|
|
|
ITEM # _______________________________________________ |
|
|
|
|
MODEL # _____________________________________________ |
|
|
Warewashing |
PROJECT NAME # ______________________________________ |
||
44″ Single Tank Conveyor Dishwasher |
SIS # _________________________________________________ |
|||
w/o Built In Hot Water Booster WT44 |
AIA # _________________________________________________ |
|||
|
|
|
||
|
|
|
|
|
|
|
|
|
|
|
|
|
Main features |
|
|
|
|
||
|
|
|
• |
Built in rinse booster pump guarantees constant rinse pressure. |
|
|
|
• |
Speed of conveyor can be set through the control panel by the |
|
|
|
|
operator. 130 racks/hr or 200 racks/hr. |
|
|
|
• |
Large counter balanced inspection doors allow unrestricted all |
|
|
|
|
round access to the wash and rinse area. Door is insulated with |
|
|
|
|
injected foam. This adds strength as well as reduces noise and heat |
|
|
|
|
loss. |
|
|
|
• |
Large filters sloping towards the front to the smaller pressed filter |
|
|
|
|
box for quick removal. Filters feature holes smaller than the concave |
|
|
|
|
ant-block wash nozzles so large food cannot enter and block the |
|
|
|
|
wash system. |
|
|
|
• |
Adjustable feet for full access underneath the machine for cleaning. |
|
|
|
• |
Push button self cleaning cycle of the wash and rinse zones for ease |
|
|
|
|
of “end of day” cleaning. |
|
|
|
• |
Wash chamber without internal pipes and therefore no hidden dirt |
|
|
|
|
traps. |
Warewashing |
|
|
• |
Self draining wash pumps provide maximum hygiene with no smells |
44″ Single Tank Conveyor Dishwasher |
|
|
and all wash and rinse zones drain automatically at the push of a |
|
without Built In Hot Water Booster WT44 |
|
|
button. |
|
|
• |
Powerful 2 HP wash pump. |
||
|
|
|
||
534074 (WT44CL208) |
44″ Conveyor Dishwasher without |
|
• |
Heavy duty stainless steel wash pump (impeller and housing). |
|
Built in Booster. Left to Right - 208V |
|
• |
Deep drawn pressed 26 gal wash tank with fully rounded corners, |
534075 (WT44CR208) |
44″ Conveyor Dishwasher without |
|
|
sloped towards the drain to prevent dirt build up provides fast |
|
Built in Booster. Right to Left - 208V |
|
|
drainage in only a few minutes. Pressed wash tank with no welded |
534076 (WT44CL240) |
44″ Conveyor Dishwasher without |
|
|
points offer a guaranteed water tight solution. |
|
Built in Booster. Left to Right - 240V |
|
• |
Dishwasher structure is held together with a solid 2″ × 2″ stainless |
534077 (WT44CR240) |
44″ Conveyor Dishwasher without |
|
|
steel tube sub-frame to provide long term sturdiness. |
|
Built in Booster. Right to Left - 240V |
|
• |
All main components made in heavy duty anti-corrosive 304 type |
|
|
|
||
|
|
|
|
stainless steel: tanks, panels, wash & rinse arms and caps, doors, |
|
|
|
|
|
Short Form Specification |
|
|
front, handle, rear and side-panels and rack transportation system. |
|
|
• |
Wash and rinse arms can be easily removed for cleaning. |
||
|
|
|
||
|
|
|
• |
IPX5 (NEMA4) water protection ensures no damage from cleaning. |
Item No. ___________________________________ |
|
|||
|
• |
Autostart/stop ensures that the machine runs only when a rack is |
||
Unit to be Electrolux WT44 Hot Water Sanitizing 44″ conveyor dish- |
|
|
passing through it. This reduces both water and energy |
|
|
|
consumption. |
||
washer without built in hot water booster. Electrical characteristics to be |
|
|
||
____ 208 V or ____ 240 V three phase operation. Unit to operate from |
|
• |
Internal curtains made of silastic material and are not affected by |
|
___ left to right or ____ right to left. Unit to feature built in rinse booster |
|
|
detergent or heat. |
|
pump thus guaranteeing rinse pressure during rinse cycle. Unit to have |
|
• |
Electronic control panel features large display for reading of wash |
|
two conveyor speeds which can be selected from the control panel by |
|
|||
the operator, 130 racks/hour or a maximum 200 racks/hour. Maximum |
|
|
and rinse temperatures. |
|
water consumption at 200 racks/hour of only 79 gal/hour (0.4 gal/rack). |
|
• |
Low water consumption. At 200 racks per hour, the machine uses |
|
Unit to feature large heat and noise insulated front counter balanced |
|
|
only 79 gal/hr (0.4 gal/rack). |
|
door for easy access of internal components. Powerful 2 HP wash pump |
|
|
||
|
• |
Machine predisposed for external detergent and rinse aid |
||
and specially designed wash spray arms guaranteed cleaning. Unit to |
|
|||
feature as standard end of day self cleaning cycle. Drain of water from |
|
|
connections. |
|
the machine can be done through the control panel. Large deep drawn |
|
Included Accessories |
||
26 gal wash tank. |
|
|
||
|
|
|
|
|
Covered by Electrolux Platinum Star® Service Program two-year parts |
|
• |
Vent cowls (left and right side). |
|
and one-year labor warranty, installation start-up and performance check- |
|
• |
One open sided dishwasher rack for trays. |
|
up after one year from installation. |
|
• |
Rack for cups. |
|
|
|
|
||
|
|
|
• |
Rack for dinner plates. |
|
|
|
||
Optional Accessories
• Ventilation activation kit.
• Drain water tempering kit.
3048424
Approval: ___________________________________________
Electrolux Professional, Inc. www.electroluxusa.com/professional
3225 SW 42nd Street, Fort Lauderdale, Florida, 33312 • Telephone Number: 866-449-4200 • Fax Number: 954-327-6789
uiltB
without Dishwasher Conveyor Tank Single ″44
WT44 |
Warewashing |
Warewashing 44″ Single Tank Conveyor Dishwasher without Built In Hot Water Booster WT44
Electric
Supply voltage: |
534074 (WT44CL208) |
208 V/3p/60Hz |
|
534075 (WT44CR208) |
208 V/3p/60Hz |
|
534076 (WT44CL240) |
240 V/3p/60Hz |
|
534077 (WT44CR240) |
240 V/3p/60Hz |
Machine requires one electrical connection. |
|
|
Max. Current absorbed: |
208 V/3p/60Hz |
61.7A (20.7 kW) |
|
240 V/3p/60Hz |
55A (20.7 kW) |
Water
Inlet Water supply pressure: |
22 – 102 psi (150 – 700 kPa) |
Inlet Water supply temperature |
|
Rinse circuit: |
194 °F (90 °C) |
Wash tank: |
80 – 140 °F (27 – 60 °C) |
Inlet Water supply hardness: |
4 – 8 gpg (7-14 °fH) max |
Incoming water line size: |
G 3/4″ |
Wash tank: |
|
Rinse circuit: |
G 3/4″ |
Drain line size: |
1-1/2″ |
Water consumption: Gallons/hr: |
79.25 gal/hr (300 liters) |
Water consumption/rack: |
0.4 gal/rack (1.5 l/rack) |
Wash Temperature: |
160 – 172 °F (71-78 °C) |
Wash tank size: |
26 gal (100 liters) |
Wash pump power: |
2 hp (1.5 kW) |
Rinse Temperature: |
180 – 194 °F (82-90 °C) |
Rinse pump power: |
0.4 hp (0.32 kW) |
Rinse pump water flow: |
1.32 gal/min (5 l/min) |
Initial fill water requirements: |
26 gal (100 liters) |
Key Information
Productivity racks per hour |
200 racks / 3600 dishes |
(max speed): |
(average 18 dishes per rack) |
Productivity racks per hour |
130 racks / 2340 dishes |
(min speed): |
(average 18 dishes per rack) |
Table to Table connection: |
44″ (1118 mm) |
Number of Tanks: |
1 |
Height with door open: |
83-7/16″ (2119 mm) |
Charging hole size (width): |
20-7/8″ (530 mm) |
Charging hole size (height): |
19-3/4″ (501 mm) |
Net weight: |
1012 lb (459 kg) |
Shipping weight: |
1210 lb (549 kg) |
Shipping width: |
74-7/16″ (1890 mm) |
Shipping depth: |
40-15/16″ (1040 mm) |
Shipping height: |
81-1/8″ (2060 mm) |
Shipping volume: |
143 cu.ft (4.05 m3) |
Noise level: |
<70 dBA |
Unit predisposed to accept external detergent dispensers, detergent probes and rinse aid dispensers.
Exhaust Requirements
Unit supplied as standard with extended vent hoods (can be removed during installation if not required). Exhaust extraction not more than 177 CFM (300 m³/h) Refer to installation diagram for minimum exhaust hood installation height .
Loading...