EIC KBP210, KBP208, KBP202, KBP206, KBP201 Datasheet
...
KBP200 - KBP210
PRV : 50 - 1000 Volts
Io : 2.0 Amperes
FEATURES :
*High case dielectric strength
*High surge current capability
*High reliability
*Low reverse current
*Low forward voltage drop
*Ideal for printed circuit board
MECHANICAL DATA :
*Case : Molded plastic
*Epoxy : UL94V-O rate flame retardant
*Terminals : Plated lead solderable per
MIL-STD-202, Method 208 guaranteed
*Polarity : Polarity symbols marked on case
*Mounting position : Any
*Weight : 3.4 grams
SILICON BRIDGE RECTIFIERS
KBP
0.71 (18.0)
0.63 (16.0)
0.825 (20.95) |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
0.605 (15.36) |
|
|
|
|
|
|
+ AC |
AC |
|
|
|
|
|
|
|
|
|
|
||||||||||
|
|
|
|
|
|
|
|
|
|
|
||||||||||||||||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
0.035 (0.89) |
|
||||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
||||||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
||||||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
0.028 (0.71) |
|
||||||
0.500 (12.7) |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
0.16 (4.00) |
|
|||||||||
|
MIN. |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
0.14 (3.55) |
|
||||||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
0.276 (7.01 ) |
||||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
0.105 (2.66) |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
0.236 (5.99) |
|
||||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|||||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
||||
0.085 (2.16) |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Dimensions in inches and ( millimeter )
MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS
Rating at 25 °C ambient temperature unless otherwise specified.
Single phase, half wave, 60 Hz, resistive or inductive load.
For capacitive load, derate current by 20%.
RATING |
|
SYMBOL |
KBP |
KBP |
KBP |
|
KBP |
|
KBP |
KBP |
KBP |
UNIT |
|
200 |
201 |
202 |
|
204 |
|
206 |
208 |
210 |
|||
|
|
|
|
|
|
|||||||
Maximum Recurrent Peak Reverse Voltage |
VRRM |
50 |
100 |
200 |
|
400 |
|
600 |
800 |
1000 |
Volts |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Maximum RMS Voltage |
|
VRMS |
35 |
70 |
140 |
|
280 |
|
420 |
560 |
700 |
Volts |
|
|
|
|
|
|
|
|
|
|
|
|
|
Maximum DC Blocking Voltage |
|
VDC |
50 |
100 |
200 |
|
400 |
|
600 |
800 |
1000 |
Volts |
|
|
|
|
|
|
|
|
|
|
|
|
|
Maximum Average Forward Current Tc = 50°C |
IF(AV) |
|
|
|
2.0 |
|
|
|
|
Amps. |
||
Peak Forward Surge Current, Single half sine wave |
|
|
|
|
|
|
|
|
|
|
|
|
Superimposed on rated load (JEDEC Method) |
IFSM |
|
|
|
60 |
|
|
|
|
Amps. |
||
|
|
|
|
|
|
|
|
|
|
|
|
|
Rating for fusing ( t < 8.3 ms. ) |
|
I2t |
|
|
|
10 |
|
|
|
|
A2S |
|
Maximum Forward Voltage per Diode at IF = 1.0 Amp. |
VF |
|
|
|
1.0 |
|
|
|
|
Volts |
||
|
|
|
|
|
|
|
|
|
|
|
|
|
Maximum DC Reverse Current |
Ta = 25 °C |
IR |
|
|
|
10 |
|
|
|
|
μA |
|
at Rated DC Blocking Voltage |
Ta = 100 °C |
IR(H) |
|
|
|
1.0 |
|
|
|
|
mA |
|
Typical Junction Capacitance per Diode (Note 1) |
CJ |
|
|
|
24 |
|
|
|
|
pF |
||
Typical Thermal Resistance (Note 2) |
RθJA |
|
|
|
30 |
|
|
|
|
°C/W |
||
Operating Junction Temperature Range |
TJ |
|
|
|
- 50 to + 125 |
|
|
|
°C |
|||
Storage Temperature Range |
|
TSTG |
|
|
|
- 50 to + 125 |
|
|
|
°C |
||
|
|
|
|
|
|
|
|
|
|
|
|
|
Notes :
1 ) Measured at 1.0 MHz and applied reverse voltage of 4.0 Volts.
2 ) Thermal resistance from Junction to Ambient with units mounted on a 0.47" X 0.47" ( 12mm X 12mm ) Cu. Pads.
UPDATE : MARCH 6, 2000
Loading...