PX1122M
12” Two-Way Dual
Manifolded HF
90° x 45° Full Range
Loudspeaker System
Key Features:
•Dual ND2 2”Voice Coil, 1” Exit Neodymium Compression Drivers
•DVX3121 12” LF Transducer with Forced Air Cooling
•Very High Sensitivity, 132 dB Maximum SPL
•Ultra-Compact, Low Profile, Multipurpose Design
•90° x 45° Coverage Pattern
•600W Continuous (2400W Peak) Power Handling
•Passive/Biamp Selectable
•Integral Rigging Point for VSA-1 Strong Arm
•Pole Mount for Tripod Use
General Description:
The Electro-Voice® PX1122M is a versatile fullrange, 2- way floor monitor loudspeaker system that is part of the Electro-Voice® Phoenix Series and is intended for high output sound reinforcement in a large range of portable sound applications. The PX1122M is capable of being configured as either passive or biamp, and can be used fullrange for stage monitor applications or used with a subwoofer as a very compact system with extended low frequency capability.
The PX1122M uses the DVX3121 woofer, a high efficiency 12-inch woofer with forced air cooling. Dual ND2-16 compression drivers are precisely summed in a manifold for increased power handling, maximum SPL, and low distortion. The very low distortion 90° x 45° horn provides optimal coverage in the PX1122M’s configurations. The enclosure is constructed of 18-mm, 13-ply plywood, using tongue and groove joints and EVCoatTM for long term durability.
As a stage monitor, the PX1122M provides symetrical left and right 60° monitor angles, and NL4 connectors on each side of the enclosure for connecting multiple monitors. An integrated rigging point allows for installation on a truss using the VSA-1 strong arm accessory.
Technical Specifications:
Freq. Response1 (-3 dB): |
70 Hz - 15 kHz |
||
Freq. Range1 (-10 dB): |
55 Hz - 19 kHz |
||
Rec. Hipass Frequency: |
50 Hz |
||
|
|
|
|
|
Axial Sensitivity1: |
98 dB (1W/1m) |
|
Max Calculated SPL1: |
132 dB |
||
Horizontal Coverage: |
90° |
||
|
|
||
Vertical Coverage: |
45° |
||
|
|
||
Power Handling (Passive): |
600W Continuous, 2400W Peak |
||
|
|
||
LF Power Handling (Biamp): |
500W Continuous, 2000W Peak |
||
|
|
||
HF Power Handling (Biamp): |
80W Continuous, 320W Peak |
||
|
|
|
|
|
|
LF Transducer: |
(1) DVX3121, 12 in. (305mm) Driver |
|
|
|
|
|
HF Transducers: |
(2) ND2-16, 2 in. (50mm) Diaphragm |
|
|
|
|
Compression Drivers |
|
|
||
Crossover Frequency: |
1400 Hz |
||
|
|
||
Impedance (Passive): |
8 Ohms Nominal |
||
|
|
||
LF Impedance (Biamp): |
8 Ohms Nominal |
||
HF Impedance (Biamp): |
8 Ohms Nominal |
||
|
|
|
|
|
|
Connectors: |
(3) Neutrik Speakon NL4's |
|
|
||
Enclosure Material: |
18mm Plywood with Black EVCoatTM |
||
|
|
Suspension: |
Rigging Point for VSA-1 Strong Arm |
|
|
|
Accessory |
|
|
Grille: |
Polyester Powder Coated, 16GA |
|
|
|
Galvanized Steel, with Rotatable Logo |
|
|
|
|
|
Dim (H x W x D): |
546mm x 366mm x 305mm |
|
|
|
|
(21.50" x 14.42" x 12.04") |
|
|
Net Weight: |
23.04 kg (50.8 lbs) |
|
|
|
|
|
Shipping Weight: |
26.14 kg (57.6 lbs) |
|
|
|
||
1 Half Space measurement. |
|
||
|
|
|
|
|
|
|
|