SPECIFICATIONS
Dayton® Double Bowl Sink Models D, DJ, DD and DDJ Series
GENERAL
Sink is formed of #22 gauge, type 301 series, nickel-bearing stainless steel.Top mount.
DESIGN FEATURES
Bowl Depth: See next page
Coved Corners: D22519: 2-1/4” (57mm) vertical and horizontal radius
D23317, D23319: 2-1/2” (64mm) vertical and 2-3/4” (70mm) horizontal radius
D23321, D(J)23322, DD(J)23322: 4” (102mm) vertical and 3-1/4” (83mm) horizontal radius
Rim Height: 3/16” (5mm)
Faucet Deck: Raised (except D22519, D23317 and D23319 series).
Finish: Exposed surfaces are polished to a satin finish. Underside: Undercoated on bottom of bowls
OTHER
Drain Opening: 3-1/2" (89mm)
Note: Unless otherwise specified, sink is furnished with 3 or 4 faucet holes as shown.
Installation Hardware: Included for 3/4” (19mm) countertop.
OPTIONAL ACCESSORIES
Bottom Grid: GBG1414SS (D23317 & D23319), GBG1415SS (D23321 & D23322)
Drain: LK35, D1125
Sink complies with ASME A112.19.3-2008 / CSA B45.4-08.
These sinks are listed by the International Association
of Plumbing and Mechanical Officials as meeting the
C 
requirements of the Uniform Plumbing Code and the
National Plumbing Code of Canada.
SINKS ARE
MADE IN THE USA
SINK DIMENSIONS (INCHES)*
|
|
|
|
|
Inside |
|
Cutout in |
No. of 1-1/2” |
|
||
|
|
|
|
|
|
Countertop |
|
||||
|
|
Overall |
|
Each Bowl |
(1-1/2"(38mm) |
(38mm) Dia. |
Minimum |
||||
U-Channel |
J-Channel |
|
|
|
|
|
Radius Corners) |
Faucet Holes |
Cabinet |
||
L |
W |
L |
W |
D |
|||||||
Model |
Model |
|
|
4"(102mm) Center |
Size |
||||||
Number |
Number |
A |
B |
C |
D |
E |
L |
W |
|
|
|
D22519 |
– |
25 |
19 |
10 |
14 |
6-1/4 |
24-3/8 |
18-3/8 |
1 , 3, or 4 |
30 |
|
|
(635mm) (483mm) |
(254mm) (356mm) (159mm) |
(619mm) (467mm) |
|
(762mm) |
||||||
|
|
|
|||||||||
D23317 |
– |
33 |
17 |
14 |
14 |
6 |
32-3/8 16-3/8 |
None |
36 |
||
|
(838mm) (432mm) |
(356mm) (356mm) (152mm) |
(822mm) (416mm) |
|
(914mm) |
||||||
D23319 |
– |
33 |
19 |
14 |
14 |
6-7/16 |
32-3/8 18-3/8 |
1 , 2, MR2, 3, 4 or 5 |
36 |
||
|
(838mm) (483mm) |
(356mm) (356mm) (164mm) |
(822mm) (467mm) |
|
(914mm) |
||||||
D23321 |
– |
33 |
21-1/4 |
14 |
15-3/4 6-1/2 |
32-3/8 20-5/8 |
1 , 2, MR2, 3, 4 or 5 |
36 |
|||
|
(838mm) (540mm) |
(356mm) (400mm) (165mm) |
(822mm) (524mm) |
|
(914mm) |
||||||
D23322 |
DJ23322 |
33 |
22 |
14 |
15-3/4 6-9/16 |
32-3/8 21-3/8 |
1 , 2, MR2, 3, 4 or 5 |
36 |
|||
|
|
(838mm) (559mm) |
(356mm) (400mm) (167mm) |
(822mm) (543mm) |
|
(914mm) |
|||||
|
|
|
|
|
|
|
|
|
|||
DD23322 |
DDJ23322 |
33 |
22 |
14 |
15-3/4 7-1/16 |
32-3/8 21-3/8 |
1 , 2, MR2, 3, 4 or 5 |
36 |
|||
|
|
(838mm) (559mm) |
(356mm) (400mm) (181mm) |
(822mm) (543mm) |
|
(914mm) |
|||||
|
|
|
|
|
|
|
|
|
|
|
|
*Length is left to right. Width is front to back.
Model D233224
Model D233194
Model D23317
U-Channel Type Mounting System
J-Channel Type Mounting System
In keeping with our policy of continuing product improvement, Elkay reserves the right to change product specifications without notice.
This specification describes an Elkay product with design, quality and functiona lbenefits to the user. When making a comparison of other producers’ offerings, be certain these features are not overlooked.
Elkay |
2222 Camden Court |
Printed in U.S.A. |
|
elkayusa.com |
Oak Brook, IL 60523 |
©2011 Elkay |
|
|
(Rev. 6/11) 2-14H |
||
|
|
||
Loading...