HA-3
Handle Mount Kit
for Zx3 Series
Installation Instructions
HA-3 Handle Mounting Kit
The Electro-Voice HA-3 Handle Mounting Kit features a threaded attach point that allows for a Zx3 loudspeaker to be flown using a VSA-1 Strong-Arm (sold separately) to obtain desired orientation and sound coverage.
HA-3 |
VSA-1 |
TCA-1 |
Handle Mount |
Strong-Arm |
Truss Clamp |
|
|
Adaptor |
Step 1: Remove Handle Bolts and Handle Step 2: Attach HA-3 and Handle Bolts |
Step 3: Attach VSA-1 Strong-Arm Mount |
Fully Assembled with HA-3 Handle Mount and VSA-1 Strong-Arm Mount
WARNING: Suspending any object is potentially dangerous and should only be attempted by individuals who have a thorough knowledge of the
techniques and regulations of rigging objects overhead. Electro-Voice strongly recommends
that Zx3 speakers be suspended taking into account all current national, federal, state and local regulations. It is the responsibility of the installer to ensure that Zx3 speakers are safely installed in accordance with all such regulations. If Zx3 speakers are suspended, Electro-Voice strongly recommends that the system be inspected at least once a year. If any sign of weakness or damage is detected, remedial action should be taken immediately.
Electro-Voice
12000 Portland Avenue South, Burnsville, MN 55337 Phone: 952/884-4051, Fax: 952/884-0043
www.electrovoice.com
© Bosch Communications Systems |
11/2010 |
Part Number LIT000160 Rev B |
|
U.S.A. and Canada only. For customer orders, contact Customer Service at:
800/392-3497 Fax: 800/955-6831
Europe, Africa, and Middle East only. For customer orders, contact Customer Service at:
+ 49 9421-706 0 Fax: + 49 9421-706 265
Other Internatonal locations. For customer orders, Contact Customer Service at:
+ 1 952 884-4051 Fax: + 1 952 887-9212
For warranty repair or service information, contact the Service Repair department at:
800/685-2606
For technical assistance, contact Technical Support at: 866/78AUDIO
Specifications subject to change without notice.