EdgeStar TWR121ES, TWR80ES User Manual

99.95 Kb
Loading...

 

 

Table of Contents

Table of Contents

1

Important Safeguards

2

1.

Specifications

3

2.

Parts and Features

4

3.

Installation

5

4.

Operation

5

5.

Troubleshooting

8

6.

Limited Warranty

9

1

IMPORTANT SAFEGUARDS

When using an electrical appliance, basic precautions should always be followed, including the following:

BEFORE USE, PLEASE READ AND FOLLOW ALL INSTRUCTIONS FOR

THIS WINE COOLER

Do not use if the power supply cord is damaged. If damaged, it must be replaced by the manufacturer or a similarly qualified person.

This wine cooler is not intended for use by young children or infirm persons without supervision. Young children must be supervised to ensure they do not play with the appliance.

Ensure the cooler is unplugged before cleaning or if not in use.

To clean the cooler use only mild detergents or glass cleaning products. Never use harsh detergents or solvents.

It is not recommended to use this wine cooler with an extension cord or power strip. Please ensure that the appliance is plugged directly into the electrical outlet.

When positioning the wine cooler, ensure that there is at least a 2” clearance at the sides and a 4” clearance at the back of the cooler.

This will allow for adequate ventilation of heat from the back of the cooler.

This cooler is designed to store wine bottles. If food is placed inside, ensure that there is sufficient airflow between items. Also note that the temperature range for this cooler is optimized for wine and beverage storage. Perishable food items may require a different storage environment.

Do not place hot food or drinks into the wine cooler before they cool down to room temperature.

Close the cooler door immediately after putting in any items so the inside temperature will not rise dramatically.

Avoid subjecting the cooler to external heat sources or direct sunlight.

For a stable installation, make sure the cooler is placed on a flat, level, and solid surface.

Make sure that the surface on which the wine cooler is placed is strong enough to hold the wine cooler once it is fully loaded with wine bottles.

Do not place any other appliances on top of the wine cooler.

The wine cooler is an electrical appliance. To avoid injury or death from electrical shock, do not operate the wine cooler with wet hands, while standing on a wet surface, or while standing in water.

Do not use outdoors or in wet or moist conditions.

Do not turn the cooler upside down, on its side, or 45° or more off level.

Never pull the power cord to disconnect it from the outlet. Grasp the plug and pull it from the outlet.

Never lift or carry the wine cooler by the power cord.

Keep the power cord away from heated surfaces.

This wine cooler is designed for household, non-commercial use only.

Do not plug this cooler into the power socket before set up is completed.

2

An empty cooler can be dangerous for children. If disposing of the cooler remove gaskets, latches, lids and the entire door from your unused appliance, or take other action to ensure that children cannot become trapped inside.

If your model of wine cooler is equipped with a lock, take care to keep the keys away from children.

Do not cut or remove the third prong (the grounding prong) from the power cord.

The cord should be secured behind the unit and should not be left exposed or dangling.

Do not move this cooler without emptying it of its contents and securing the door in a closed position.

1.Specifications

Specifications

Model:

TWR282S

TWR181ES

TWR160S

TWR121ES

TWR80ES

 

28

18

16

12

8

Maximum

Standard

Standard

Standard

Standard

Standard

Wine

Wine

Wine

Wine

Wine

Capacity:

Bottles

Bottles

Bottles

Bottles

Bottles

Number of

6

4

3

5

1

Racks

Controls

Manual

Digital

Manual

Digital

Digital

Temperature

1

2

1

1

1

Zones

Maximum

 

 

 

 

 

Ambient

 

 

 

 

 

Temperature

85° F

85° F

85° F

85° F

85° F

for Operation

Input Power:

115 Volts /

115 Volts /

115 Volts /

115 Volts /

115 Volts

60 Hertz

60 Hertz

60 Hertz

60 Hertz

/ 60 Hertz

Power

65 Watts,

130 Watts,

65 Watts,

70 Watts,

70 Watts,

0.95

Consumption

0.95 Amps

1.9 Amps

0.95 Amps

0.95 Amps

Amps

Net Weight:

42 pounds

35 pounds

30 pounds

26 pounds

22 pounds

 

28

26 1/4"x13

20

 

11

Dimensions

1/10"x16

25 3/4"x10

3/8"x16

1/2"x18"x20

5/8"x19

9/10"x18

1/2"x19

(HxWxD):

1/2"

3/8"

9/10"

1/2"x20"

1/4"

 

Note:

 

Note:

Note:

 

 

 

Installation

 

 

Installation

 

of the

Installation

 

 

of the

 

included

of the

 

 

included

 

handle

included

 

 

handle

 

adds 1

handle

 

Dimensions

adds 1 3/4"

 

3/4" in

adds 2" in

 

Note:

in depth

 

depth

depth

 

3

2. Parts and Features

1

2

3

4

5

6

7

8

9

10

11

Please replace the text for number 8 with “Hinge cover”

1.

TEMPERATURE CONTROL KNOB

7.

WATER BOX

2.

LI GHT SWI TCH

8.

REAM COVER

3.

LI GHT

9.

MAGNETI C SEAL

4.

FAN MASK

10.

GLASS

5.

SHELF

11.

DOOR FRAME

6.

FOOT

 

 

Note: The above diagram is for reference onlyyour specific model of wine cooler will likely differ slightly from the diagram above (in light placement, bottle capacity, etc,) but its operation will be essentially the same.

1.Temperature control knob (only found on models with manual temperature control).

2.Light switch - push the switch to turn the light on or off.

3.Lightthe light is an energy-saving LED.

4.Fan maskthis protects the fan from accidental damage.

5.ShelfThe shelves easily slide in and out.

6.Footthese leveling legs screw in and out to help level your cooler on slightly unlevel surfaces.

7.Water boxthis is located outside the cooler, in the back. It catches water condensed from inside your cooler and holds it for evaporation.

8.Hinge coverthis covers and protects your door hinge. Remove it to access the hinge (if you want to reverse the door swing, for example [on models with reversible doors only]).

9.Magnetic sealthis gasket ensures a solid, airtight seal between the door and the cabinet.

10.Glassthe tempered glass protects your wine while displaying it.

11.Door frameopen and close your cooler by the door frame or the handle (if included on your model).

4

3.Installation

1.Remove all interior and exterior packaging.

2.Set up your wine cooler on a level surface. Make sure you have at least 2” clearance on both sides and 4” clearance in the back for ventilation.

3.Clean the interior surface with a little bit of lukewarm water and a soft cloth.

4.If you desire, install the handle as outlined below (if your cooler comes with a handle.)

5.Insert the power cord into the power socket. Make sure the power socket is a grounded 115V~AC / 60Hz socket.

6.Fill the wine cooler with your choice of wine bottles. Allow up to 24 hours of operation for the bottles to reach the desired temperature.

4.Operation

The Temperature Control

Your wine cooler uses one of two systems for adjusting the thermostat: Digital control-

Adjust the temperature using the up and down arrows located on the door of the wine cooler. While you are using the arrows, the temperature you are setting appears on the digital display. After you finish setting the temperature, the digital display will change to show the current temperature within the cooler.

Manual control-

Use the temperature adjustment knob located inside the wine cooler to change the temperature. Turn the knob to your desired temperature setting.

Interior Light

Your wine cooler has an interior light with an on/off switch. Turn the light on or off by pressing the switch. Note: on some models the temperature control switch is located inside the wine cooler. On others, the light switch is a button on the door.

Leveling Legs

Your wine cooler is shipped with leveling legs installed. To adjust these leveling legs, carefully lean the cooler to one side (make sure the cooler is empty and the door is secured) and unscrew the leveling legs to make them longer. Screw them in tighter to make them shorter.

Note: This cooler is not designed to operate with the leveling legs removed.

Bottle Capacity

Bottle capacity listed for your wine cooler is an estimated maximum capacity based on standard 750 mL wine bottles. For any other size bottles, capacity will vary.

5

Racks

Please note that the racks for your cooler have a top and a bottom. If you are having trouble fitting the stated number of bottles in the cooler (provided you have standard wine bottles), try flipping over one or more racks.

Also note that your wine cooler (depending upon the model) may have more “slots” for racks than the number of racks provided with the unit.

Handle (not standard on all models)

Some models of wine cooler are shipped with a towel bar-style handle. To install the handle, you will need a Phillips head screwdriver.

Look at the left side of the door frame, facing outwards. There are two small holes in the frame. Take the handle and hold it up to the door frame so that the holes in the handle line up with the holes in the door frame. While holding the handle with one hand, insert a screw through the top hole in the handle and screw it into the top hole in the door frame. Then insert a screw in the bottom hole in the handle and screw it into the bottom hole in the door frame.

Now insert the small “caps” included into the holes in the handle.

Note: On some models, the handle can be installed in either side of the door frame. To install the handle in the right side of the door frame, use a small flat head screwdriver to pry the caps out of their holes and follow the above directions.

Caution: If you do not feel comfortable making this installation yourself, have a qualified person do the installation for you.

Reversing the Door Swing (not standard on all models)

Your wine cooler comes with the hinges factory installed on the right side, so the door opens from the left side, swinging open to the right. On some models, the hinges can be reversed, to swing open from the right. To reverse the hinges, you need a flat head screwdriver and a Phillips head screwdriver.

Please call service for further instructions about reversing the door swing.

Note: dual door models do not feature reversible doors.

Caution: If you do not feel comfortable reversing the hinges yourself, have a qualified person do it for you.

Door Lock (not standard on all models)

Some models of wine cooler have a factory installed lock with keys. The lock is inset into the door. To lock your cooler, insert the key into the lock and turn the key clockwise until the metal tab is fully extended.

To unlock your cooler, insert the key into the lock and turn counter clockwise until the metal tab is fully retracted back into the door.

Caution: Make sure to keep the key in a safe place and out of reach of childrento prevent child entrapment.

Cleaning the Cooler

Turn the temperature control to “off” and unplug your cooler. Remove all items from it (wine bottles, shelves, etc.)

Wash the inside surfaces with a mild cleaner. We suggest you use either warm water alone, or a baking soda solution (try mixing 2 tablespoons of baking soda into a quart of water.)

Wash the wire shelves/trays (if you have them) with a mild detergent solution.

6

Clean the wooden shelves/trays (if you have them) with a soft cloth and some wood cleaner.

Wash the outside of the cooler with a mild detergent solution.

Dry any wet parts with a soft cloth.

Caution: make sure to minimize the exposure of water to any electronic or control parts.

Extended Periods of Disuse

Your cooler can operate safely for three weeks or longer without any adjustments. However, if the cooler is going to be left alone for several months, you should unplug it and clean it according to the instructions above. Pay special attention to drying the interior.

Now set the unit aside somewhere safe. You may want to crack the door slightly to prevent mold growth or odor.

Transporting the Cooler

The ideal packaging for you cooler is its original packaging. If possible, keep this packaging handy and repack the cooler as it was initially packed if you need to transport it.

If you do not have the original packaging:

Make sure the cooler is turned off and unplugged.

Remove all items.

Tape down the shelves and any other loose items within the cooler.

Shut the door and tape it closed.

Transport the cooler in a secure, upright position.

Protect the outside of the cooler with Styrofoam, cardboard, a blanket, etc.

Energy Efficiency Tips

Locate your cooler in the coolest area of the room.

Locate your cooler away from direct sunlight or any heat-producing sources. Let any hot foods or drinks cool before placing them inside the cooler.

7

5. Troubleshooting

Symptoms

Possible causes

Solutions

The wine

There is a power

Ensure the cooler is

failure.

plugged in and the

cooler does

The cooler is not

power outlet has power.

not turn on.

 

 

plugged in.

Replace the broken fuse

 

A house fuse has

 

in your fuse box or reset

 

blown or the circuit

the breaker.

 

breaker is tripped.

 

 

The cooler is placed

Keep the cooler away

 

too close to a heat

from sunshine or other

 

source.

heat sources.

The wine

The cooler does not

Make sure the wine

cooler will not

have sufficient

cooler has several

reach the

ventilation.

inches of ventilation on

desired

 

the sides and back.

temperature

The door is opened

Close the door tightly

 

 

too frequently or for a

and do not open the door

 

long period of time.

too frequently or for a

 

 

long period of time.

 

The environment is

Though the unit uses an

 

humid.

“auto-defrost” system,

 

The ambient

under certain conditions,

 

manual defrosting may

Frost is

temperature is too

be required. If frost

low.

builds up, you can try

forming in the

The door is being

running the cooler on a

wine cooler

warmer temperature

 

opened too

setting, minimizing the

 

frequently.

number of times you

 

 

open the door, or

 

 

unplugging the unit to

 

 

allow the frost to melt.

8

Symptoms

Possible causes

Solutions

 

The room

Run the cooler in the

 

temperature is higher

appropriate ambient

 

than the

temperature.

 

recommended

Minimize the number of

 

ambient temperature

 

(77°F).

times the door is

 

The door is being

opened.

The cooler

Make sure the door is

opened often.

turns on and

The door is not

completely closed.

off frequently.

Make sure the door

 

completely closed.

 

The door gasket is

gasket is properly

 

sealing.

 

not sealing properly.

Make sure the cooler

 

The cooler does not

 

has at least 2” on the

 

have the suggested

sides and 4” in the back

 

ventilation.

for clearance.

 

 

 

 

If the noise is from

The fan makes normal

 

the fan, it may be

fan noises when

 

normal operating

operatingthis is normal.

 

noise.

Make sure the cooler is

The cooler

The unit is not level.

on a level surface.

makes too

Popping or crackling

Some popping or

much noise.

 

noises are coming

crackling noises are

 

from the unit.

normal. They are caused

 

 

by expansion and

 

 

contraction of the inside

 

 

walls due to temperature

 

 

changes.

 

Your cooler is not

Make sure the cooler is

 

level.

on a level surface.

The door will

The door gasket is

Clean the door gasket.

dirty.

Make sure the door

not shut

The door gasket is

properly.

gasket is properly

 

malformed.

sealing.

 

The shelves are

Correctly install the

 

incorrectly installed.

shelves.

6. Limited Warranty

This EdgeStar product is warranted to be free from defective workmanship and materials for the first year following the date of original purchase.

Replacement parts will be supplied free of charge for the first year following the date of original purchase. Labor will be performed free of charge for the first 90 days following the date of original purchase.

WHAT IS COVERED:

This warranty applies to the original purchaser only, and only covers defects in workmanship experienced during operation of the product under normal

9

service, maintenance, and usage conditions. This warranty applies to the purchase and use of this product in residential settings within the United States of America.

WHAT IS NOT COVERED:

The following limitations apply to the coverage of this warranty:

Optional accessories, attachments, and appearance items are excluded from warranty coverage, as is shipping damage, and any damage caused by improper voltage or any other misuse, including abnormal service, handling, or usage.

This warranty does not cover normal wear and tear on parts or replacement of parts designed to be replaced, e.g. filters, etc.

This warranty does not cover service trips to deliver, pick-up, repair, or install the product, or to instruct in proper usage of the product.

Damages or operating problems resulting from abuse, operation outside environmental specifications, uses contrary to instructions provided in the owner’s manual, accidents, vermin, fire, flood, improper installation, unauthorized service, acts of God, unauthorized installation or modification, or commercial use are excluded from warranty coverage.

This warranty does not cover labor incurred 91 days or more after the date of original purchase.

This warranty does not cover use of EdgeStar products in commercial settings.

DESCRIPTION OF WARRANTY SERVICE:

All defective product components covered by this warranty will be repaired or replaced, at EdgeStar’s option, free of charge on a mail-in basis to EdgeStar’s authorized repair facility during the first 90 days from the date of original purchase.

All defective product components covered by this warranty will be repaired or replaced, at EdgeStar’s option, on a mail-in basis to EdgeStar’s authorized repair facility during the time period beginning on the 91st day from the date of original purchase and ending one year from the date of original purchase. During this time period, parts will be supplied free of charge, but labor charges will apply.

All replacement parts and units will be new, remanufacturered, or refurbished. All products and components replaced by EdgeStar under warranty service become the property of EdgeStar.

OBTAINING WARRANTY SERVICE:

Contact EdgeStar for troubleshooting assistance and warranty service authorization at 1-866-319-5473. Please have your order receipt available to confirm the date of purchase.

Once an EdgeStar authorized representative has confirmed that your product is eligible for warranty service, the product must be returned to an EdgeStar authorized repair facility.

The purchaser is solely responsible for prepaying all shipping related costs to and from the repair facility.

EdgeStar is not responsible for damage resulting from shipper mishandling or improper packaging.

10

Do not return defective product to the place of purchase.

THIS WARRANTY IS IN LIEU OF ANY OTHER WARRANTY, EXPRESS OR

IMPLIED, INCLUDING WITHOUT LIMITATION, ANY WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. TO THE EXTENT ANY IMPLIED WARRANTY IS REQUIRED BY LAW, IT IS

LIMITED IN DURATION TO THE EXPRESS WARRANTY PERIOD ABOVE. NEITHER THE MANUFACTURER NOR ITS DISTRIBUTORS SHALL BE

LIABLE FOR ANY INCIDENTAL, CONSEQUENTIAL, INDIRECT, SPECIAL, OR PUNITIVE DAMAGES OF ANY NATURE, INCLUDING WITHOUT LIMITATION, LOST REVENUES OR PROFITS, OR ANY OTHER DAMAGE

WHETHER BASED IN CONTRACT, TORT, OR OTHERWISE. SOME STATES DO NOT ALLOW THE EXCLUSION OF INCIDENTAL OR

CONSEQUENTIAL DAMAGES, SO THE ABOVE EXCLUSION MAY NOT APPLY TO YOU. THIS WARRANTY GIVES YOU SPECIFIC LEGAL RIGHTS. YOU MAY HAVE OTHER RIGHTS THAT VARY FROM STATE TO

STATE.

11