D117190
GENERAL
Sink is formed of #22 gauge, type 301 series, nickel-bearing stain-
less steel.Topmount.
DESIGN FEATURES
Bowl Depth: See chart on next page
Coved Corners:
D11719: 2-1/2” (64mm) vertical and 2-3/4” (70mm) horizontal radius
D11721, D12521, D(J)12522, DD(J)12522: 4” (102mm) vertical and
3-1/4” (83mm) horizontal radius.
Faucet Deck: Raised (except D11719 and D11721).
Finish: Exposed surfaces are polished to a satin finish.
OTHER
Drain Opening: 3-1/2" (89mm)
N
OPTIONAL ACCESSORIES
Bottom Grid: GBG1414SS (D11719), GBG1415SS (D11721),
GBG2115SS (D12521/D12522/DD12522)
Drain: LK35, D1125
ote: Unless otherwise specified, sink is furnished with 3 or 4
faucet holes as shown.
Model D125224
Model D117193
Elkay
2222 Camden Court
Oak Brook, IL 60523
Printed in U.S.A.
©2011 Elkay
(Rev. 6/11) 2-15I
elkayusa.com
In keeping with our po licy of cont inuing product improvement, Elkay reserves the right t o change
produc t specifications wit hout not ice.
This specification describes an Elkay p roduct wit h design, quality and functio nal benefits t o the
user. When making a comparison of ot her producers’ offerings, be c ertain these features are not
overlooked.
Dayton
®
Single Bowl Sink
Models D, DJ, DD and DDJ Series
SP EC IFICATIONS
U-Channel Type Mounting System
J-Channel Type Mounting System
SEE NEXT PAGE FOR PRODUCT DIMENSIONS.
Installation Hardware: Included for 3/4” (19mm) countertop.
Underside: Undercoated on bottom of bowl
SINKS ARE
MADE IN THE USA
Rim Height: 5/32” (4mm)
C
These sinks are listed by the International Association
of Plumbing and Mechanical Officials as meeting the
requirements of the Uniform Plumbing Code and the
National Plumbing Code of Canada.
Sink complies with ASME A112.19.3-2008 / CSA B45.4-08.
Loading...