Elkay CHSP1716LRSSAC, CHSP1716LRSSBC, CHSP1716LRSSACC, CHSP1716LRSSACTMC, CHSP1716LRSSBTMC User Manual

...
0 (0)
Elkay CHSP1716LRSSAC, CHSP1716LRSSBC, CHSP1716LRSSACC, CHSP1716LRSSACTMC, CHSP1716LRSSBTMC User Manual

 

Hand Wash-Up Sink with Side Splashes,

 

Sensor Faucet and Pedestal – AC or Battery Powered

SPECIFICATIONS

Models CHSP1716LRSSAC and

CHSP1716LRSSB Series

 

 

GENERAL

CHSP1716LRS Type 304 (18-8) stainless steel hand wash-up sink with 7" (178mm) high right and left side splashes. Basin has 1-3/4" (45mm) radius coved corners. Full length 7" (178mm) high backsplash. Exposed surfaces have a brushed finish. Furnished with stainless steel pedestal and wall hanger. Carries NSF International Certification.

(CHECK MODEL SPECIFIED)

 

 

MIXING

MODEL

FAUCET DRAIN TRAP VALVE

CHSP1716LRSSACC

LK722AC

LK8

LK500 NONE

CHSP1716LRSSACMC

LK722AC

LK8

LK500 LK724

CHSP1716LRSSACTMC

LK722AC

LK8

LK500 LK723

CHSP1716LRSSBC

LK722B

LK8

LK500 NONE

CHSP1716LRSSBMC

LK722B

LK8

LK500 LK724

CHSP1716LRSSBTMC

LK722B

LK8

LK500 LK723

LK722AC Sensor-operated, non-mixing (tempered water), backsplash-mounted gooseneck faucet with adjustable sensor eyes. A continuous beam is emitted from sensor. The sensor faucet is activated by user placing hands under the spout. Tempered water will flow as long as hands remain within sensor range. When hands are removed, the water stops automatically based on shut off delay settings. The sensor then resets and is ready for the next user. AC powered, chrome plated - solid brass body construction and 12-3/4" (324mm) high (bottom of base to top of spout) 8-3/4" (222mm) from aerator to base, 5-3/8" (137mm) reach C.P. spout with 2.0 gpm laminar flow control on spout end. Includes vandal-resistant, waterresistant sensor control module with armored vandal-resistant control and power cables. 12V DC plug-in voltage adapter, slow-closing piston operated solenoid valve, in-line filter with clean out trap, and 3/8" (10mm) copper fittings for supply tube

Model CHSP1716LRSSACC

Model CHSP1716LRSSBC

(Pedestal Mount)

furnished by contractor. Control circuit is solid state, has adjustable sensor range (6" [152mm] preset to 30" [762mm]), shut off delay preset at 1 second and field adjustable to 2, 4 or 8 seconds, and automatic time-out feature (to prevent sink overflow) is preset at 0 seconds and is field adjustable to 15, 30 or 60 seconds.

LK722B Same as LK722AC except battery powered and has a battery holder with (4) AA batteries.

LK8 Chrome plated grid strainer with 1-1/2" (38mm) O.D. tailpiece.

LK500 Satin chrome cast brass "P" trap with cleanout, chrome plated 1-1/2" (38mm) O.D. tubing waste arm to wall, and wall flange.

 

 

 

16-3/4"

 

LK723 Anti-scald thermostatic mixing valve with nickel-plated

 

 

 

(425mm)

 

brass body 1/2" (13mm) SWT inlets and outlet connections,

 

 

2-3/8"

12"

2-3/8"

check valves on inlets and a mixed temperature range of

 

(60mm)

(305mm)

(60mm)

80°- 120°F. Certified under ASSE1016.

 

2"

 

 

 

 

 

LK724 Mechanical mixing valve with C.P. brass body, 3/8"

 

(51mm)

 

 

 

3-7/8"

 

 

 

(10mm) compression inlets and outlet connections, and check

(98mm)

 

 

2-3/16" DIA. HOLE

valves on inlets.

15-1/2"

 

 

 

 

 

 

 

(56mm)

 

(394mm)

 

 

 

 

 

9-1/4"

 

 

RAISED RIM AT

 

(235mm)

 

1-3/4" R

 

 

 

 

FRONT & SIDES

 

 

 

 

(45mm)

 

 

 

 

 

 

 

2-3/8"

WALL

C

 

 

 

5-3/4" L 5-3/4"

 

 

 

(60mm)

HANGER

(146mm) (146mm)

1/4" (6mm) DIA. 3 HOLES

 

 

 

 

 

 

 

 

 

 

C

 

 

 

 

 

L

 

 

 

 

 

 

 

4"

 

BACKSPLASH SLOPED

 

 

 

AT 45°ANGLE

 

7"

(102mm)

 

 

 

 

 

 

 

 

(178mm)

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

WALL HANGER

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

8-1/2"

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

12" (305mm) LONG

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

(216mm)

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

C

OF FAUCET

 

 

 

 

DRAIN

 

 

 

SINK

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

FITTING

 

 

 

BOWL

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

L

DRILLING

 

 

 

 

 

 

 

 

 

 

1-1/2"

 

6"

 

 

 

 

 

1-3/4" R

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

41-7/8"

(38mm)

 

(152mm)

(45mm)

 

 

 

1-1/4" (32mm) DIA.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

1 HOLE

 

 

 

 

 

 

 

 

 

 

 

 

PEDESTAL

 

(1064mm)

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

8-1/2"

 

RUBBER

 

 

 

 

 

 

TO C

 

5"

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

(216mm)

WASHER

C

 

 

PLUMBERS PUTTY

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

L

 

 

 

 

 

L

 

 

 

(127mm)

 

 

 

 

 

 

 

 

 

 

 

 

 

1-1/2" (38mm)

 

 

 

 

 

 

 

 

 

 

 

 

 

 

(BETWEEN SINK BOWL

OF HOLES

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

LOCKNUT

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

1-1/2" (38mm)

 

 

 

 

 

 

 

 

 

 

 

& DRAIN FLANGE)

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

36"

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

I.P.S. WASTE

 

 

 

 

 

5-3/4"

 

 

 

 

 

CARDBOARD SHIM

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

(914mm)

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

(BETWEEN WASHER

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

FLOOR TO RIM

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

(146mm)

 

 

 

 

& LOCKNUT)

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

8-11/16"

 

 

 

 

 

 

 

 

 

 

 

 

(4) 3/8" DIA. HOLES ARE

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

(221mm)

 

 

 

 

 

 

 

 

 

 

PROVIDED FOR ANCHORING

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

PEDESTAL TO FLOOR

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

(ANCHORS SUPPLIED BY OTHERS)

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

FINISHED FLOOR

 

 

 

 

In keeping with our policy of continuing product improvement, Elkay reserves the right to change

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

product specifications without notice.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Elkay

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

2222 Camden Court

 

 

 

 

 

 

 

 

 

 

 

Printed in U.S.A.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Oak Brook, IL 60523

 

 

 

 

 

 

 

 

 

 

 

©2003 Elkay

 

www.elkayusa.com

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

PART NO. 74180316

 

 

 

 

 

 

 

 

 

(10/03)

4-20

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Loading...
+ 1 hidden pages