EIC ULCE8.0A, ULCE8.0, ULCE75, ULCE75A, ULCE70A Datasheet

...
0 (0)
ULCE SERIES
TRANSIENT VOLTAGE
VBR : 6.5 - 90 Volts
PPK : 1500 Watts
FEATURES :
MECHANICAL DATA
MAXIMUM RATINGS
Note :
UPDATE : APRIL 6, 2002
* 1500W Peak Pulse Surge reverse capability on 10/1000µs waveform * Excellent clamping capability * Low incremental surge resistance * Fast response time : typically less than 5.0 ns from 0 volts to BV
* Case : DO-201 Molded plastic * Epoxy : UL94V-O rate flame retardant * Lead : Axial lead solderable per MIL-STD-202,
method 208 guaranteed * Polarity : Color band denotes positive end on the Transorb (cathode) * Mounting position : Any * Weight : 0.93 gram
ULTRA LOW CAPACITANCE
DO-201
0.21 (5.33)
0.19 (4.83)
0.042 (1.07)
0.038 (0.97)
Dimensions in inches and (millimeters)
1.00 (25.4) MIN.
0.375 (9.53)
0.285 (7.24)
1.00 (25.4) MIN.
Rating at 25 °C ambient temperature unless otherwise specified.
Peak Pulse Power Dissipation on 10/1000µs waveform (Note 1, Figure 1) Steady State Power Dissipation at TL = 75 °C Lead Lengths 0.375", (9.5mm) (Note 2) Peak Pulse Power Surge Current on 10/1000 µs Waveform (Fig. 3, Note 1)
Operating and Storage Temperature Range TJ, T
(1) Non-repetitive Current pulse, per Fig. 3 and derated above Ta = 25 °C per Fig. 2 (2) 8.3 ms single half sine-wave, duty cycle = 4 pulses per minutes maximum.
Rating Symbol Value Unit
PPM
P
I
D
P
RSM
STG
Minimum 1500 Watts
5.0 Watts
See Table 1. Amps.
- 65 to + 175
°C
Loading...
+ 2 hidden pages