Washer extractors
Features and benefits
• Clarus Control ® with:
– Fully programmable microprocessor
– All relevant wash parameters can be programmed
– Programming from key pad or downloading via memory card
• Large door opening for easy loading/unloading
• Super Balance, software ensure a quick distribution/extraction cycle
with low noise/vibration level
• Frequency controlled motor
• Prepared for manual or automatic detergent supply
• Stainless steel in all vital parts for high degree of rust protection
• Stainless steel front panels and powder painted side panels
• Non-heated or direct steam heating
• Electrical heating
PROFESSIONAL LAUNDRY
W4350X
Main options
• Stainless steel panels
• Coin-meter
Main specifications
Rated capacity, filling factor 1:10 kg/lb
Drum, volume litre/ft3
diameter ø mm/inch
Extraction max rpm
G-factor
Heating alternatives, electricity kW
steam
non-heated
Consumption data 3S03/3L33 Warm
Total time min
Water consumption (cold/hot) litre
gallon
Energy consumption (motor/heating) kWh
Steam consumption kg
* Water temperature 59°F cold water and 149°F hot water.
** Heating time depending on steam pressure.
Certified in accordance with ISO 9001 and ISO 14001 and approved IP 24D. Certified in accordance with UL/ETL standards.
El Steam
37 30 + **
309/27 309/27
81/7 81/7
0.35/2.6 0.35/-
- 4
W4350X
35/77
350/12.4
920 / 36 1/4
650
220
24.0
x
x