Item
Model
ProjectName
MMR
This Dito Electrolux Professional range of power drive units consists of 4 table top models with attachments available for the processing of food such as meat, vegetables, cheese, bread etc.
600200
FEATURES
V The main body of the motor gear unit is fitted onto a revolving base so that the attachments can be used in different positions. Constructed in 304 AISI stainless steel.
V Closed type motor, self-ventilated, equipped with thermal cut-out device against overloading.
V Motor unit with special steel helical gears operating in a crankcase with oil additives.
V The motor gear units are on a 304 AISI stainless steel support with rubber feet.
V Two rotation speeds, controlled by a switch that is also the ON/OFF switch.
V All units function on three phrase electrical supply and are not convertible to single phase.
V Cone attachment for rapid insertion of the
interchangeable attachments with a locking device and safety microswitch.
V The following attachments and accessories are available:
Meat Mincer - body in aluminium alloy; scroll in anodized aluminium alloy mounted on self-lubricating bearings; stainless steel conveyor hopper;
Graters - roller in 304 AISI stainless steel rotating in self-lubricating bearings;
Squeezer - body in anodized inoxal; stainless steel conveyor hopper; filter with 2 mm holes; nylon pestle suitable for use with food;
Masher - body in anodized inoxal; sieve in stainless steel with 2.5 mm holes; white polythene pestle for use with food;
Power drive units
Vegetable Cutter - body in anodized inoxal; self lubricating bearings for supporting the discs;
Meat Tenderizer - body in anodized inoxal; two rolls of strainer with stainless steel serrated blade;
Salt Grinder - body in anodized inoxal; special hard-wearing mill; aluminium loading hopper; device for the continuous control of the fineness of the grind; Pasta Roller - body in anodized inoxal; chromed steel roller mounted on a self-lubricating bearings; device for continuous control of the thickness of the pasta strips;
Coffee Grinder - body in anodized inoxal; special hard-wearing mill; aluminium loading hopper; device for the continuous control of the fineness of the grind; Mixer - bowl in 18/8 stainless steel; whisk and holder in stainless steel; support in anodized inoxal; device for the continuous alteration of the angle of the whisk depending on the amount of product to be mixed;
Pasta Cutter - body in anodized inoxal; roller in 304 AISI stainless steel mounted on a self-lubricating bearings;
Specifications
MODEL |
MMR104 |
MMR224 |
MMR222 |
MMR324 |
|
|
|||||
600200 |
600202 |
600203 |
600204 |
|
|
|
|
|
|
|
|
External dimensions - mm |
|
|
|
|
|
width |
370 |
370 |
370 |
370 |
|
depth |
260 |
260 |
260 |
260 |
|
height |
410 |
410 |
410 |
410 |
|
Power - kW |
|
|
|
|
|
total power |
0.75 |
1.1 |
1.1 |
2.2 |
|
Electrical power - kW |
0.75 |
1.1 |
1.1 |
2.2 |
|
Net weight - kg. |
26 |
29 |
29 |
32 |
|
Supply voltage |
400 V, 3, 50 |
400 V, 3, 50 |
230 V, 3, 50 |
400 V, 3, 50 |