Highly wear-resistant trim materials and an
unrestricted flow path make this design ideal for
controlling the most abrasive of slurries.
NPS 3, 4, 6, 8, 10, 12
Raised-face (RF) flanged
SA216 WCC steel body liner: (high-chrome iron
SA532 Class III Type A)
High-chrome iron SA532 Class III Type A (PSZ
ceramic ball is optional)
Flow ring construction
Modified equal percentage
Maximum Cv from 170 to 2850
Class I
3
Rotary Valve Selection Guide
Fisher High-Performance Butterfly Valves
Product Flier
PF51.3:010
October 2010
W9498/IL
8580 VALVE
W9536/IL
8532 VALVE
W3542/IL
8510 VALVE
Figure 4. Fisher High-Performance Butterfly Valves
8580 8532 8510
Applications
Precise throttling service for process
temperatures from -129 to 454C
Wafer and single flange Wafer and single flange
DN 50, 80, 100, 150, 200, 250, 300
NPS 2, 3, 4, 6, 8, 10, 12
PN 10 to 40
CL150 and CL300
Raised-face (RF) Raised-face (RF) and ring-type joint (RTJ) Raised-face (RF)
EN: 1.0619 steel, 1.4409 stainless steel
ASME: SA216 WCC steel, SA351 CF3M
stainless steel
High-alloy materials are available
SA351 CF3M stainless steel SA351 CF8M stainless steel
Soft (PTFE or UHMWPE) or metal (S31600) Soft (PTFE), NOVEX, and Phoenix III Soft (PTFE) or metal (S31600)
Approximately linear
Maximum C
100 to 1 100 to 1 100 to 1
Soft Seal: Class VI
Metal Seal: 1% of Class IV
Fisher 2052, 1051, 1052, and 1061 Fisher 1051, 1052, and 1061 Fisher 2052, 1051, 1052, and 1061
from 83.7 to 5080
v
Throttling service, high-temperature, and
cryogenic applications; -196 to 816C
Style
Sizes
NPS 14, 16, 18 ,20, 24
Ratings
CL150 and CL300
End Connections
Valve Body Materials
SA216 WCC steel or SA351 CF8M stainless
steel
High-alloy materials are available
Disc Material
Seal Types (Material)
Flow Characteristics and Maximum Flow Coefficients
Modified equal percentage
Maximum C
Soft Seal: Class VI
NOVEX Seal: SP-61
Phoenix III Seal: Class VI
from 4550 to 21500
v
Rangeability
Shutoff Class
Available Actuators (refer to page 12)
General-purpose valve for a variety of liquids
and gasses
Wafer and single-flange
DN 350, 400, 500, 600
NPS 14, 16, 18, 20, 24
PN 16
CL150
SA216 WCC steel or SA351 CF8M stainless
steel; high-alloy materials are available
SA216 WCC steel or SA351 CF8M stainless
steel
Approximately linear
Maximum Cv from 7040 to 21800
PTFE Seal: Bidirectional Class VI
S31600 Seal: 1/10 of Class IV
4
Product Flier
PF51.3:010
October 2010
Rotary Valve Selection Guide
Fisher High-Performance Butterfly Valves (Continued)
W1628/IL
9500 VALVE
W6094/IL
Figure 5. Fisher High-Performance Butterfly Valves (Continued)
9500 DSV
Applications
Fully lined butterfly valve for on/off or throttling service for tight-shutoff
applications
Wafer Wafer
NPS 2, 3, 4, 6, 8, 10, 12 NPS 4, 6, 8, 10, 12, 14
PN10, PN13, CL125B, CL150, or CL300 depending on size and material CL300
End Connections
Cast Iron Bodies: Mate with PN 10 (NPS 2, 3, 6, 8, 10) or CL125B FF
flanges
Steel and Stainless Steel Bodies: Mate with PN16, CL150, CL300 RF
flanges
Valve Body Materials
Cast iron, carbon steel, S31600 stainless steel SA240 S31600 stainless steel
Aluminum bronze, S31600 stainless steel SA351 CG8M stainless steel
Seal Types (Material)
Fully lined nitrile or PTFE No seal
Flow Characteristics and Maximum Flow Coefficients
Approximately equal percentage through 90 rotation for FISHTAIL
disc and through 60 rotation for conventional disc
Maximum Cv from 91 to 7020
100 to 1 100 to 1
Class VI 5% of valve capacity
Available Actuators (refer to page 12)
Fisher 2052, 1051, 1052, and 1061
Rapid on/off, high-cycle applications; temperatures to 232C
Style
Sizes
Ratings
Mates with CL300 RF flanges
Disc Material
On/off service
Maximum Cv from 434 to 7040
Rangeability
Shutoff Class
Fisher 1061
DSV VALVE
5
Loading...