|
|
Space-ette® Series Flush to Wall Refrigerated |
SPECIFICATIONS |
Air Cooled Floor Mounted |
|
Models FD7003*, FD7005*, FD70010* & FD700D* |
||
|
|
|
PRODUCT SPECIFICATION
Self-contained, electric floor model water cooler. Capacity of 50°F drinking water, based upon 80°F inlet water and 90°F ambient. Model FD700D* is non-refrigerated and shall deliver non-chilled drinking water. Cabinet design allows for flush to wall installation. Removable front panel and cabinet sides.
Non-Pressurized tank system is standard.
Non-Pressurized tank system is standard. Non-pressurized water tank is located after bubbler valve, so that tank is subject to line pressure only when valve button is pressed.
Unit shall be lead-free design which is certified to NSF/ANSI 61 and 372 and meets Federal and State low-lead requirements. Unit shall be certified to UL399 and CAN/CSA 22.2 No. 120.
STANDARD FEATURES
•Extra deep basin minimizes splashing; with integral vandal-resistant strainer
•Exclusive Flexi-Guard® Safety bubbler
•Cooler Panel Finish: Impact-resistant vinyl coating or Stainless Steel
•Rated for Indoor use
COOLING SYSTEM
•Compressor: Hermetically-sealed, reciprocating type, single phase.
Sealed-in lifetime lubrication.
•Condenser: Fan cooled, copper tube with aluminum fins. Fan motor is permanently lubricated.
•Cooling Unit: Combination tube-tank type. Tube portion is continuous coil of copper tubing. Fully insulated with EPS foam which meets Underwriters
Laboratories Inc. Requirements for self extinguishing material.
•Refrigerant Control: Refrigerant R134a is controlled by accurately calibrated capillary tube.
•Temperature Control: Easily accessible enclosed adjustable thermostat is factory preset. Requires no adjustment other than for altitude requirements.
RATED FOR INDOOR USE ONLY
CONSTRUCTION
•Stainless Steel basin with integral vandal-resistant strainer
•Galvanized structural steel cooler chassis provides structural integrity
•Cooler cabinet available as Light Gray Granite or Sandalwood Vinyl Clad Steel or Stainless Steel (additional cost) construction
•Exclusive Flexi-Guard® Safety bubbler utilizes an infused anti-microbial pliable polyester elastomer to prevent accidental mouth injuries. Flexes on impact
•† Option for additional Glass Filler (ordered separately)
Warranty: 5 year limited warranty on the unit’s refrigeration system.
Electrical components and water system are warranted for 12 months from date of installation or 18 months from factory shipment, whichever date falls first.
|
|
|
|
|
|
|
† Glass Filler |
|
|
|
|
|
CAPACITIES CHART |
|
|
|
(option) (F) |
|
|
||
|
|
|
|
|
|
|
available |
|
|
|
|
|
|
|
|
|
|
at extra cost |
|
|
|
|
|
|
|
|
|
|
(order separately) |
|
|
|
|
|
|
|
|
|
|
UL399 and |
|
||
|
|
|
|
|
|
Approx. |
Requires |
NSF/ANSI |
||
|
|
|
Chilling** |
F.L. |
Rated |
CAN/CSA 22.2 |
||||
Model |
Voltage / Hertz |
Ship |
Factory prep to |
61 and 372 |
||||||
Capacity |
Amps |
Watts |
No. 120 |
|||||||
|
|
|
Wt. |
receive glass fille |
Certified |
|||||
|
|
|
|
|
|
|
|
Certified |
|
|
† FD7003*1Z |
115V / 60Hz |
3.0 GPH |
3.5 |
230 |
54 lbs. |
YES |
• |
• |
||
† FD7003*2YJO |
220V |
/ 50Hz |
2.5 GPH |
2.0 |
230 |
54 lbs. |
YES |
++ |
• |
|
† FD7003*3YJO |
220V |
/ 60Hz |
3.0 GPH |
2.0 |
230 |
54 lbs. |
YES |
++ |
• |
|
† FD7005*1Z |
115V / 60HZ |
5.0 GPH |
3.5 |
230 |
54 lbs. |
YES |
• |
• |
||
† FD7005*2YJO |
220V |
/ 50Hz |
4.2 GPH |
2.0 |
230 |
54 lbs. |
YES |
++ |
• |
|
FD7005*3YJO |
220V |
/ 60Hz |
5.5 GPH |
2.0 |
230 |
54 lbs. |
YES |
++ |
• |
|
† FD70010*1Z |
115V / 60Hz |
9.8 GPH |
6.8 |
535 |
65 lbs. |
YES |
• |
• |
||
† FD70010*2YJO |
220V |
/ 50Hz |
8.2 SPH |
2.5 |
535 |
65 lbs. |
YES |
++ |
• |
|
FD70010*3YJO |
220V |
/ 60Hz |
10.8 GPH |
3.0 |
535 |
65 lbs. |
NO |
++ |
• |
|
FD700D* |
|
– |
– |
– |
– |
29 lbs. |
NO |
• |
• |
*Color code of (L) Light Gray Granite, (T) Sandalwood, or (S) Stainless Steel cooler panels. **Based on 80°F inlet water & 90°F ambient air temp for 50°F chilled drinking water.
†Glass Filler available at extra cost. (Use Code (F). Requires factory preparation to receive glass filler. (Glass Filler ordered separately.)
++Complies; not third party certified.
This specification describes an Elkay product with design, quality and functional benefits to the user. When making a comparison of other producer’s offerings, be certain these features are not overlooked.
In keeping with our policy of continuing product improvement,
Elkay reserves the right to change specification without notice. Please visit elkay.com for the most current version.
2222 Camden Court
Oak Brook, IL 60523
630-572-3192
elkay.com
© 2016 Elkay
SPEC09-05 (02/2016)