Eizo GS520-BL, GS520-CL, GS520-CLG, GS520-BLG User Manual

0 (0)

Important

Please read this User's Manual carefully to familiarize yourself with safe and effective usage procedures. Please retain this manual for future reference.

Wichtig

Bitte lesen Sie diese Bedienungsanleitung sorgfältig durch, um sich mit dem sicheren und rationellen Betrieb dieses Produkts vertraut zu machen. Bewahren Sie das vorliegende Handbuch zu Referenzzwecken auf.

Important

Veuillez lire attentivement ce manuel d’utilisation pour utiliser pleinement votre appareil en toute sécurité. Veuillez conserver ce manuel pour référence ultérieure.

English

Deutsch

Français

For U.S.A. , Canada, etc. (rated 100-120 Vac) Only

FCC Declaration of Conformity

We, the Responsible Party

EIZO NANAO TECHNOLOGIES INC.

 

5710 Warland Drive, Cypress, CA 90630

 

Phone: (562) 431-5011

declare that the product

 

Trade name: EIZO

 

Model: RadiForce GS520

is in conformity with Part 15 of the FCC Rules. Operation of this product is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures.

*Reorient or relocate the receiving antenna.

*Increase the separation between the equipment and receiver.

*Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.

*Consult the dealer or an experienced radio/TV technician for help.

Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

Note

Use the attached specified cable below or EIZO signal cable with this monitor so as to keep interference within the limits of a Class B digital device.

-AC Cord

-Shielded Signal Cable (Enclosed)

Canadian Notice

This Class B digital apparatus complies with Canadian ICES-003.

Cet appareil numérique de le classe B est comforme à la norme NMB-003 du Canada.

Eizo GS520-BL, GS520-CL, GS520-CLG, GS520-BLG User Manual

English

It shall be assured that the final system is in compliance to IEC60601-1-1 requirements.

SAFETY SYMBOLS

SAFETY SYMBOLS

This manual uses the safety symbols below. They denote critical information. Please read them carefully.

WARNING

Failure to abide by the information in a WARNING may result in serious injury and can be life threatening.

CAUTION

Failure to abide by the information in a CAUTION may result in moderate injury and/or propertyor product damage.

Indicates a prohibited action.

Indicates to ground for safety.

Power supplied equipment can emit electromagnetic waves, that could influence, limit or result in malfunction of the monitor. Install the equipment in a controlled environment, where such effects are avoided.

This is a monitor intended for use in a medical image system.

Product specifications may vary depending on the region. Confirm the specifications in the manual written in the language of the region of purchase.

Copyright© 2008 EIZO NANAO CORPORATION All rights reserved. No part of this manual may be reproduced, stored in a retrieval system, or transmitted, in any form or by any means, electronic, mechanical, or otherwise, without the prior written permission of EIZO NANAO CORPORATION.

EIZO NANAO CORPORATION is under no obligation to hold any submitted material or information confidential unless prior arrangements are made pursuant to EIZO NANAO CORPORATION's receipt of said information. Although every effort has been made to ensure that this manual provides up-to-date information, please note that EIZO monitor specifications are subject to change without notice.

Apple and Macintosh are registered trademarks of Apple Inc.

VGA is a registered trademark of International Business Machines Corporation. VESA is a registered trademark of Video Electronics Standards Association. Windows is a registered trademark of Microsoft Corporation.

RealVision is a registered trademark of RealVision Inc.

Matrox is a registered trademark of Matrox Electronic Systems Ltd.

PowerManager, RadiCS and RadiNET are trademarks of EIZO NANAO CORPORATION.

ScreenManager, RadiForce and EIZO are registered trademarks of EIZO NANAO CORPORATION in Japan and other countries.

 

TABLE OF CONTENTS

TABLE OF CONTENTS

 

PRECAUTIONS.....................................................................................................................

4

1. Introduction...............................................................................................................................

9

1-1. Features......................................................................................................................................

9

1-2. Package Contents.......................................................................................................................

9

1-3. Controls and Connectors..........................................................................................................

10

2. Installation..............................................................................................................................

12

2-1. Before Connecting....................................................................................................................

12

2-2. Cable Connection.....................................................................................................................

13

2-3. Environmental Settings ............................................................................................................

16

3. Adjustment and Settings........................................................................................................

18

3-1. How to use the ScreenManager...............................................................................................

18

3-2. ScreenManager menu..............................................................................................................

19

3-3. CAL Switch Function................................................................................................................

23

3-4. Adjustment Lock Function.........................................................................................................

24

4. Brightness Adjustment and Image Adjustment......................................................................

25

4-1. Brightness Adjustment..............................................................................................................

25

4-2. Image Adjustments...................................................................................................................

25

5. Making use of USB (Universal Serial Bus).............................................................................

26

6. Attaching an Arm....................................................................................................................

28

7. Troubleshooting......................................................................................................................

29

8. Cleaning.................................................................................................................................

31

9. Specifications.........................................................................................................................

32

10. Glossary...............................................................................................................................

35

English

PRECAUTIONS

PRECAUTIONS

IMPORTANT!

This product has been adjusted specifically for use in the region to which it was originally shipped.

If operated outside the region to which it was originally shipped, the product may not perform as stated in the specifications.

To ensure personal safety and proper maintenance, please read this section and the caution statements on the unit (refer to the figure below).

[Location of the Caution Statements]

[Symbols on the unit]

Symbol

Location

This symbol indicates

 

 

 

 

Rear

Main power switch

 

 

 

 

 

Press to turn the monitor’s main power off.

 

 

 

 

Rear

Main power switch

 

 

 

 

 

Press to turn the monitor’s main power on.

 

 

 

 

 

 

 

 

 

 

Front

Power switch

 

 

 

 

Control Panel

Press to turn the monitor’s power on or off.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Rear

Alternating current

 

 

 

 

Name Plate

 

 

 

 

 

Rear

Alerting electrical hazard

 

 

 

 

 

 

 

 

 

 

Rear

Caution

 

 

 

 

 

Refer to SAFETY SYMBOLS section in this manual.

 

 

 

 

 

 

PRECAUTIONS

WARNING

If the unit begins to emit smoke, smells like something is burning, or makes strange noises, disconnect all power connections immediately and contact your dealer for advice.

Attempting to use a malfunctioning unit may result in fire, electric shock, or equipment damage.

Do not open the cabinet or modify the unit.

Opening the cabinet or modifying the unit may result in fire, electric shock, or burn.

Refer all servicing to qualified service personnel.

Do not attempt to service this product yourself as opening or removing covers may result in fire, electric shock, or equipment damage.

Keep small objects or liquids away from the unit.

Small objects accidentally falling through the ventilation slots into the cabinet or spillage into the cabinet may result in fire, electric shock, or equipment damage. If an object or liquid falls/spills into the cabinet, unplug the unit immediately. Have the unit checked by a qualified service engineer before using it again.

Place the unit at the strong and stable place.

 

A unit placed on an inadequate surface may fall and result in injury or

 

equipment damage. If the unit falls, disconnect the power immediately and

 

ask your dealer for advice. Do not continue using a damaged unit. Using a

OK

damaged unit may result in fire or electric shock.

 

Set the unit in an appropriate location.

 

Not doing so may result in fire, electric shock, or equipment damage.

 

• Do not place outdoors.

 

• Do not place in the transportation system (ship, aircraft, trains,

 

automobiles, etc.)

 

• Do not place in a dusty or humid environment.

 

Do not place in a location where the steam comes directly on the screen.

Do not place near heat generating devices or a humidifier.

Do not place in an inflammable gas environment.

To avoid danger of suffocation, keep the plastic packing bags away from babies and children.

English

PRECAUTIONS

WARNING

Use the enclosed power cord and connect to the standard power outlet of your country.

Be sure to remain within the rated voltage of the power cord. Not doing so may result in fire or electric shock.

Power supply: 100-120/200-240 Vac 50/60Hz

To disconnect the power cord, grasp the plug firmly and pull.

OK

Tugging on the cord may damage and result in fire or electric shock.

 

The equipment must be connected to a grounded main outlet.

Not doing so may result in fire or electric shock.

Use the correct voltage.

The unit is designed for use with a specific voltage only. Connection to another voltage than specified in this Use’s Manual may cause fire, electric shock, or equipment damage.

Power supply: 100-120/200-240 Vac 50/60Hz

Do not overload your power circuit, as this may result in fire or electric shock.

Handle the power cord with care.

Do not place the cord underneath the unit or other heavy objects.

Do not pull on or tie the cord.

If the power cord becomes damaged, stop using it. Use of a damaged cord may result in fire or electric shock

Never touch the plug and power cord if it begins to thunder.

Touching them may result in electric shock.

When attaching an arm stand, please refer to the user's manual of the arm stand and install the unit securely.

Not doing so may cause the unit to come unattached, which may result in injury or equipment damage. When the unit is dropped, please ask your dealer for advice. Do not continue using a damaged unit. Using a damaged unit may result in fire or electric shock. When reattaching the tilt stand, please use the same screws and tighten them securely.

PRECAUTIONS

WARNING

Do not touch a damaged LCD panel directly with bare hands.

The liquid crystal which leaks from the panel is poisonous if it enters the eyes or mouth.

If any part of the skin or body comes in direct contact with the panel, please wash thoroughly. If some physical symptoms result, please consult your doctor.

Lamps contain mercury, dispose according to local, state or federal laws.

CAUTION

Handle with care when carrying the unit.

Disconnect the power cord and cables when moving the unit. Moving the unit with the cord attached is dangerous. It may result in injury.

When handling the unit, grip the bottom of the unit firmly with both hands ensuring the panel faces outward before lifting.

Dropping the unit may result in injury or equipment damage.

Do not block the ventilation slots on the cabinet.

Do not place any objects on the ventilation slots.

Do not install the unit in a closed space.

Do not use the unit laid down or upside down.

Blocking the ventilation slots prevents proper airflow and may result in fire, electric shock, or equipment damage.

Do not touch the plug with wet hands.

Doing so may result in electrical shock.

Use an easily accessible power outlet.

This will ensure that you can disconnect the power quickly in case of a problem.

Periodically clean the area around the plug.

Dust, water, or oil on the plug may result in fire.

Unplug the unit before cleaning it.

Cleaning the unit while it is plugged into a power outlet may result in electric shock.

If you plan to leave the unit unused for an extended period, disconnect the power cord from the wall socket after turning off the power switch for the safety and the power conservation.

English

PRECAUTIONS

Notice for this monitor

The backlight of the LCD panel has a fixed life span. When the screen becomes dark or begins to flicker, please contact your dealer.

The backlight of the LCD panel has a fixed life span. When the screen becomes dark or begins to flicker, please contact your dealer.

Do not press on the panel or edge of the frame strongly, as this may result in damage to the screen. There will be prints left on the screen if the pressed image is dark or black. If pressure is repeatedly applied to the screen, it may deteriorate or damage your LCD panel. Leave the screen white or black to decrease the prints.

When the screen image is changed after displaying the same image for extended periods of time, an afterimage may appear. Use the screen saver or timer to avoid displaying the same image for extended periods of time.

When the monitor is cold and brought into a room or the room temperature goes up quickly, dew condensation may occur inside and outside the monitor. In that case, do not turn the monitor on and wait until dew condensation disappears, otherwise it may cause some damages to it.

Do not scratch or press on the panel with any sharp objects, such as a pencil or pen as this may result in damage to the panel. Do not attempt to brush with tissues as this may scratch the LCD panel.

To use the monitor comfortably

An excessively dark or bright screen may affect your eyes. Adjust the brightness of the monitor according to the environmental conditions.

Staring at the monitor for a long time tires your eyes. Take a 10-minute rest every hour.

1. Introduction

1. Introduction

Thank you for choosing an EIZO Monochrome Monitor.

1-1. Features

DVI (p.35) digital input (TMDS (p.35)) compliant

Horizontal scan frequency

31 - 135 kHz

Vertical scan frequency

19.0

- 61.0

Hz

 

(VGA TEXT: 69 - 71 Hz, QSXGA: 19 - 51 Hz,)

Frame synchronous mode

49.0

- 51.0

Hz supported

Resolution

5M pixels (Portrait: 2048 × 2560 dots (H × V))

CAL Switch function for selecting an optimal calibration mode (p. 23)

Selectable DICOM (p. 35) Part 14 complied screen

USB (Universal Serial Bus) hub support (p. 26)

The quality control software “RadiCS LE“ (for Windows) used to calibrate the monitor is included (refer to the EIZO LCD Utility Disk).

The utility software “ScreenManager Pro for Medical“ (for Windows) to control the monitor from a PC with mouse/keyboard is included (refer to the EIZO LCD Utility Disk).

The height adjustable stand incorporated

Slim bezel

1-2. Package Contents

Please contact your local dealer for assistance if any of the listed items are missing or damaged.

LCD Monitor*1

User’s Manual

Power Cord

LIMITED WARRANTY

Signal Cable (FD-C39)

Cleaning Kit “ScreenCleaner”

EIZO USB Cable (MD-C93)

(GS520-BLG / GS520-CLG only)

EIZO LCD Utility Disk

Recycling Information

*1 The landscape position is the default monitor orientation. For the portrait position, rotate the monitor ninety degrees counter-clockwise before installing it.

Tips

Please retain the packing materials for future transport of the monitor.

English

1. Introduction

1-3. Controls and Connectors

Front

ScreenManager®

main menu

Control Panel

CAL Switch menu

(1)

Mode Switch

Displays the CAL Switch menu (p. 23).

(2)

Enter Switch

Displays the Adjustment menu, determines an item on the menu

 

 

screen, and saves values adjusted

 

(3)

Directing Switches*1

Chooses an adjustment item or increases/decreases adjusted

 

(Left, Down, Up, Right)

values for advanced adjustments using the Adjustment menu

 

 

(p. 18)

 

(4)

Power Switch

Turns the power on or off.

 

(5)

Power indicator*2

Indicates monitor’s operation status.

 

 

 

Green:

Operational

 

 

Orange:

Power saving

 

 

Flashing orange slowly:

Power off (Main power is on)

 

 

Off:

Main Power off

*1 When the monitor is oriented in the landscape position, these switches can be changed to Up, Left, Right, and Down (p. 16).

*2 To disable the power indicator while the monitor is operational, see p. 22. For power indicator status when using the “Off Timer,” see p.22.

10

1. Introduction

Side / Rear

English

Power connector

Main Power Switch

(6)

USB port (Up)

Connects the USB cable in order to use the provided software.

(7)

USB port (Down)

Connects a peripheral USB device.

(8)

Input signal connectors

DVI-D connector

(9)

Security lock slot*3

Complies with Kensington’s MicroSaver security system.

(10)

Stand*4

Used to adjust the height and angle of the monitor screen.

*3 Allows for connection of a security cable.

*4 The LCD monitor can be oriented in the landscape position. (It can rotate clockwise ninety degrees.) By removing the monitor stand, the LCD monitor can be used with the optional arm stand (p. 28).

11

Loading...
+ 28 hidden pages