Favorit 65411 VI
User manual |
Dishwasher |
2 Contents
Thank you for choosing one of our high-quality products.
To ensure optimal and regular performance of your appliance please read this instruction manual carefully. It will enable you to navigate all processes perfectly and most efficiently. To refer to this manual any time you need to, we recommend you to keep it in a safe place. And please pass it to any future owner of the appliance.
We wish you much joy with your new appliance.
CONTENTS
OPERATING INSTRUCTIONS |
3 |
|
|
SAFETY INFORMATION |
3 |
|
|
Correct use |
3 |
General safety |
3 |
Child safety |
3 |
Installation |
4 |
PRODUCT DESCRIPTION |
6 |
|
|
CONTROL PANEL |
8 |
Digital display |
8 |
Delay start button |
9 |
Function buttons |
9 |
Setting mode |
9 |
Audible signals |
9 |
USE OF THE APPLIANCE |
10 |
|
|
SETTING THE WATER SOFTENER |
10 |
|
|
Manual adjustment |
11 |
Electronic adjustment |
11 |
USE OF DISHWASHER SALT |
12 |
USE OF RINSE AID |
12 |
|
|
Adjusting the rinse aid dosage |
13 |
LOADING CUTLERY AND DISHES |
14 |
Helpful hints and tips |
14 |
Lower basket |
14 |
Cutlery basket |
15 |
Upper basket |
16 |
Adjustment of the height of the upper |
|
basket |
16 |
USE OF DETERGENT |
17 |
MULTITAB FUNCTION |
18 |
|
|
To activate the multitab function: |
19 |
To activate/deactivate the rinse aid |
|
dispenser: |
19 |
SELECT AND START A WASHING PROGRAM |
19 |
|
|
Select and start a washing program with |
|
delay start |
20 |
Cancelling a delay start |
20 |
Interrupting a washing program |
20 |
Cancelling a washing program |
20 |
End of the washing program |
21 |
Removing the load |
21 |
Standby mode |
21 |
WASHING PROGRAMS |
23 |
|
|
CARE AND CLEANING |
26 |
Cleaning the filters |
26 |
External cleaning |
27 |
Internal cleaning |
27 |
Long periods of non-operation |
27 |
Frost precautions |
27 |
Moving the machine |
27 |
WHAT TO DO IF… |
28 |
TECHNICAL DATA |
29 |
|
|
INSTALLATION INSTRUCTIONS |
30 |
|
|
INSTALLATION |
30 |
|
|
Adjust the level of the appliance |
31 |
Adhesive steam protection foil |
31 |
Fixing to the adjacent units |
31 |
Custom made kick-panel |
32 |
WATER CONNECTION |
32 |
|
|
Water inlet hose |
32 |
Water drain hose |
33 |
ELECTRICAL CONNECTION |
34 |
|
|
ENVIRONMENT CONCERNS |
35 |
|
|
Old appliance |
35 |
WARRANTY |
35 |
|
|
Subject to change without notice
Safety information |
|
3 |
|
|
|
OPERATING INSTRUCTIONS
SAFETY INFORMATION
For your safety and correct operation of the appliance, read this manual carefully before installation and use. Always keep these instructions with the appliance even if you move or sell it. Users must fully know the operation and safety features of the appliance.
Correct use
•Only use the appliance to clean household utensils that are suitable for dishwashers.
•Do not put solvents in the appliance. Risk of explosion.
•Put the knives and all items with sharp points in the cutlery basket with their points down. If not, put them in a horizontal position in the upper basket.
•Use only products specified for dishwashers (detergent, salt, rinse aid).
•If you open the door while the appliance is in operation, hot steam can escape. Risk of skin burns.
•Do not remove dishes from the appliance before the end of the washing program.
•When the washing program is completed, disconnect the mains plug from the mains socket and close the water tap.
•Only an authorised service engineer can repair this appliance. Use only original spare parts.
•Do not do repairs yourself to prevent injury and damage to the appliance. Always contact the Customer Care Centre.
General safety
•Some dishwasher detergents are strongly alkaline. They can be extremely dangerous if swallowed. Avoid contact with skin and eyes. Keep the children away from the appliance when the door is open. Check that the detergent dispenser is empty after completion of the washing programme.
•Obey the safety instructions from the manufacturer of the dishwasher detergent to prevent burns to eyes, mouth and throat.
•Only put detergent in the dispenser before you start a washing program.
•Do not drink the water from the appliance. Detergent residues can stay in your appliance.
•Always close the door when you do not use the appliance to prevent injury and not to stumble over the open door.
•Do not sit or stand on the open door.
Child safety
•This appliance is not intended for use by young children or infirm persons unless they have been adequately supervised by a responsible person to ensure that they can use the appliance safely. Young children should be supervised to ensure that they do not play with the appliance.
•Keep all the packaging away from children. There is a risk of suffocation.
•Keep all detergents in a safe area. Do not let children touch the detergents.
•Keep children and pets away from the appliance when the door is open.
4 Safety information
Installation
•Make sure that the appliance is not damaged because of transport. Do not connect a damaged appliance. If necessary, contact the supplier.
•Remove all packaging before first use.
•A qualified and competent person must do the electrical installation.
•A qualified and competent person must do the plumbing installation.
•Do not change the specifications or modify this product. Risk of injury and damage to the appliance.
•Do not use the appliance:
–if the mains cable or the water hoses are damaged,
–if the control panel, worktop or plinth area are damaged so that you can get access to
the inner side of the appliance. Contact your local Customer Care Centre.
•Do not drill into the sides of the appliance otherwise damage to hydraulic and electrical components may occur.
WARNING!
Carefully obey the instructions for electrical and water connections.
Safety information |
|
5 |
|
|
|
6 Product description
PRODUCT DESCRIPTION
1Upper basket
2Water hardness dial
3Salt container
4Detergent dispenser
5Rinse aid dispenser
6Rating plate
7Filters
8Lower spray arm
9Upper spray arm
Light beam
After the start of the washing program, a light beam shows on the floor below the appliance door.
If the appliance is installed higher with a flush kitchen furniture door, the light beam will not be visible.
|
|
Light beam |
|
|
|
The red light is on. |
|
Indication of the start of a washing program. The red light stays on dur- |
|
|
ing the washing program. |
|
|
|
The red light flashes. |
|
Indication of a malfunction. |
|
|
|
The red light goes off. |
|
Indication of the end of a washing program. |
|
|
|
Product description |
|
7 |
|
|
|
8 Control panel
CONTROL PANEL
7 |
1On/off button
2Digital display
3Delay start button
4Program selection buttons
5Indicator lights
6Program indicator lights
7Function buttons
|
Indicator lights |
||
|
|
|
|
MULTITAB |
|
|
The indicator light shows the activation/deacti- |
|
|
|
vation of the multitab function. Refer to 'Multi- |
|
|
|
tab function'. |
1) |
|
|
The indicator light comes on when it is necessa- |
|
|
|
ry to fill the salt container. Refer to 'Use of dish- |
|
|
|
washer salt'. |
|
|
|
The salt indicator light can stay on for some |
|
|
|
hours, but it does not have an unwanted effect |
|
|
|
on the operation of the appliance. |
|
|
|
|
1) |
|
|
The indicator light comes on when it is necessa- |
|
|
|
ry to fill the rinse aid container. Refer to 'Use of |
|
|
|
rinse aid'. |
|
|
|
|
1) The indicator light is off while a washing programme operates.
Digital display
The display shows:
•adjusted level of the water softener,
•activation/deactivation of the rinse aid dispenser (only with multitab function on),
Control panel |
|
9 |
|
|
|
•program duration,
•remaining time to the end of the program,
•end of a washing program,
•number of hours in delay start,
•fault codes,
•deactivation/activation of the audible signals.
Delay start button
Use the delay start button to delay the start of the washing program with an interval between 1 and 19 hours. Refer to 'Select and start a washing program'.
Function buttons
Use the function buttons for these operations:
•to set the water softener. Refer to 'Setting the water softener'.
•to deactivate/activate the audible signals. Refer to 'Deactivation/activation of the audible signals'.
•to activate/deactivate the multitab function. Refer to 'Multitab function'.
•to deactivate/activate the rinse aid dispenser when multitab function is active. Refer to 'Multitab function'.
•to cancel the washing program in progress or a delay start in progress. Refer to 'Select and start a washing program'.
Setting mode
The appliance must be in setting mode for these operations:
•To set a washing program.
•To set the water softener level.
•To deactivate/activate the audible signals.
•To deactivate/activate the rinse aid dispenser.
Press the on/off button. The appliance is in setting mode when:
– All the program indicator lights are on.
Press the on/off button. The appliance is not in setting mode when:
–Only one program indicator light is on.
–A washing program is set. It is necessary to cancel the program to go back to the setting mode. Refer to "Select and start a washing program".
Audible signals
You can hear an audible signal:
•at the end of the washing program,
•during the setting of the level of the water softener,
•when the appliance has a malfunction.
The activation of the audible signals is set at the factory.
Do these steps to deactivate the audible signals:
1.Switch on the appliance.
2.Make sure that the appliance is in setting mode.
3.Press and hold function buttons B and C until the indicator lights of function buttons A, B and C start to flash.
4.Press the function button C.
10Use of the appliance
–Indicator lights for function buttons A and B go off.
–Indicator light for function button C flashes.
–The digital display shows the setting.
Audible signals deactivated
Audible signals activated
The audible signals are activated.
5.Press the function button C again.
–The digital display shows the new setting. The audible signals are deactivated.
6.Switch off the appliance to save the operation. Do these steps to activate the audible signals:
1. Do the above procedure until the digital display shows necessary setting.
USE OF THE APPLIANCE
Refer to specified instructions for each step of the procedure.
1.Check if the water softener level is correct for the water hardness in your area. If necessary set the water softener.
2.Fill the salt container with dishwasher salt.
3.Fill the rinse aid dispenser with rinse aid.
4.Load cutlery and dishes into the dishwasher.
5.Set the correct washing program for the type of load and soil.
6.Fill the detergent dispenser with the correct quantity of detergent.
7.Start the washing program.
SETTING THE WATER SOFTENER
The water softener removes minerals and salts from the water supply. Minerals and salts can have bad effect on the operation of the appliance.
Water hardness is measured in equivalent scales:
•mg/I (millimol per litre)
•ppm (parts per million),
•mmol/l (millimol per litre - international unit for the hardness of water).
Adjust the water softener in to the water hardness in your area. If necessary, contact your local water authority.
|
|
Water hardness |
|
|
Water hardness setting |
|
|
|
|
|
|
|
|
mg/l |
|
ppm |
mmol/l |
|
manually |
electronically |
910 - 1250 |
|
910 - 1250 |
9,1 - 12,5 |
|
2 |
10 |
|
|
|
|
|
||
760 - 909 |
|
760 - 909 |
7,6 - 9,0 |
|
2 |
9 |
|
|
|
|
|
||
650 - 759 |
|
650 - 759 |
6,5 - 7,5 |
|
2 |
8 |
|
|
|
|
|
||
510 - 649 |
|
510 - 649 |
5,1 - 6,4 |
|
2 |
7 |
|
|
|
|
|
|
|
|
|
|
|
|
|
Setting the water softener |
|
|
|
|
|
|
|
|
|
|
11 |
||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Water hardness |
|
|
Water hardness setting |
|
||
|
|
|
|
|
|
|
|
|
|
|
mg/l |
|
ppm |
mmol/l |
|
manually |
electronically |
|
|
|
400 - 509 |
|
400 - 509 |
4,0 - 5,0 |
|
2 |
6 |
|
|
|
|
|
|
|
|
|
|
||
|
330 - 399 |
|
330 - 399 |
3,3 - 3,9 |
|
2 |
5 |
|
|
|
|
|
|
|
|
|
|
||
|
260 - 329 |
|
260 - 329 |
2,6 - 3,2 |
|
1 |
4 |
|
|
|
|
|
|
|
|
|
|
||
|
190 - 259 |
|
190 - 259 |
1,9 - 2,5 |
|
1 |
3 |
|
|
|
|
|
|
|
|
|
|
||
|
70 - 189 |
|
70 - 189 |
0,7 - 1,8 |
|
1 |
2 |
|
|
|
|
|
|
|
|
|
|
||
|
< 70 |
|
< 70 |
< 0,7 |
|
1 |
11) |
|
|
1) No use of salt required.
You must set the water softener manually and electronically.
Manual adjustment
The appliance is set at the factory at position 2.
1. Open the door.
2. Remove the lower basket.
3. Turn the water hardness dial to position 1 or 2 (refer to the chart).
4. Install the lower basket.
5. Close the door.
Electronic adjustment
The dishwasher is factory set at level 5.
1.Switch on the appliance.
2.Make sure that the appliance is in setting mode.
3.Press and hold function buttons B and C until the indicator lights of function buttons A, B and C start to flash.
4.Release function buttons B and C.
5.Press function button A.
–The indicator lights for function buttons B and C go off.
–The indicator light for function button A continues to flash.
–The digital display shows the current level.
–You can hear an audible signal.
|
Example: digital display shows |
/ 5 intermittent audible signals = level 5. |
6. |
Press the function button A one time to increase the water softener level by one step. |
|
7. |
Continue pressing function button A until the desired water softener level is achieved. |
|
8. |
Press the on/off button to save the operation. |
12 Use of dishwasher salt
USE OF DISHWASHER SALT
CAUTION!
Only use dishwasher salt. Types of salt that are not suitable for dishwashers cause damage to the water softener.
CAUTION!
Grains of salt and salty water on the bottom of the appliance can cause corrosion. Fill the appliance with salt before you start a washing program to prevent corrosion.
Do these steps to fill the salt container:
1.Turn the cap anticlockwise to open the salt container.
2.Fill the salt container with 1 litre of water (only the first operation).
3. Use the funnel to fill the salt container with salt.
4.Remove the salt around the opening of the salt container.
5.Turn the cap clockwise to close the salt container.
It is normal that water overflows from the salt container when you fill it with salt.
USE OF RINSE AID
CAUTION!
Only use rinse aid specified for dishwashers.
Do not fill the rinse aid dispenser with other products (e.g. dishwasher cleaning agent, liquid detergent). This can cause damage to the appliance.
Rinse aid makes it possible to dry the dishes without streaks and stains.
Rinse aid is automatically added during the last rinsing phase.
Follow these steps to fill the rinse aid dispenser: