BR1500W - BR1510W
SILICON BRIDGE RECTIFIERS
PRV : 50 - 1000 Volts
Io : 15 Amperes
* High current capability
* High surge current capability
* High reliability
* Low reverse current
* Low forward voltage drop
* Ideal for printed circuit board
* Case : Molded plastic with heatsink integrally
mounted in the bridge encapsulation
* Epoxy : UL94V-O rate flame retardant
* Terminals : Plated lead solderable per
MIL-STD-202, Method 208 guaranteed
* Polarity : Polarity symbols marked on case
* Mounting position : Bolt down on heat-sink
with silicone thermal compound between
bridge and mounting surface for maximum
heat transfer efficiency
* Weight : 15.95 grams
MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS
C ambient temperature unless otherwise specified.
Single phase, half wave, 60 Hz, resistive or inductive load.
For capacitive load, derate current by 20%.
SYMBOL
BR
BR
BR
BR
BR
BR
BR
UNIT
Maximum Recurrent Peak Reverse Voltage
VRRM
50 100 200 400 600 800 1000
Volts
Maximum RMS Voltage
VRMS
35 70 140 280 420 560 700
Volts
Maximum DC Blocking Voltage
VDC
50 100 200 400 600 800 1000
Volts
Maximum Average Forward Current Tc = 55
°
C
IF(AV)
15
Amps.
Peak Forward Surge Current Single half sine wave
Superimposed on rated load (JEDEC Method)
IFSM
300
Amps.
Current Squared Time at t < 8.3 ms.
I
2
t
375
A
2
S
Maximum Forward Voltage per Diode at I
F
= 7.5 Amp.
VF
1.1
Volts
Maximum DC Reverse Current Ta = 25
°
C
IR
10
µA
at Rated DC Blocking Voltage Ta = 100
°
C
IR(H)
200
µA
Typical Thermal Resistance (Note 1)
RθJC
1.9
°C/W
Operating Junction Temperature Range
TJ
- 40 to + 150
°C
Storage Temperature Range
TSTG
- 40 to + 150
°C
Notes :
1. Thermal Resistance from junction to case with units mounted on a 5" x 4" x 3" (12.7cm.x 10.2cm.x 7.3cm.) Al.-Finned Plate
RATING
BR50W
Dimensions in inches and ( millimeters )
0.042 (1.06)
0.038 (0.96)
0.310 (7.87)
0.280(7.11)
1.2 (30.5)
0.470 (11.9)
0.430 (10.9)
0.21 (5.3)
0.20 (5.1)
0.732 (18.6)
0.692 (17.5)
1.130 (28.7)
1.120 (28.4)