Eizo G22-BL, G22-CL User Manual

0 (0)

User’s Manual

Monochrome LCD Monitor

It shall be assured that the final system is in compliance to IEC60601-1-1 requirements.

English

SAFETY SYMBOLS

This manual uses the safety symbols below. They denote critical information. Please read them carefully.

WARNING

Failure to abide by the information in a WARNING may result in serious injury and can be life threatening.

CAUTION

Failure to abide by the information in a CAUTION may result in moderate injury and/or property or product damage.

Indicates a prohibited action.

Indicates to ground for safety.

Power supplied equipment can emit electromagnetic waves, that could influence, limit or result in malfunction of the monitor. Install the equipment in a controlled environment, where such effects are avoided.

This is a monitor intended for use in a medical setting.

Copyright© 2004 EIZO NANAO CORPORATION All rights reserved. No part of this manual may be reproduced, stored in a retrieval system, or transmitted, in any form or by any means, electronic, mechanical, or otherwise, without the prior written permission of EIZO NANAO CORPORATION.

EIZO NANAO CORPORATION is under no obligation to hold any submitted material or information confidential unless prior arrangements are made pursuant to EIZO NANAO CORPORATION’s receipt of written information. Although every effort has been made to ensure that this manual provides up-to-date information, please note that EIZO monitor specifications are subject to change without notice.

PowerManager and RadiCS are trademarks of EIZO NANAO CORPORATION. ScreenManager, RadiForce and EIZO are registered trademarks of EIZO NANAO CORPORATION in Japan and other countries.

2

 

 

English

TABLE OF CONTENTS

 

PRECAUTIONS ...................................................................................

4

1. INTRODUCTION .....................................................................................

9

1-1. Features ........................................................................................................

9

1-2. Package Contents..........................................................................................

9

1-3. Controls & Connectors ..............................................................................

10

2. CABLE CONNECTION .........................................................................

12

3. ScreenManager ....................................................................................

15

3-1.

How to use the ScreenManager ..................................................................

15

3-2.

ScreenManager Adjustments and Settings...................................................

16

3-3.

Useful Functions .........................................................................................

17

3-4.

Power-save Setup ........................................................................................

19

4. MAKING USE OF USB (Universal Serial Bus) ...................................

20

5. ATTACHING AN ARM ...........................................................................

22

6. TROUBLESHOOTING...........................................................................

24

7. CLEANING ............................................................................................

27

8. SPECIFICATIONS.................................................................................

28

9. GLOSSARY...........................................................................................

31

TABLE OF CONTENTS 3

Eizo G22-BL, G22-CL User Manual

English

PRECAUTIONS

IMPORTANT!

This product has been adjusted specifically for use in the region to which it was originally shipped. If operated outside the region to which it was originally shipped, the product may not perform as stated in the specifications.

To ensure personal safety and proper maintenance, please read this section and the caution statements on the unit (refer to the figure below).

[Location of the Caution Statements]

[Symbols on the unit]

Symbol

Location

This symbol indicates

 

 

Side

Main power switch

 

 

 

Press to turn the monitor’s main power off.

 

 

 

 

 

 

Side

Main power switch

 

 

 

 

 

Press to turn the monitor’s main power on.

 

 

 

 

 

 

Front

Power button

 

 

 

 

Control panel

Press to turn the monitor’s power on or off.

 

 

 

 

 

 

 

 

Rear

Alternating current

 

 

Name Plate

 

 

 

Rear

Alerting electrical hazard

 

 

Name Plate

 

 

 

 

 

 

 

Rear

Caution

 

 

Name Plate

Refer to SAFETY SYMBOLS section in this

 

 

 

manual.

4PRECAUTIONS

English

WARNING

If the unit begins to emit smoke, smells like something is burning, or makes strange noises, disconnect all power connections immediately and contact your dealer for advice.

Attempting to use a malfunctioning unit may result in fire, electric shock, or equipment damage.

Do not open the cabinet or modify the unit.

Opening the cabinet or modifying the unit may result in fire, electric shock, or burn.

Refer all servicing to qualified service personnel.

Do not attempt to service this product yourself as opening or removing covers may result in fire, electric shock, or equipment damage.

Keep small objects or liquids away from the unit.

Small objects accidentally falling through the ventilation slots into the cabinet or spillage into the cabinet may result in fire, electric shock, or equipment damage.

If an object or liquid falls/spills into the cabinet, unplug the unit immediately. Have the unit checked by a qualified service engineer before using it again.

Place the unit at the strong and stable place.

A unit placed on an inadequate surface may fall and result in injury or equipment damage.

If the unit falls, disconnect the power immediately and ask your dealer for

advice.

OK

Do not continue using a damaged unit. Using a damaged unit may result in fire or electric shock.

Set the unit in an appropriate location.

Not doing so may result in fire, electric shock, or equipment damage.

* Do not place outdoors.

* Do not place in the transportation system (ship, aircraft, trains, automobiles, etc.)

* Do not place in a dusty or humid environment.

*Do not place in a location where the steam comes directly on the screen.

*Do not place near heat generating devices or a humidifier.

*Do not place in an inflammable gas environment.

PRECAUTIONS 5

English

WARNING

To avoid danger of suffocation, keep the plastic packing bags away from babies and children.

Use the enclosed power cord and connect to the standard power outlet of your country.

Be sure to remain within the rated voltage of the power cord. Not doing so may result in fire or electric shock.

To disconnect the power cord, grasp the plug firmly and pull.

Tugging on the cord may damage and result in fire or electric shock.

OK

The equipment must be connected to a grounded main outlet.

Not doing so may result in fire or electric shock.

Use the correct voltage.

*The unit is designed for use with a specific voltage only. Connection to another voltage than specified in this User’s Manual may cause fire, electric shock, or equipment damage.

*Do not overload your power circuit, as this may result in fire or electric shock.

Handle the power cord with care.

*Do not place the cord underneath the unit or other heavy objects.

*Do not pull on or tie the cord.

If the power cord becomes damaged, stop using it. Use of a damaged cord may result in fire or electric shock.

Never touch the plug and power cord if it begins to thunder.

Touching them may result in electric shock.

6PRECAUTIONS

English

WARNING

When attaching an arm stand, please refer to the user’s manual of the arm stand and install the unit securely with the enclosed screws.

Not doing so may cause the unit to become unattached, which may result in injury or equipment damage. When the unit is dropped, please ask your dealer for advice. Do not continue using a damaged unit. Using a damaged unit may result in fire or electric shock. When reattaching the tilt stand, please use the same screws and tighten them securely.

Do not touch a damaged LCD panel directly with bare hands.

The liquid crystal that may leak from the panel is poisonous if it enters the eyes or mouth.

If any part of the skin or body comes in direct contact with the panel, please wash thoroughly. If some physical symptoms result, please consult your doctor.

Follow local regulation or laws for safe disposal.

The backlight of the LCD panel contains mercury.

CAUTION

Handle with care when carrying the unit.

Disconnect the power cord and signal cables and remove the optional unit. Moving the unit with the cord or the option attached is dangerous. It may result in injury.

When handling the unit, grip the bottom of the unit firmly with both hands ensuring the panel faces outward before lifting.

Dropping the unit may result in injury or equipment damage.

OK

Do not block the ventilation slots on the cabinet.

* Do not place any objects on the ventilation slots.

*Do not install the unit in a closed space.

*Do not use the unit laid down or upside down.

Blocking the ventilation slots prevents proper airflow and may result in fire, electric shock, or equipment damage.

PRECAUTIONS 7

English

CAUTION

Do not touch the plug with wet hands.

Doing so may result in electric shock.

Use an easily accessible power outlet.

This will ensure that you can disconnect the power quickly in case of a problem.

Periodically clean the area around the plug.

Dust, water, or oil on the plug may result in fire.

Unplug the unit before cleaning it.

Cleaning the unit while it is plugged into a power outlet may result in electric shock.

If you plan to leave the unit unused for an extended period, disconnect the power cord from the wall socket after turning off the power switch for the safety and the power conservation.

LCD Panel

In order to suppress the luminosity change by long-term use and to maintain the stable luminosity, please use the monitor with the brightness below 500 cd/m2 (equal to default setting of BRIGHTNESS approximately 70 %).

The screen may have defective pixels. These pixels may appear as slightly light or dark area on the screen. This is due to the characteristics of the panel itself, and not the product.

The backlight of the LCD panel has a fixed life span. When the screen becomes dark or begins to flicker, please contact your dealer.

Do not press on the panel or edge of the frame strongly, as this may result in damage to the screen. There will be prints left on the screen if the pressed image is dark or black. If pressure is repeatedly applied to the screen, it may deteriorate or damage your LCD panel. Leave the screen white to decrease the prints.

Do not scratch or press on the panel with any sharp objects, such as a pencil or pen as this may result in damage to the panel. Do not attempt to brush with tissues as this may scratch the panel.

8PRECAUTIONS

English

1. INTRODUCTION

Thank you very much for choosing an EIZO Monochrome Monitor.

1-1. Features

DVI (p.31) Digital input (TMDS (p.31)) compliant

[Resolution] 2M pixels (1600 dots × 1200 lines) [Horizontal scanning frequency] 75 kHz [Vertical scanning frequency] 60 Hz

USB (Universal Serial Bus) hub supported (p.20)

The height adjustable stand incorporated

Ultra slim bezel incorporated

Power saving function (p.18) (DVI-DMPM(p.31))

NOTE

Regarding the scanning resolution, the G22-BL/G22-CL supports only the exclusive timing.

1-2. Package Contents

Please contact your local dealer for assistance if any of the listed items are missing or damaged.

LCD Monitor *1

Power Cord

Signal Cable (FD-C39)

EIZO USB Cable (MD-C93)

User’s Manual

LIMITED WARRANTY

*1

The orientation of display is landscape position at the default setting. For the

 

 

portrait display, pivot the panel in the counter-clockwise direction 90° before

 

installing the monitor.

NOTE

Please retain the packing materials for future transference.

1. INTRODUCTION

9

English

1-3. Controls & Connectors

Front

 

(1)

(2)

 

Control Panel

ENTER

 

(3) (4) (5) (6)

(1)ScreenManager®

(2)

 

 

 

 

Main Power Switch

 

 

 

 

 

 

(3)

ENTER

Enter Button

 

(4)

 

 

 

 

Control Buttons (Left, Down, Up, Right) *1

(5)

 

 

 

 

Power Button

 

 

 

 

 

 

 

 

 

 

 

(6)

 

 

 

 

Power Indicator *2

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Green

 

Operation

 

 

 

Orange

 

Power saving

 

 

 

Flashing orange (2 times for each)

Power save mode

 

 

 

Flashing orange slowly

Power is off (Main power is on)

 

 

 

 

 

 

 

 

 

Off

 

Power off

*1

These buttons are changed to Up, Left, Right, Down in case of selecting

 

 

“Landscape” for <Orientation> of ScreenManager <Others> (p.16).

*2

Green lighting when the screen is displayed (Operation mode) can be changed to

 

 

non-light, see page 16.

Regarding the power indicator for the off timer, see page 17.

10 1. INTRODUCTION

Loading...
+ 23 hidden pages