Elac A4.2 OPERATING INSTRUCTIONS

Debut 2.0™ Series by Andrew Jones.

Everything we do is dierent.

Few speakers have garnered such critical acclaim as the original Debut
Series by ELAC. They established a new value proposition, with build quality
and performance never before attainable at such an aordable price.
Debut “changed the game,” and has now changed it again with the Debut

2.0 Series—proof that ELAC can’t leave well enough alone. Redesigned
from the ground up, these speakers sound even more remarkable than the
ones that sparked the revolution in aordable high-end sound.

Debut A4.2

®

Dolby Atmos
Add-On Speakers

Adds a whole new dimension in entertainment.

Dolby Atmos technology expands the sonic landscape, creating
a true 3-D space that you’ve got to hear to believe. With Dolby
Atmos-enabled AV receivers and processors, simply add the
Debut A4.2 to the top of your bookshelf or floorstanding speakers
to achieve dimensionality that puts you in the middle of the music
and the action.

DEBUT 2.0 SERIES FEATURES

Add-On Speakers

®

Woven Aramid-Fiber Woofer
Woven aramid fiber oers a superior stiness-to-weight
ratio and damping over common polypropylene or paper
cones. The added strength allows more flexibility in design
to achieve a smooth, extended low-frequency response.

Dolby Atmos Certified
This speaker is designed to sit on top of a traditional
floorstanding or bookshelf speaker to add a height
dimension to your home theater system without the
need for in-ceiling speakers.*

Custom Concentric Driver
Designed by Andrew Jones, this concentric driver
delivers an exceptional audio experience and oers
a smoother, more extended response and better
directivity control over conventional full-range drivers.

Intricate Crossover
A custom crossover with audio-grade components
has been designed to ensure smooth transition
between drivers.

A4.2 SPECIFICATIONS

SPEAKER TYPE Sealed, 2-way concentric

FREQUENCY RESPONSE 180 to 20,000 Hz

NOMINAL IMPEDANCE 6 Ω

SENSITIVITY 85 dB at 2.83 v/1m

CROSSOVER FREQUENCY 2,000 Hz

MAXIMUM POWER INPUT 80 Watts

TWEETER .5-inch polymer dome

WOOFER 4-inch woven aramid-fiber

cone with oversized magnet

CABINET CARB2 rated MDF

CABINET FINISH Black Ash vinyl

BINDING POSTS 5-way metal

WIDTH 7.09 in / 180 mm

HEIGHT 4.92 in / 125 mm

DEPTH 9.21 in / 234 mm

WEIGHT 5.416 lb / 2.4 kg

* A Dolby Atmos® receiver or processor is required to use these add-on speaker modules.

Please visit Dolby.com to see if this add-on module is correct for your room.

Debut A4.2 Dolby Atmos

©2018 ELAC Americas, Inc. All rights reserved. Specifications and design subject to change without notice.

Debut 2.0™ Series