|
|
|
ITEM # _______________________________________________ |
||
|
|
|
MODEL # _____________________________________________ |
||
|
Warewashing |
|
PROJECT NAME # ______________________________________ |
||
|
44″ Single Tank Conveyor Dishwasher |
|
SIS # _________________________________________________ |
||
|
with Built In Hot Water Booster WT44 |
|
AIA # _________________________________________________ |
||
|
|
|
|||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Main features |
||
|
|
|
|||
|
|
|
• |
Built in hot water booster (top mounted). |
|
|
|
|
• |
Water booster temperature rise can be set on site during the |
|
|
|
|
|
installation of the machine. 40 °F rise (140 °F incoming water |
|
|
|
|
|
temperature), 70 °F rise (110 °F incoming water temperature) or |
|
|
|
|
|
100 °F rise (80 °F incoming water temperature). |
|
|
|
|
• |
Atmospheric booster system with air break. |
|
|
|
|
• |
Built in rinse hot water booster pump guarantees constant rinse |
|
|
|
|
|
pressure. |
|
|
|
|
• |
Speed of conveyor can be set through the control panel by the |
|
|
|
|
|
operator. 130 racks/hr or 200 racks/hr. |
|
|
|
|
• |
Large counter balanced inspection doors allow unrestricted all round |
|
|
|
|
|
access to the wash and rinse area. Door is insulated with injected |
|
|
|
|
|
foam. This adds strength as well as reduces noise and heat loss. |
|
|
Warewashing |
|
• Large filters sloping towards the front to the smaller pressed filter box for |
||
|
|
|
quick removal. Filters feature holes smaller than the concave ant-block |
||
|
44″ Single Tank Conveyor Dishwasher |
|
|
wash nozzles so large food cannot enter and block the wash system. |
|
|
with Built In Hot Water Booster WT44 |
|
• |
Adjustable feet for full access underneath the machine for cleaning. |
|
|
534070 (WT44BL208) 44″ Conveyor Dishwasher with |
|
• |
Push button self cleaning cycle of the wash and rinse zones for ease |
|
|
|
|
of “end of day” cleaning. |
||
|
Built in Booster. Left to Right - 208V |
|
|
||
|
|
• Wash chamber without internal pipes and therefore no hidden dirt traps. |
|||
|
534071 (WT44BR208) 44″ Conveyor Dishwasher with |
|
|||
|
|
• |
Self draining wash pumps provide maximum hygiene with no smells and |
||
|
Built in Booster. Right to Left - 208V |
|
|||
|
534072 (WT44BL240) 44″ Conveyor Dishwasher with |
|
|
all wash and rinse zones drain automatically at the push of a button. |
|
|
Built in Booster. Left to Right - 240V |
|
• |
Powerful 2 HP wash pump. |
|
|
534073 (WT44BR240) 44″ Conveyor Dishwasher with |
|
• |
Heavy duty stainless steel wash pump (impeller and housing). |
|
|
Built in Booster. Right to Left - 240V |
|
• |
Deep drawn pressed 26 gal wash tank with fully rounded corners, |
|
|
|
|
|||
|
|
|
|
sloped towards the drain to prevent dirt build up provides fast |
|
|
|
|
|
||
|
Short Form Specification |
|
|
drainage in only a few minutes. Pressed wash tank with no welded |
|
|
|
|
points offer a guaranteed water tight solution. |
||
|
|
|
• Dishwasher structure is held together with a solid 2″ × 2″ stainless |
||
|
|
||||
|
Item No. ___________________________________ |
|
|
steel tube sub-frame to provide long term sturdiness. |
|
|
Unit to be Electrolux WT44 Hot Water Sanitizing 44″ single tank |
|
• |
All main components made in heavy duty anti-corrosive 304 type |
|
|
|
|
stainless steel: tanks, panels, wash & rinse arms and caps, doors, |
||
|
conveyor dishwasher with built in hot water booster. Electrical character- |
|
|
||
|
|
|
front, handle, rear and side-panels and rack transportation system. |
||
|
istics to be ____ 208 V or ____ 240 V three phase operation. Unit |
|
|
||
|
to operate from ___ left to right or ____ right to left. Unit to feature |
|
• |
Wash and rinse arms can be easily removed for cleaning. |
|
|
atmospheric built in booster system with built in rinse booster pump thus |
|
• |
IPX5 (NEMA4) water protection ensures no damage from cleaning. |
|
|
guaranteeing rinse pressure during rinse cycle. Hot water booster |
|
|||
|
|
• |
Autostart/stop ensures that the machine runs only when a rack |
||
|
temperature rise can be selected during installation from three options, |
|
|||
|
40 °F rise (140 °F incoming water temperature), 70 °F rise (110 °F |
|
|
is passing through it. This reduces both water and energy |
|
|
incoming water temperature) or 100 °F rise (80 °F incoming water |
|
|
consumption. |
|
|
temperature). Unit to have two conveyor speeds which can be selected |
|
• Internal curtains made of silastic material and are not affected by |
||
|
from the control panel by the operator, 130 racks/hour or 200 racks/hour. |
|
|||
|
|
|
detergent or heat. |
||
|
Maximum water consumption at 200 racks/hour of only 79 gal/hour |
|
|
||
|
(0.4 gal/rack). Unit to feature large heat and noise insulated front counter |
|
• |
Electronic control panel features large display for reading of wash |
|
|
balanced door for easy access of internal components. Powerful 2 HP |
|
|
and rinse temperatures. |
|
|
wash pump and specially designed wash spray arms to guarantee |
|
• |
Low water consumption. At 200 racks per hour, the machine uses |
|
|
cleaning. Unit to feature as standard end of day self cleaning cycle. Drain |
|
|||
|
of water from the machine can be done through the control panel. Large |
|
|
only 79 gal/hr (0.4 gal/rack). |
|
|
deep drawn 26 gal wash tank. |
|
• |
Machine predisposed for external detergent and rinse aid connections. |
|
|
Covered by Electrolux Platinum Star® Service Program two-year parts |
|
Included Accessories |
||
|
and one-year labor warranty, installation start-up and performance check- |
|
|
Vent cowls (left and right side). |
|
|
up after one year from installation. |
|
• |
||
|
|
|
• |
One open sided dishwasher rack for trays. |
|
|
|
|
|||
|
|
|
• |
Rack for cups. |
|
|
|
|
• |
Rack for dinner plates. |
|
3048424 |
|
Optional Accessories |
|||
|
• Ventilation activation kit. |
||||
Approval: ___________________________________________ |
|
||||
|
|
|
|
||
|
|
|
|
|
|
|
|
|
|
|
|
Electrolux Professional, Inc. www.electroluxusa.com/professional
3225 SW 42nd Street, Fort Lauderdale, Florida, 33312 • Telephone Number: 866-449-4200 • Fax Number: 954-327-6789
uiltB InHT44otr
with Dishwasher Conveyor Tank Single ″44
Warewashing
Electric
Supply voltage: 534070 |
208 V/3p/60Hz |
534071 208 V/3p/60Hz
534072 240 V/3p/60Hz
534073 240 V/3p/60Hz
Dishwasher has three selectable hot water booster configurations according to inlet water supply temperature.
Dishwasher requires two separate electrical service connections. Connection 1 for Hot Water Booster; Connection 2 for running of the machine (wash pump, tank heat, conveyor drive motor, rinse booster pump, electronic control). Refer to the information below for Amp requirements.
Booster 40 °F rise Electrical Characteristics
Hot Water Booster Amp Load Connection 1:
208 V/3p/60Hz |
33.35A (12 kW) |
240 V/3p/60Hz |
28.9A (12 kW) |
Wash Pump, Tank heat Amp Load Connection 2:
208 V/3p/60Hz |
61.7A (21 kW) |
240 V/3p/60Hz |
55A (21 kW) |
Total Amp Load: 208 V/3p/60Hz |
95A (33 kW) |
240 V/3p/60Hz |
83.9A (33 kW) |
Booster 70 °F rise Electrical Characteristics
Hot Water Booster Amp Load Connection 1:
208 V/3p/60Hz |
50A (18 kW) |
240 V/3p/60Hz |
43.3A (18 kW) |
Wash Pump, Tank heat Amp Load Connection 2:
208 V/3p/60Hz |
61.7A (21 kW) |
240 V/3p/60Hz |
55A (21 kW) |
Total Amp Load: 208 V/3p/60Hz |
111.6A (39 kW) |
240 V/3p/60Hz |
98.3A (39 kW) |
Booster 100 °F rise Electrical Characteristics
Hot Water Booster Amp Load Connection 1:
208 V/3p/60Hz |
66.6A (24 kW) |
240 V/3p/60Hz |
57.7A (24 kW) |
Wash Pump, Tank heat Amp Load Connection 2:
208 V/3p/60Hz |
61.7A (21 kW) |
240 V/3p/60Hz |
55A (21 kW) |
Total Amp Load: 208 V/3p/60Hz |
128.3A (45 kW) |
240 V/3p/60Hz |
112.7A (45 kW) |
Warewashing
44″ Single Tank Conveyor Dishwasher
with Built In Hot Water Booster WT44
Water
Inlet Water supply pressure: |
22 – 102 psi (150 – 700 kPa) |
Inlet Water supply temperature |
|
(booster size can be set on |
|
site during installation): |
140 °F (60 °C) |
|
with booster set as 40 °F rise. |
|
110 °F (44 °C) |
|
with booster set as 70 °F rise. |
|
80 °F (27 °C) |
|
with booster set as 100 °F rise. |
Inlet Water supply hardness: |
4-8 gpg (7-14 °fH) max |
Incoming water line size: |
G 3/4″ |
NOTE: Two Hot Water Inlets on machine can be fed by one incoming Hot Water line.
Drain line size: |
G 1-1/2″ |
Water consumption: Gallons/hr: |
79.25 gal/hr (300 liters) |
Water consumption/rack: |
0.4 gal/rack (1.5 l/rack) |
Wash Temperature: |
160 – 172 °F (71-78 °C) |
Wash tank size: |
26 gal (100 liters) |
Wash pump power: |
2 hp (1.5 kW) |
Wash pump water flow: |
118.9 gal/min (450 l/min) |
Rinse Temperature: |
180 – 194 °F (82-90 °C) |
Rinse pump power: |
0.4 hp (0.32 kW) |
Rinse pump water flow: |
1.32 gal/min (5 l/min) |
Hot water booster capacity: |
6.2 gal (24 liters) |
Initial fill water requirements: |
32.2 gal (124 liters) |
Exhaust Requirements
Unit supplied as standard with extended vent hoods (can be removed during installation if not required). Exhaust extraction not more than 177 CFM (300 m³/h) Refer to installation diagram for minimum exhaust hood installation height .
Key Information
Productivity racks per hour |
200 racks / 3600 dishes |
(max speed): |
(average 18 dishes per rack) |
Productivity racks per hour |
130 racks / 2340 dishes |
(min speed): |
(average 18 dishes per rack) |
Table to Table connection: |
44″ (1118 mm) |
Number of Tanks: |
1 |
Height with door open: |
83-7/16″ (2119 mm) |
Charging hole size (width): |
20-7/8″ (530 mm) |
Charging hole size (height): |
19-3/4″ (501 mm) |
Net weight: |
1012 lb (459 kg) |
Shipping weight: |
1210 lb (549 kg) |
Shipping width: |
74-7/16″ (1890 mm) |
Shipping depth: |
40-15/16″ (1040 mm) |
Shipping height: |
81-1/8″ (2060 mm) |
Shipping volume: |
143 cu.ft (4.05 m3) |
Noise level: |
<70 dBA |
Unit predisposed to accept external detergent dispensers, detergent probes and rinse aid dispensers.