Emerson FTA1000, FTA1250, FTA1300, FTA1350, FTA1500 Brochures and Data Sheets

ElectricFirePump Controllers

Side-by-side disconnect/ circuit breaker provides single handle sequencing

Combined automatic and manual fire pump controllers for starting electric motor driven fire pumps.

Firetrol® combined automatic and manual fire pump controllers are intended for starting electric motor driven fire pumps and are available in the following configurations:

FTA1000 – Full Voltage Starting

FTA1250 – Part Winding Reduced Current Starting (Closed Circuit Transition)

FTA1300 – Wye-Delta Reduced Voltage Starting (Open Circuit Transition)

FTA1350 – Wye-Delta Reduced Voltage Starting (Closed Circuit Transition)

FTA1500 – Primary Resistance Reduced Voltage Starting (Closed Circuit Transition)

FTA1800 – Autotransformer Reduced Voltage Starting (Closed Circuit Transition)

FTA1930 – Digital Solid State Reduced Voltage Starting (Closed Circuit Transition)

These Controllers are available assembled with power transfer switches for use with an emergency generator set or second power source.

Operator Interface

The fire pump controllers feature an operator interface with user keypad. The interface monitors and displays motor operating conditions, including all alarms, events, and pressure conditions. All alarms, events, and pressure conditions are displayed with a time and date stamp. The display is a 128x64 Backlit LCD capable of customized graphics and cryllic type character display. The display and interface are NEMA rated for Type 2, 3R, 4, 4X, and 12 protection and is fully accessible without opening the controller door. The user interface utilizes multiple levels of password protection for system security. A minimum of 3 password levels are provided.

Approvals

Firetrol fire pump controllers are listed by Underwriters’ Laboratories, Inc., in accordance with UL218, Standard for Fire Pump Controllers, CSA, Standard for Industrial Control Equipment, and approved by Factory Mutual. They are built to meet or exceed the requirements of the approving authorities as well as NEMA and