Elmo Elmo Security Camera ESD-370 User Manual

Size:
1.19 Mb
Download

Integrated High Speed Dome Camera

ESD-370

Indoor Dome

User’s Manual

User’s Manual

Notice

The information given in this manual was current when published. The company reserves the right to revise and improve its products. All specifications are subject to change without notice.

Copyright

Under copyright laws, the contents of this user manual may not be copied, photocopied, translated, reproduced or reduced to any electronic medium or machine-readableformat, in whole or in part, without prior written permission of the company.

Important Information

Before proceeding, please read and observe all instructions and warnings in this manual. Retain this manual with the original bill of sale for future reference and, if necessary, warranty service. When unpacking your unit, check for missing or damaged items. If any item is missing, or if damage is evident, DO NOT INSTALL OR OPERATE THIS PRODUCT. Contact your dealer for assistance.

1

User’s Manual

Cautions

Handle the camera carefully

Do not abuse the camera. Avoid striking, shaking, etc. The camera could be damaged by improper handing or storage.

Do not disassemble the camera

To prevent electric shock, do not remove screws or covers. There are no user serviceable parts inside. Ask a qualified service person for servicing.

Do not block cooling holes on the bracket

This camera has a cooling fan inside. Blocking the cooling holes leads to build up of heat the camera and may cause malfunction.

Do not operate the camera beyond the specified temperature, humidity or power source ratings

Use the camera under conditions where temperature is between 0°C ~ 40°C (32°F ~ 104°F), and humidity is below 90%.

Do not expose the camera to rain or moisture, or try to operated it in wet areas

This product is designed for indoor use or locations where it is protected from rain and moisture. Turn the power off immediately if the camera is wet and ask a qualified service person for servicing. Moisture can damage the camera and also create the danger of electric shock.

Do not use strong or abrasive detergents when cleaning the camera body

Use a dry cloth to clean the camera when dirty. In case the dirt is hard to remove, use a mild detergent and wipe gently.

Never face the camera towards the sun

Do not aim the camera at bright objects. Whether the camera is in use or not, never aim it at the sun or other extremely bright objects. Otherwise, the camera may be smeared or damaged.

2

User’s Manual

 

 

 

Content

 

1.

Overview ....................................................................................................................................

 

5

 

1.1

Product Features.............................................................................................................

6

 

1.2

Product Application .........................................................................................................

7

2. Connecting the High Speed Dome ..........................................................................................

8

 

2.1

Package Content.............................................................................................................

8

 

2.2

Switch Definition..............................................................................................................

9

 

2.3

RS-485 Setting................................................................................................................

9

 

2.4

Dome ID Setting............................................................................................................

10

 

2.5

Dome Control Protocol..................................................................................................

10

 

2.6

22-Pin Connector Definition ...........................................................................................

11

 

2.7

Alarm Pin Definition.......................................................................................................

13

 

2.8

RS-485 Connector ........................................................................................................

13

3.

Operation and Configuration .................................................................................................

14

 

3.1

OSD Display Format .....................................................................................................

14

 

3.2

OSD Menu Tree ............................................................................................................

15

 

3.3

Configuration Menu.......................................................................................................

18

 

 

3.3.1

DEFAULT CAMERA ........................................................................................

18

 

 

3.3.2

BACKLIGHT ....................................................................................................

19

 

 

3.3.3

FOCUS ............................................................................................................

19

 

 

3.3.4

APERTURE .....................................................................................................

19

 

 

3.3.5

AE MODE ........................................................................................................

20

 

 

3.3.6

WBC MODE ....................................................................................................

21

 

 

3.3.7

ID DISPLAY .....................................................................................................

21

 

 

3.3.8

SETUP MENU .................................................................................................

22

 

 

FLIP (IMAGE/ME/OFF)............................................................................

22

 

 

ZOOM SPEED.........................................................................................

23

 

 

SPEED BY ZOOM ...................................................................................

23

 

 

AUTO CALIBRATION ..............................................................................

23

 

 

DIGITAL ZOOM .......................................................................................

23

 

 

SLOW SHUTTER ....................................................................................

24

 

 

ANGLE ADJUSTER.................................................................................

24

 

 

RESET.....................................................................................................

24

 

 

EXIT.........................................................................................................

24

 

 

3.3.10

TITLE DISPLAY...............................................................................................

25

 

 

3.3.11

TITLE SETTING ..............................................................................................

25

 

 

3.3.12

ALARM SETTING............................................................................................

26

3

 

 

 

 

 

 

User’s Manual

3.3.13

HOME SETTING .............................................................................................

27

3.3.14

SEQUENCE ....................................................................................................

29

3.3.15

AUTOPAN........................................................................................................

30

3.3.16

CRUISE ...........................................................................................................

32

3.3.17 IR FUNCTION (Removable IR Cut).................................................................

33

3.3.18 ALARM DETECT (E/F/U Model Only) ...............

Error! Bookmark not defined.

3.3.19 WDR Setting (DR Model Only) ........................................................................

33

3.3.20

PRIVACY .........................................................................................................

34

3.3.21

TIME FUNCTION ............................................................................................

36

3.3.22

SCHEDULE FUNCTION .................................................................................

37

3.3.23

EXIT OSD........................................................................................................

38

Appendix A: Technical Specification ..........................................................................................

39

OSD Menu Notes

...........................................................................................................................

41

4

User’s Manual

1.Overview

ESD-370is a new subcompact integrated high speed dome camera designed to deliver superb performance and durability with an intelligent and stylish housing that is suitable in any security and surveillance installation.ESD-370series dome cameras support one cabling for easy installation, and can be integrated with CCTV products, such as DVRs, Control Keyboards, and CCTV accessories for a total surveillance solution.

The Integrated High Speed Dome Camera provides two models of new generation advanced DSP color camera:

DR Model: 23× optical zoom multiply 12× digital magnifier

S Model: 22× optical zoom multiply 12× digital magnifier

The dome delivers the power of 312x zoom to allow dome cameras capture clear image in the distance. Continuous Auto Focus, Back Light Compensation, Auto Exposure, Digital Slow Shutter functions are provided for clear and high quality image. IR cut filter removable ensures 24 hours operation; more Privacy Masks are specially designed to avoid any intrusive monitoring at specific region; Wide Dynamic Range function, are some of the salient features incorporated to fit your needs. The Home function allows user to specify a preset position as the ‘home position’ or functions (Sequence/Auto-pan/Cruise),dome camera can come back to home position or functions when the user stops to control the camera for a user defined period of time. Additionally, Scheduling function, the unique feature, enables users to program a preset point or function(Sequence/Auto-pan/Cruise)automatically actions in certain period of time.

The dome provides variable pan/tilt speeds ranging from a fast patrol of 400° per second to a slow ramble of 5° per second with 0.225° pan accuracy for fast and accurate tracking ability. The 360° endless rotation and -10°~190°tilt travel makes tracking the object passing directly beneath the dome. Maximum 256 preset points can be programmed for precise location of target areas, and you can also define 8 sequence, 4auto-panand 1 cruise routes for the camera to operate automatically.RS-485communication port is available for remote control purposes.

The Integrated High Speed Dome Camera provides 8 alarm inputs and 2 alarm output, and the smart alarm management mechanism can be programmed through OSD setup menu; certain function (Preset/Sequence/Auto-Pan/Cruise)can be activated when an

5

User’s Manual

alarm is triggered.

Large set of built-inprotocols provide connectivity to other surveillance systems. Thebuilt-inprotocols include ELMO, Pelco, VCL, Philips,AD-422(Manchester), etc, which allow the Integrated High Speed Dome Camera series to be integrated with other suppliers' surveillance systems.

Dependability and ultra high reliability are key factors in the speed dome design cycle. Every speed dome is assembled with meticulous care and thorough testing at our ISO 9001 compliant factory. High performance, reliability, and reasonably pricing make this speed dome to be an ideal solution to your tough surveillance requirement.

1.1Product Features

Precise and Accurate Tracking

Auto Calibration

Scheduling Functions

Pan driver accuracy of 0.225°

Preset speed up to 400°/sec.

Pan & Tilt proportional to Zoom Ratio

256 Preset Position/8 Sequence /4 Auto-Pan /1Cruise

Day/Night Features

Removable IR Cut Filter (DR Model)

Low-LightApplications

Minimum illumination 0.01 Lux

Digital Slow Shutter

Electronic Shutter

Perfect Contrast Solution for High Image Quality

Wide Dynamic Range (DR Model)

Auto White Balance

Auto Gain Control

Backlight Compensation

Auto Iris Control

Multiple Built-inProtocols Enhanced High Compatibility

ELMO

Pelco D & P

VCL

Philip

6

User’s Manual

AD/AD-422

Chiper

Privacy Mask for Privacy Protection

Up to 24 privacy zones of camera view programmable

Dynamic Dome Configuration

Flexible In/Outdoor mountings

Compact lightweight design for easy installation

Weather resistant housing for temperature, sun ray, and rain

Integrated with Web, Enhanced Internet Capability (Optional)

Remote monitoring operation/system configuration/software upgrade

Include Window active applications

1.2Product Application

Connect the dome camera to other devices as shown in the diagram to complete a video surveillance solution.

7

User’s Manual

2.Connecting the High Speed Dome

Please refer to the following sections to connect, set and operate the dome camera. In order to control the integrated high speed dome, basically a control keyboard or other control device is required.

2.1Package Content

Before proceeding, please check the box contains the items listed here. If any item is missing, or if damage is evident, DO NOT install or operate the product and contact your dealer for assistance.

Hard Ceiling Mount and

 

Decoration Ring

5.4” Optical Cover

Dome Body

 

with 5” cover

50-cmcable for Power

 

 

 

Fixing Plate

Supply, Video and RS-485

 

 

 

8

User’s Manual

2.2Switch Definition

First of all, configuring the dome ID and communication protocol is required before connecting the dome camera to other devices. The switches used for configuring these settings are located on the bottom of the dome camera.

Indoor Dome

AReserved

BRS-485Setting

CDome ID Setting

DDome Control Protocol

EN/A

F22-PinConnector

2.3RS-485Setting

The RS-485setting default ishalf-duplex,please do not change without qualified specialist or supplier’sRS-485is the interface that communicates the dome camera and its control device; for this reason, theRS-485setup of the dome and the control device must the same. TheRS-485default setting ishalf-duplex.

RS-485Communication

9