Installation 5
Installing the Wine Cooler
Your Electrolux wine cooler has been designed for either free-standing or built-in installation. When builtin, your wine cooler does not require additional air space for top, sides or rear. In either case, the front grille must NOT be obstructed.
NOTE
To ease unit installation and removal, it is recommended that the cabinet rough opening dimensions be increased by at least ΒΌ inch over the dimensions given for your unit.
NOTE
All units require zero clearance when installed flush with a cabinet or wall. Electrolux ICON Designer stainless steel models require a minimum 2 1/16 inch handle clearance when installed against a wall or cabinet that extends beyond the front edge of the unit.
ICON Designer Unit Dimensions |
||
Width |
Height |
Depth |
23 13/16 inch |
34-35 inches |
25 7/8 inch |
ICON Designer Product Dimensions