|
|
|
|
ITEM # _______________________________________________ |
|
|
|
|
|
|
MODEL # _____________________________________________ |
|
|
|
|
Warewashing |
|
PROJECT NAME # ______________________________________ |
|
|
|
66″ Single Tank Conveyor Dishwasher |
|
SIS # _________________________________________________ |
|
||
|
w/o Built In Hot Water Booster WT66 |
|
AIA # _________________________________________________ |
|
||
|
|
|
|
|
||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Main features |
|
|
|
|
|
|
|
||
|
|
|
|
• |
Built in rinse booster pump guarantees constant rinse pressure. |
|
|
|
|
|
• |
Speed of conveyor can be set through the control panel by the |
|
|
|
|
|
|
operator. 130 racks/hr or 200 racks/hr. |
|
|
|
|
|
• |
Large counter balanced inspection doors in pre wash and wash/ |
|
|
|
|
|
|
rinse sections allow unrestricted all round access to the wash and |
|
|
|
|
|
|
rinse area. Door is insulated with injected foam. This adds strength |
|
|
|
|
|
|
as well as reduces noise and heat loss. |
|
|
|
|
|
• Large filters sloping towards the front to the smaller pressed filter box for |
|
|
|
|
|
|
|
quick removal. Filters feature holes smaller than the concave ant-block |
|
|
|
|
|
|
wash nozzles so large food cannot enter and block the wash system. |
|
|
|
|
|
|
Filters easy to remove from pre wash as well as wash/rinse sections. |
|
|
|
|
|
• |
Adjustable feet for full access underneath the machine for cleaning. |
|
|
|
|
|
• |
Push button self cleaning cycle of the wash and rinse zones for ease |
|
|
|
|
|
|
of “end of day” cleaning. |
|
|
|
|
|
• Wash chamber without internal pipes and therefore no hidden dirt traps. |
|
|
|
|
|
|
• |
Pre wash chamber without internal pipes and therefore no hidden |
|
|
Warewashing |
|
|
|
dirt traps. |
|
|
|
|
• Self draining wash pumps provide maximum hygiene with no smells and |
|
||
|
66″ Single Tank Conveyor Dishwasher |
|
|
|||
|
|
|
all wash and rinse zones drain automatically at the push of a button. |
|
||
|
without Built In Hot Water Booster WT66 |
|
|
|
||
|
|
• |
Powerful 0.5 HP pre-wash pump. |
|
||
|
534094 (WT66CL208) |
66″ Conveyor Dishwasher without |
|
• |
Powerful 2 HP wash pump. |
|
|
534095 (WT66CR208) |
Built in Booster. Left to Right - 208V |
|
• |
Heavy duty stainless steel wash pump (impeller and housing). |
|
|
66″ Conveyor Dishwasher without |
|
• |
Pre wash section uses cold water so food remains are not “baked” |
|
|
|
|
Built in Booster. Right to Left - 208V |
|
|
||
|
|
|
|
onto the plates. |
|
|
|
534096 (WT66CL240) |
66″ Conveyor Dishwasher without |
|
|
|
|
|
|
• |
Deep drawn pressed 26 gal wash tank with fully rounded corners, |
|
||
|
|
Built in Booster. Left to Right - 240V |
|
|
||
|
|
|
|
sloped towards the drain to prevent dirt build up provides fast |
|
|
|
534097 (WT66CR240) |
66″ Conveyor Dishwasher without |
|
|
|
|
|
|
|
drainage in only a few minutes. Pressed wash tank with no welded |
|
||
|
|
Built in Booster. Right to Left - 240V |
|
|
|
|
|
|
|
|
points offer a guaranteed water tight solution. |
|
|
|
|
|
|
|
|
|
|
|
|
|
• Deep drawn pressed 11.8 gal pre wash tank with fully rounded corners. |
|
|
|
|
|
|
|||
|
Short Form Specification |
|
• |
Dishwasher structure is held together with a solid 2″ × 2″ stainless |
|
|
|
|
|
|
|
steel tube sub-frame to provide long term sturdiness. |
|
|
|
|
|
• |
All main components made in heavy duty anti-corrosive 304 type |
|
|
|
|
|
|||
|
Item No. ___________________________________ |
|
|
stainless steel: tanks, panels, pre wash, wash & rinse arms and |
|
|
|
Unit to be Electrolux WT66 Hot Water Sanitizing 66″ single tank |
|
|
caps, doors, front, handle, rear and side-panels and rack |
|
|
|
|
|
transportation system. |
|
||
|
conveyor dishwasher without built in hot water booster. Electrical |
|
|
|
||
|
|
• |
Pre wash, wash and rinse arms can be easily removed for cleaning. |
|
||
|
characteristics to be ____ 208 V or ____ 240 V three phase operation. |
|
|
|||
|
Unit to operate from ___ left to right or ____ right to left. Unit to feature |
|
• |
IPX5 (NEMA4) water protection ensures no damage from cleaning. |
|
|
|
built in rinse booster pump thus guaranteeing rinse pressure during rinse |
|
• |
Autostart/stop ensures that the machine runs only when a rack is passing |
|
|
|
cycle. Unit to include 22″ pre wash zone. Pre-wash zone with powerful |
|
|
|||
|
|
|
through it. This reduces both water and energy consumption. |
|
||
|
0.5 HP cold water pre wash. Unit to have two conveyor speeds which can |
|
|
|
||
|
|
• |
Internal curtains made of silastic material and are not affected by |
|
||
|
be selected from the control panel by the operator, 130 racks/hour or |
|
|
|||
|
200 racks/hour. Maximum water consumption at 200 racks/hour of only |
|
|
detergent or heat. |
|
|
|
83 gal/hour (0.4 gal/rack). Unit to feature large heat and noise insulated |
|
• |
Electronic control panel features large display for reading of wash |
|
|
|
front counter balanced door in pre-wash and wash/rinse sections for |
|
|
|||
|
|
|
and rinse temperatures. |
|
||
|
easy access of internal components. Powerful 2 HP wash pump and |
|
|
|
||
|
|
• |
Low water consumption. At 200 racks per hour, the machine uses |
|
||
|
specially designed wash spray arms to guarantee cleaning. Unit to |
|
|
|||
|
feature as standard end of day self cleaning cycle. Drain of water from |
|
|
only 83 gal/hr (0.4 gal/rack). |
|
|
|
the machine can be done through the control panel. Large deep drawn |
|
• |
Machine predisposed for external detergent and rinse aid connections. |
|
|
|
26 gal wash tank for extended wash sessions. |
|
Included Accessories |
|
||
|
Covered by Electrolux Platinum Star® Service Program two-year parts |
|
|
|||
|
|
|
|
|
||
|
and one-year labor warranty, installation start-up and performance check- |
|
• |
Vent cowls (left and right side). |
|
|
|
up after one year from installation. |
|
• |
One open sided dishwasher rack for trays. |
|
|
|
|
|
|
|
||
|
|
|
|
• |
Rack for cups. |
|
|
|
|
|
|
||
|
|
|
|
• |
Rack for dinner plates. |
|
|
|
|
|
Optional Accessories |
|
|
|
|
3048424 |
|
• |
Ventilation activation kit. |
|
|
|
|
|
|
||
Approval: ___________________________________________ |
|
• |
Drain water tempering kit. |
|
||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Electrolux Professional, Inc. www.electroluxusa.com/professional
3225 SW 42nd Street, Fort Lauderdale, Florida, 33312 • Telephone Number: 866-449-4200 • Fax Number: 954-327-6789
uiltB
without Dishwasher Conveyor Tank Single ″66
Warewashing
Warewashing 66″ Single Tank Conveyor Dishwasher without Built In Hot Water Booster WT66
Electric
Supply voltage: |
534094 (WT66CL208) |
208 V/3p/60Hz |
|
534095 (WT66CR208) |
208 V/3p/60Hz |
|
534096 (WT66CL240) |
240 V/3p/60Hz |
|
534097 (WT66CR240) |
240 V/3p/60Hz |
Machine requires one electrical connection. |
|
|
Max. Current absorbed: |
208 V/3p/60Hz |
64A (21 kW) |
|
240 V/3p/60Hz |
57.5A (21 kW) |
Water
Inlet Water supply pressure: |
22 – 102 psi (150 – 700 kPa) |
Inlet Cold Water Supply Temperature |
|
for Pre Wash Tank: |
39-59 °F (4-15 °C) |
Inlet Water Supply Temperature |
|
Rinse circuit: |
194 °F (90 °C) |
Wash tank: |
80 – 140 °F (27 – 60 °C) |
Inlet Water supply hardness: |
4 – 8 gpg (7-14 °fH) max |
Incoming Cold Water line size |
G 3/4″ |
Pre wash: |
|
Incoming Hot Water line size |
G 3/4″ |
Wash tank: |
|
Rinse circuit: |
G 3/4″ |
Drain line size |
G 1-1/2″ |
Pre wash section: |
|
Wash/rinse section: |
G 1-1/2″ |
Water consumption: Gallons/hr: |
83.2 gal/hr (315 liters) |
Water consumption/rack: |
0.4 gal/rack (1.5 l/rack) |
Pre wash temperature: |
< 105 °F (<40 °C) |
Pre wash tank size: |
11.8 gal (45 liters) |
Pre wash pump power: |
0.5 hp (0,37 kW) |
Pre wash pump water flow: |
39 gal/min (150 l/min) |
Wash temperature: |
160 – 172 °F (71-78 °C) |
Wash tank size: |
26 gal (100 liters) |
Wash pump power: |
2 hp (1.5kW) |
Wash pump flow rate: |
118.9 gal/min (450 l/min) |
Rinse temperature: |
180 – 194 °F (82-90 °C) |
Rinse pump power: |
0.4 hp (0.32 kW) |
Rinse pump water flow: |
1.32 gal/min (5 l/min) |
Initial fill Hot Water requirements: |
26 gal (100 liters) |
Initial fill Cold Water requirements: |
11.8 gal (45 liters) |
Key Information
Productivity racks per hour |
200 racks / 3600 dishes |
(max speed): |
(average 18 dishes per rack) |
Productivity racks per hour |
130 racks / 2340 dishes |
(min speed): |
(average 18 dishes per rack) |
Table to Table connection: |
66″ (1676 mm) |
Number of Tanks: |
1 |
Height with door open: |
83-7/16″ (2119 mm) |
Charging hole size (width): |
20-7/8″ (530 mm) |
Charging hole size (height): |
19-3/4″ (501 mm) |
Net weight: |
1012 lb (459 kg) |
Shipping weight: |
1210 lb (549 kg) |
Shipping width: |
74-7/16″ (1890 mm) |
Shipping depth: |
40-15/16″ (1040 mm) |
Shipping height: |
81-1/8″ (2060 mm) |
Shipping volume: |
143 cu.ft (4.05 m3) |
Noise level: |
<70 dBA |
Unit predisposed to accept external detergent dispensers, detergent probes and rinse aid dispensers.
Exhaust Requirements
Unit supplied as standard with extended vent hoods (can be removed during installation if not required). Exhaust extraction not more than 177 CFM (300 m³/h) Refer to installation diagram for minimum exhaust hood installation height .
Loading...