EdgeStar CENELEC CW1200 User Manual

3.1 Mb
Loading...

Use and Care Guide

TM

WASHER DRYER COMBO

COMBINADA LAVADORA SECADORA

COMBINE LAVE-LINGE/SECHE-LINGE

Contents

Appliance Registration

2

Care & Cleaning

 

14

Model and Serial Numbers

2

Vacation & Winter Storage

15

 

 

 

 

 

Safety Instructions

3

Safety Features

 

16

Installation Instructions

4~7

Fabric Care Symbols

 

17~18

 

 

 

 

 

Water and Electrical Requirements

8

Troubleshooting Guide

 

19~21

Operating Guide

9~10

Warranty

Backcover

 

 

 

 

 

Cycle Selection

11~12

Technical Services and Support

 

 

Detergent Guide

13

Call Center

 

 

For service call: 1.866.517.7827

 

 

Model CW1200

A 110 Volt Product

461305597

UL HARMONIZED

Help us Help You...

Before using your washer dryer read this book carefully.

It is intended to help you properly operate and maintain your new washer dryer.

Keep it handy for answers to your questions. If you don’t understand something or need technical assistance, please contact:

Technical Service and Support

101 3rd Street Kentwood, LA 70444 Phone: 1.866.517.7827

Write down the model and serial numbers

You will find them on a label fastened at the rear of the unit. Before using your washer dryer please write these numbers here.

Model Number

Serial Number

If you received a damaged washer dryer

Immediately contact the delivery company, dealer or the builder from which the unit was purchased. Damage is not covered under the manufacturers warranty.

Save Time and Money Before you request service

Check the trouble shooting guide (Pages 19 to 21). It lists causes of minor operating problems that you can correct yourself.

Energy - Saving Tips

The power and water consumption of your washer dryer can be minimized if you follow these suggestions.

Operate washer dryer only in full load. When you put in a partial cotton load, press the Super Rinse button. This automates the cycle for energy needs.

If you don’t need pre-wash avoid using cycle 1.

Always select cycle 3 for cotton load and keep temperature at 140.

Always soak or treat stains before the wash.

Always select the maximum rpm spin speed to reduce moisture content.

If you need Service

To obtain service see the warranty service page in the back of this book. We’ re proud of our service and want you to be pleased. If for some reason you are not happy with the service you receive, here are two steps to follow for further help.

FIRST contact the people who serviced your appliance. Explain why you are not pleased. In most cases, this will solve the problem. NEXT if you are still not pleased, write down all the details and call 1.866.517.7827. Explain your problem. A customer service representative will assist you.

Page 2

IMPORTANT SAFETY INSTRUCTIONS

Read all instructions before using this appliance

WARNING-- When using this appliance, always exercise basic safety precautions, including the following:

Use this appliance only for its intended purpose, as you will find described in this Use and Care Guide.

This washer dryer must be properly installed and located in accordance with installation instructions before it is used. If you did not receive an installation instructions sheet with this book, please call 1.866.517.7827to receive assistance in installation.

This appliance must be connected to a grounded metal, permanent wiring system, or an equipment grounding conductor must be run with the circuit conductors and connected to the equipment grounding terminal or lead of the appliance.

Connect to a properly rated protected and sized power supply circuit to avoid electrical overload.

Do not store or use combustible materials, gasoline or other

flammable vapors and liquids in the vicinity of this or any other appliance.

Use only detergents recommended for use in a front loading washer.

Do not wash steel, plastic, knives, or other hard or abrasive items, to avoid damage to the drum.

To minimize the possibility of injury

Do not touch the heating element during or immediately after use.

Do not abuse or tamper with controls.

Do not sit on or stand on the top of the appliance.

Close supervision is necessary if this appliance is used by or near children. Do not allow children to play inside, on or with this appliance. Dispose of discarded appliances and shipping or packing material properly. Before discarding a washer dryer remove the door.

Keep all washing detergents out of the reach of children, preferably in a locked cabinet. Observe all warnings on container labels to avoid personal injury.

To minimize the possibility of electric shock, disconnet this appliance from the power supply before attempting any maintenance

Do not reach into the appliance if the tub or drum is moving.

Do not install or store this appliance, where it will be exposed to extreme weather.

Do not dry clothing containing rubber, foam rubber or any rubber textured materials.

Note: Pressing the Power button does not disconnect the appliance from the power supply.

We recommend having a qualified technician service your appliance.

Gas is produced by the chemical action within the tub of your washer dryer. It can accumulate in the tub and/or

water pipes if hot water is not used for two weeks or longer. Some of these gases may be noxious or even combustible. To prevent the possibility of damage or injury, if you have

not used the appliance for two weeks or more, or moved moved into a residence in which the water pipes may not have been used for sometime, turn on all water faucets on all water faucets and allow them to run for several minutes before using this appliance.

In keeping with your best interest and safety, please read these carefully

Do not wash or dry clothes or any items that have been soaked in, spotted with, washed in, or cleaned in with gasoline, dry cleaning solvents or any other flammable or explosive substances,

this could lead to vapors that could ignite or explode.

Make sure that Dry cleaning solvents, gasoline, flammable or explosive substances are not added or get mixed with the wash water. These substances give off vapors that could ignite or explosive.

If your washer dryer has not been used for 2 weeks or more, there is a possibility of hydrogen gas being formed as in any closed hot water system. Make sure that you turn on the water supply system and let the machine run and drain for a few times. This will flush out the accumulated gas, if any. In the interest of safety please do not use an open flame and do not smoke during this time near the machine. Hydrogen gas is flammable.

Do not allow children to play near the machine.

Do nor reach into or attempt to open the machine while the drum is moving.

Do not tamper with controls.

Do not repair, replace or attempt to any form of sevicing, unless otherwise recommended in our user manual or carry out any instructions that you have not understood and not have skills to carry out. Always leave servicing to qualified personnel. Call 1.866.517.7827 for service needs.

Remove the door of your washer dryer before removing from service or discarded.

Do not use softeners or such forms of products to eliminate static unless recommended by the clothing manufacturer or by the softener manufacturer.

Do not dry items containing foam rubber textured materials.

If you are using a vented machine please keep the exhaust opening and surrounding area free from dust, dirt or lint at all times.

If you are using a vented machine please keep the exhaust duct and the inside of the appliance clean, free from dust, dirt or lint. Please check periodically.

Always keep away cooking oils and items exposed to cooking oils from your washer dryer. Contaminated items could create a chemical reaction that could possibly cause the load to catch fire.

The down lightning flash icon enclosed within a triangle is intended to warn the user that parts used inside this product risk electric shock topersons.

The exclamation icon within the triangle is intended to tell the user that important operating and sevicing

instructions accompany this product in paper form.

SAVE THESE

INSTRUCTIONS

Instructions Safety Important

Page 3

Installation sheet

Tools needed for Installation

•Multi wrench •Utility Knife •Channel Lock •Nut driver •Level

•Screw driver - Flat Blade

Parts supplied for installation.

Inlet Water Hose - One

Washers - Two

Cabinet Dimensions

C

Electrical

Refer to serial plate for specific electrical requirements

Water

Washer Dryer needs one standard 3/4 inch water supply faucet with a pressure between 30 to 120 pounds per square inch

Height 33.46 inch

Depth 21.65 inch

Width 23.62 inch

Page 4

Installation sheet

Proper installation is extremely important for your washer dryer to function correctly. When you first receive your washer dryer remove the box and packing material from the unit and inspect it carefully. If you find damage, immediately contact the delivery company and the company from which the unit was purchased.

STEP 1

PREPARE WASHER DRYER

1.Carefully remove the box and packaging materials from the outside of the washer dryer.

2.The drain hose and the power cord are secured on the back of the unit. Please unstrap them.

3.Unscrew and remove the four shipping bolts from the back of the washer dryer. Remove the four spacers that the bolts were attached to as well. Store these in a safe place in case you need to move the washer dryer in the future.

4.Loosen the two front adjustable legs to the desired level and lock nuts with spanner provided.

STEP 2

INSTALL WASHER DRYER

1.Place the drain hose in the drain. Do not allow the hose to kink or get damaged.

2.Do not install the drain hose into the drain in an air-tight connection; ensure there is some airflow possible.

3.For best performance the drain hose should not be restricted in any way.

4.The drain stand pipe should be not be higher than 2.6 ft and not lower than 1.64 ft.

5.Caution must be exercised to avoid collapsing or damaging the drain hose.

6.Strap the drain hose to the stand pipe.

7.Thread the inlet water hose to your cold water faucet connection. Tighten by hand until snug. Turn an additional 2/3rd turn by pliers.

8.Do not OVERTIGHTEN. Make sure the water line connection into the back of the unit is secure.

9.Turn on the cold water supply. Check all connections for leaks.

10.Plug the power cord into a grounded 110V, 60Hz approved electrical service protected by a 10 amp fuse or a comparable circuit breaker. The washer dryer is grounded through the third prong G ( refer to page 7. ).

11.Slide washer dryer into position. Make sure the drain hose remains routed straight

through the clip without collapsing or kinking.

12.Level washer dryer by turning the leveling legs in or out as necessary.

13.Tighten leg lock nuts.

14.The washer dryer must be level on four sides. To properly level use a carpenters level. It is always a good idea to check for level again after the first few washes and re-level if necessary.

Sheet Installation

Page 5

Installation Sheet

STEP 3

Final Installation Check List

1.Instructions and other items have been removed from the tub.

2.Shipping bolts have been removed.

3.Washer dryer is plugged in to an electric outlet and is properly grounded.

4.Water hose is connected to the faucet with inlet screens and washers.

5.Water is turned on and checked for leaks at faucet and machine end connections.

6.Drain hose is properly located into drain facility and is not collapsed or damaged.

7.Washer dryer has been properly levelled, all legs firmly on the floor and lock nuts engaged.

8.Water fills properly.

9.Test for proper operation by running the washer dryer through a complete cycle.

Test Run

1.Prepare your laundry

2.Select fabric type and Wash cycle Program. Refer to fabric care label for instructions.

3.Load cotton laundry into the drum. Load no more than 6 lbs. of laundry. Do not over load. ( Load unit approximately 2/3 visually full with similar fabrics ).

4.Load detergent in dispenser 2 for main wash. Follow detergent guide. Use low sudsing detergent.

5.Turn Wash Program knob to select the desired wash cycle.

6.Press the desired buttons.

7.Press dry time button to start drying.

8.Press Start.

9.Verify washer dryer is filling with water.

10.Verify washer dryer stops filling.

11.Verify drum is turning and the cycle is ON.

12.Verify unit rinses during the rinse cycle.

13.Verify unit spins during spin cycle.

14.Pull on the door to make sure it does not open.

15.Allow the cycle to finish. Release start button to unlock door. ( Allow 2-3 minutes for door to unlock ).

16.Open door, take out laundry.

17.Verify laundry is clean and dry. Fold and put away.

18.Repeat 1 to 8 for a second cotton load of 6 lbs. Do not overload.

19.Press Antiwrinkle button.

20.Press Start.

21.Check if your clothes are wrinkle free.

Make any corrections necessary to properly complete the installation. If in doubt, call tollfree 1.866.517.7827 for guidance on installation issues.

WARNING

Proper installation is the responsibility of the owner. Service performed as a result of improper setup, adjustment or connection are the responsibility of the installer.

Page 6

Installation sheet

Shipping Bolts

Spacers

Spacers

Bolts

Spacers

Leveling

Plug and Wall Receptacle

Plumbing

36 inches

inches

Max.

Min. 28

 

A

InstallationSheet

A. Should be 36 inches maximum

and 28 inches minimum.

 

B

Page 7

Water and Electrical Requirements

Electrical

110V, 60Hz 20/30 Amp fuse or circuit breaker

We recommend a dedicated circuit meant only for the washer dryer.

The washer dryer is equipped with a power cord and a three prong NEMA 5-20P plug.

Never use an extension cord.

An electrical ground is required on this appliance. This unit is equipped with a three prong grounded plug for use in a properly installed and grounded outlet.

Warning

Improper connection of the equipment grounding conductor can result in a risk of electric shock. Check with a qualified electrician or servicer if you are in doubt on grounding the appliance. Do not modify the plug provided with this appliance. Have a qualified electrician install the plug into the wall receptacle if the plug does not fit the outlet. To prevent risk or fire, electric shock or personal injury all wiring and grounding must be done in accordance with National Electrical Code, local codes and ordinances. The owner of the appliance is responsible for providing adequate electrical service for this appliance.

Grounding Instructions

This appliance needs a branch circuit requirement of 15 A. Always install on a branch circuit protected by 20A OR 30A ratings.

This appliance must be grounded. Grounding reduces and eliminates the risk of electric shock. This appliance is fitted with a proper grounding pins. Plug your washer dryer into a appropriate outlet that is installed and grounded in accordance with your state and country electrical codes.

Warning. Improper connection without grounding can result in electric shock. Check with your local qualified electrician or authorized service personnel, if in doubt.

Water

Water pressure of 30 to 120 p.s.i. is required to correctly fill the washer dryer. Pressure of less than 30 p.s.i. may cause a failure in the water valve or extended fill time. The inlet valve system may not shut off correctly. To avoid the possibility of water damage should a hose leak, always have faucets accessible. Turn off faucet when washer dryer is not in use.

Drain Facility

We recommend the height of the standpipe to be not higher than 2.63ft and not lower than 1.64 ft. Make sure the drain facility is capable of accepting the drain hose in a secure manner.

Flooring

For best performance the unit must be installed on a solidly constructed floor. Wooden floors need reinforcement to minimize machine vibration. Carpeting and soft tile surfaces are contributing factors in vibration and may cause the washer dryer to move slightly during the spin and dry cycles. Never install the washer dryer on a raised platform or on any weak structure. Proper flooring is the responsibility of the owner.

Location

We recommend the washer dryer not be installed in areas where water may freeze or boil. The washer dryer maintains some amount of water internally at all times in components like the valve, the pump, and in the hose areas. If this water freezes, it can damage belts, the pump, the motor, hoses or other components. Make sure the operating temperature is not below 60 degrees F. Your washer dryer is a ventless system, therefore it can be installed in a closet or in an alcove.

Warning

Your washer dryer is manufactured for operation on 60Hz AC approved electrical service. This model is not designed for use on 50 Hz AC electrical service. We do not recommend conversion.

For Technical Assistance or if your washer dryer requires service, replacement parts or accessories contact Technical Services and Support toll free at 1.866.517.7827.

Page 8

HOW TO USE YOUR WASHER DRYER

Making It

Easy For You

WASH PROGRAM

 

 

 

DRYER TIME

OFF

 

Max

 

 

 

OFF

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

EXTRA RINSE RINSE HOLD NO SPIN

SPIN SPEED

POWER

 

 

 

110

WOOL

 

Spin

1

Prewash

COTTON

 

 

 

 

 

 

 

 

 

17

 

2

Heavy Duty

 

 

 

 

 

 

 

 

 

 

 

 

3Super

 

 

 

30

 

 

 

Rinse

 

 

 

 

 

4Regular

 

 

 

 

 

 

100

 

16

 

 

 

 

 

5 Color

 

 

 

 

 

 

 

Regular15

 

 

 

 

 

Express

 

550 RPM

 

40

 

 

90

Dry

 

 

 

 

 

 

6Rinse

 

 

 

 

Spin

 

 

 

 

 

 

 

1200 RPM

 

 

 

 

 

14

 

 

 

 

 

 

 

 

 

 

50

 

 

80

Rinse13

 

 

 

 

 

 

 

 

 

DOOR LOCK

 

60

70

104

 

 

 

 

 

 

 

 

 

 

 

 

86

 

 

122

 

 

 

 

 

 

 

 

 

LIGHT

 

 

 

Express12

 

 

 

 

 

7 Softener

 

 

 

WASH TEMP

 

 

 

Gentle11

 

 

 

 

 

 

 

 

 

 

 

 

MEDIUM

10

9

 

8

Spin

 

 

 

 

 

 

 

 

Regular

 

 

 

 

 

 

 

 

OFF

 

 

 

Pre-Wash

Dry

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

PERMANENT

PRESS

Max. 140

HOT

110 V. 60Hz

Wash Program Knob

No Spin Button

Use this knob to select wash program of your choices. Always turn knob clockwise. To choose a program align the colored mark on the knob to the program number or text.

Dryer Timer Knob

Allows you to preset drying time. Based on your needs to make your laundry damp dry or dry. Refer to Drying table for details.

This is a Timer, not a Thermostat.

Wash Temperature Knob

Allows you to choose desired Temperature setting for water during the Wash cycle. Refer to clothing care label for guidance.

Lamp

Lights up when power is turned ON. Goes away when power is turned OFF.

Power Button

Push to turn power ON. Push again to turn OFF.

Keep button at OFF position for the door to open at the end of the cycle. Door will not open if this button is kept at ON position.

Door Handle

Push button to skip spin cycle. Do not press this button in automatic mode or the dryer will not turn.

Use this button for delicate fabrics only. Refer to clothing label instructions.

Super Rinse Button

Allows you to do a Super Rinse at full load or turns ON the Intelligent recognition system at Half load. Press when your laundry load is 6 lbs or less. The unit will set water level and adjust to the load intelligently. Do not press at full load.

Rinse Hold Button

Allows you to stop the wash cycle during the last rinse with the drum full of water. Use this button for synthetic and wool programs only. Push to activate. Some fabrics need to be drip dried only to prevent wrinkling. Press again stop.

Do not press this button in automatic model or the dryer will not turn ON.

Spin

Push to select 550 rpm. Release to select 1000 rpm.

Use the handle to open and close door. A click sound is heard when door is closed. This activates a safety device that prevents door from opening during wash/dry cycles. Always turn off the appliance, wait for 2-3 minutes. The warning light must go off before attempting to open door. Do not open the door during Wash or Dry cycles. This could lead to water spills and drum damage.

To How

Your Operate

Dryer Washer

Page 9

How To Operate Your Washer Dryer

Good Washing starts with hot water. To get your clothes clean and dry you need hot water. Your washer dryer automatically heats the water in the wash cycle.

AUTOMATIC PROGRAM

 

 

Select fabric type and program. Turn wash program knob to the

 

 

program number on the dial. Turn temperature knob to select

 

 

 

 

desired heat setting. Turn dryer knob to select time in minutes.

 

 

 

 

Press spin button to select 550 rpm or release for 1000 rpm.

 

 

 

 

Push start button. This program allows wash through dry automatically.

Wash Program Temperature

Dryer Timer

Spin

Start

When drying is complete drum stops turning. Press stop button,

 

 

 

 

open door and take away laundry. The cool down feature towards

 

 

 

 

the end of drying cycle prevents creases & wrinkles.

WASH ONLY

 

 

 

Choose the dry settings to fold and put away your clothes immediately.

 

 

 

In this program drying capacity must not exceed 6 lbs.

 

 

 

 

Select fabric type and program. Turn wash program knob to the

 

 

 

 

program number required. Turn temperature number to the desired

Wash Program Temperature

Dryer Timer

Start

 

heat setting. Turn dryer knob to off position. Press start button.

 

 

TIME DRY ONLY

Wash Program Dryer Timer

Spin

Start

WASH ONLY - NO SPIN

Wash Program Temperature

Dryer Timer No Spin

Start

WASH ONLY - RINSE HOLD

Wash Program Temperature

Dryer Timer Rinse Hold

Start

Turn wash program knob to dry cycle position. Turn dryer knob to select time in minutes. Press Spin button to select 550 rpm or release for 1000 rpm. Press start button.

Refer drying table to determine the correct time.

Alwais remember that time to dry varies by dampness and fabric type. Your dryer is constructed to deliver dry laundry that can be folded and put away immediately.

Select fabric type and program. Turn wash program knob to the program number required. Turn temperature number to the desired heat setting. Turn dryer knob to of position.

Press the No Spin button. Press the Start button.

In this program the machine skips spin cycle. It is meant for stopping the machine after rinse and drain. Use this button for delicate fabrics where the clothing label does not recommend spinning. Do not press No spin button in Automatic program, or the dryer will not turn on.

Select fabric type and program. Turn wash program knob to the program number required. Turn temperature number to the desired heat setting. Turn dryer knob to the off position.

Press the Rinse Hold button. Press start button.

This program is meant for pausing the machine after rinse without draining. In this program the machine stops after the last rinse with drum full of water. Press stop button, open the door and take out your laundry. Some fabrics need to be drip dried.

Refer clothing label to identify such fabrics.

Do not press the Rinse Hold button in Automatic Program, or the dryer will not turn on.

WASH ONLY - SUPER RINSE

Wash Program Temperature

Dryer Timer Super Rinse Start

Select fabric type and program. Turn wash program knob to the program number required. Turn temperature number to the desired heat setting. Turn dryer knob to the off position.

Press Super Rinse button. Press the Start button.

Press stop button at the end of the cycle to remove laundry.

In this program the machine runs a super rinse on your laundry. Do not press Super Rinse button in Automatic program, or the dryer will not turn on.

Page 10

Wash Cycle Selection

 

OFF

 

 

 

 

 

Spin14

 

 

 

6Rinse

 

 

 

 

 

 

 

 

 

Spin

1

Prewash

 

 

 

 

 

 

 

 

 

17

 

2

Heavy Duty

 

 

 

 

 

 

 

 

 

 

 

 

3Super

 

 

 

 

 

 

 

 

 

Rinse

 

 

 

4Regular

 

 

 

 

 

 

 

 

 

16

 

 

 

5 Color

 

 

 

 

 

 

 

 

 

Regular15

 

 

 

Express

 

 

 

 

 

 

 

 

 

Dry

 

 

 

 

 

 

What happens in each cycle?

 

 

 

Rinse13

 

 

 

 

 

 

 

 

 

Regular 9

 

 

8 Spin

 

 

 

 

 

 

 

 

 

Express12

 

 

 

7 Softener

 

 

 

 

 

 

 

 

 

Gentle11

 

 

 

 

 

 

 

 

 

 

 

 

10

 

 

 

 

 

 

 

 

 

 

 

 

 

Pre-Wash

Dry

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Wash

Fabric

Temperature

 

 

 

 

 

 

 

Wash Cycle

Drying

Load

Cycle Sequence

 

 

Time Minutes

Cycles

Type

ºF

 

 

 

Condition

 

 

 

 

 

 

 

 

(Approx)

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Pre-wash,

 

 

 

 

 

 

1

Cotton

 

Wash 12 lbs

4

times Wash,

 

 

 

 

Select Dry

104 140

3

Rinses & Spin,

 

155

Pre-wash

Whites

 

 

Dry 6 lbs

1

Rinse & Spin,

 

 

 

or Damp Dry

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Final Spin

 

 

 

 

 

 

2

 

 

 

 

4

Times Wash,

 

 

 

 

 

 

Cotton

140

Wash 12 lbs

3

Rinses & Spin,

 

140

Select Dry

Heavy

 

Very Dirty

 

Dry 6 lbs

1

Rinse & Spin,

 

 

or Damp Dry

 

 

 

 

 

Duty

Whites

 

 

 

Final Spin

 

 

 

 

 

 

 

 

 

 

 

3

Times Wash,

 

 

 

 

 

 

3

Cotton

140

Wash 12 lbs

3

Rinses & Spin,

 

120

Select Dry

 

Jeans

 

Dry 6 lbs

1

Rinse & Spin,

 

 

or Damp Dry

Super

 

 

 

 

 

 

 

 

 

Final Spin

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

3

Times Wash,

 

 

 

 

 

 

4

Cotton

122

Wash 12 lbs

3

Rinses & Spin,

 

120

Select Dry

Regular

Resistant

 

Dry 6 lbs

1

Rinse & Spin,

 

 

or Damp Dry

 

 

 

 

 

Colors

 

 

 

Final Spin

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Cotton

 

 

 

2

Times Wash,

 

 

 

 

 

 

5

104

Wash 12 lbs

3

Rinses & Spin,

 

105

Select Dry

 

Delicate

 

Dry 6 lbs

1

Rinse & Spin,

 

 

or Damp Dry

Color

 

 

 

 

 

Colors

 

 

 

Final Spin

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Rapid

Cotton

 

 

 

One Wash,

 

 

 

 

 

 

 

Wash 12 lbs

3

Rinses & Spin,

 

 

Select Dry

Wash

95

 

74

Assorted

 

Dry 6 lbs

1

Rinse & Spin,

 

 

or Damp Dry

 

 

 

 

 

 

Express

Colors

 

 

 

Final Spin

 

 

 

 

 

 

 

 

 

 

 

Pre-wash,

 

 

 

 

 

 

9

Synthetic

 

 

 

3

Times Wash,

 

 

 

 

Select Damp

104~140

 

6 lbs

3

Rinses & Spin,

 

110

 

Resistant

 

 

Dry

 

Pre-wash

Colors

 

 

 

1

Rinse & Spin,

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Final Spin

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Synthetic

 

 

 

3

Times Wash,

 

 

 

 

 

 

10

140

 

6 lbs

3

Rinses & Spin,

 

90

Select Damp

Regular

Assorted

 

1 Rinse & Spin,

 

 

Dry

 

 

 

 

 

 

 

 

 

Colors

 

 

 

Final Spin

 

 

 

 

 

 

 

 

 

 

 

2

Times Wash,

 

 

 

 

 

 

11

Synthetic

122

 

6 lbs

3

Rinses & Spin,

 

85

Select Damp

 

Quick

 

1

Rinse & Spin,

 

 

Dry

 

Gentle

 

 

 

 

 

 

 

Wash

 

 

 

Final Spin

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

12

 

 

 

 

One Wash,

 

 

 

 

 

 

Synthetic

104

 

6 lbs

3

Rinses & Spin,

 

64

Select Damp

Express

Delicate

 

1

Rinse & Spin,

 

 

Dry

 

 

 

 

 

 

 

 

Color

 

 

 

Final Spin

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

15

 

 

 

 

One Wash,

 

 

 

 

 

 

Wool

86

 

2.2 lbs

3

Rinses & Spin,

 

60

Do Not Dry

Regular

 

1

Rinse & Spin,

 

 

 

 

 

 

Final Spin

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

ashW

Selection Cycle

Page 11

Drying Options

Choose your drying options from the table below to suit your personal preference.

Fabric

Load

RPM

Dry

Damp Dry

Minutes

Minutes

 

 

 

 

 

 

 

 

Cotton &

6 lbs

1000

90

75

Linen

 

 

 

 

 

 

 

 

 

Cotton &

4.4 lbs

1000

80

65

Linen

 

 

 

 

 

 

 

 

 

Synthetic

3.3 lbs

850

90

75

& Delicate

 

 

 

 

 

 

 

 

 

Synthetic

2.2 lbs

850

70

55

& Delicate

 

 

 

 

 

 

 

 

 

Page 12

Detergent Guide

How to choose and use the right detergent

First, use only detergent specifically made for use in front load washers. Other types will cause over sudsing.

Second, use only low sudsing powder or liquid detergent. Performance of this machine will be adversely effected if high suds detergents are used. Third, check your water hardness. If your water is hard (7 grains or more) your detergent has to work harder.

Your water department can tell you how hard your water is. So can your county extension agent or your area’s water softener company. Just call and ask them how many grains of hardness are in your water.

How much detergent do you use? That depends. Is your water hard or soft? With hard water you need extra detergent to get your clothes clean. With soft water you need less detergent. Too much detergent can be harmful-potentially causing serious problems with your washer dryer. For this reason, it is always best to find out your water hardness and adjust your detergent usage.

Keep your detergent fresh. Under the sink isn't a good place to store detergent. Too much moisture will cause the powder to cake.

If your powder detergent gets older or lumpy throw it away. It won’t wash well. Old detergent often won’t dissolve. If you use a liquid detergent these precautions are not necessary because liquid detergents don’t lump as they age or come in contact with water.

You will find four compartments in your Washer Dryer dispenser. Pre-wash, Wash, Softener, Bleach.

Front load machines need much less detergent than top load washing machines.

Follow detergent manufacturer instructions for front load machines. Detergent is flushed automatically into the drum from the detergent dispenser. Over sudsing will cause your unit to malfunction. Suds may rise through detergent dispenser and may spill on your floor, so, be very careful in choosing the detergent quantity based on laundry load, fabric type and soil/stain conditions.

Always choose a low sud detergent for this machine.

Bleach Recommendation

Always dilute bleach before using.

 

Excessive/ Frequent use of bleach can damage

 

clothes.

 

Bleaching Whitens clothes, removes problem

 

stains, deodorizes & sanitizes.

Detergent

Use discretely and always follow bleach

 

manufacturer instructions.

 

Do not add bleach while rinsing. Pour bleach in

 

detergent dispenser 3.

 

Do not overfill bleach. This can damage clothes.

Guide

Fabric Softener Recommendation

 

All fabrics benefit by the use of softeners. We

 

recommend use of softener to reduce the "clinging"

 

effect in synthetics and make laundry feel soft.

 

Pour the softener in detergent dispenser 4.

 

Do not overfill. Excessive use of softener may

 

affect wash results. Always follow softener

 

manufacturer instructions.

 

1 2 3 4

1 - Pre Wash 1.76 ounce Max.

2 - Main Wash 4.41 Ounce Max.

3 - Bleach 2.71 Fluid Ounce

4 - Softener 2.71 Fluid Ounce Max.

Page 13

Care and Cleaning

!Unplug electric power cord before cleaning washer dryer to avoid shock.

Cleaning the Exterior

Use a soft damp cloth or sponge to wipe up any spills. Occasionally wipe the outside of your unit to keep it looking new.

Cleaning the Interior

The drum is made of stainless steel so it will no rust. However, specks of rust can be caused by small metal articles like safety pins, paper clips or belt buckles washed in the washer dryer. The drum should be cleaned regularly. Not cleaning the drum may lead to a build up of scale

clogs, limescale and dirt leading to replacement. Clean the drum by using chlorine bleach. Mix one cup of bleach and two scoops or caps of detergent. Pour this into detergent drawer

compartment two. Choose automatic wash program, rotate Wash program knob to position four. Rotate water Temperature knob to 140 ºF position. Push Power button to start. Repeat if necessary. To remove hard water deposits or scales, use washer safe labeled cleaners. Wipe drum thoroughly with a damp cloth. Apply a liquid nonflammable household cleaner to stained areas and wipe with a soft cloth to remove stains or colors. Never use steel wool. Use descaling agents suitable for use on stainless steel. Some descalers contain chemical components that can attack parts of your washer dryer.

Be careful in selecting the right descaler. After cleaning run a cycle with plain water to remove any residual agents before inserting laundry.

Water Inlet Hose

Replace hose after five years of use to reduce risk of hose failure. Periodically inspect and replace if bulges, kinks, cuts, wear or leaks are found. Mark the date of replacement on the hose with a permanent marker.

Lint Filter

! To avoid water spills during removal of lint filter, place a bowl or tray under filter assembly.

The lint filter is located at the bottom right corner. Always run the unit on spin mode before removing the lint filter to drain away residual water. Place a bowl or tray under the lint filter area to catch any residual water. We recommend this strongly to avoid water spills on your floor. Open the bottom panel. Unscrew and remove the lint filter. Run water on the filter to clean away detergent or softener residue. Rinse with hot water, dry using a clean towel and reinsert the filter back. Turn it clock wise and lock it in

position. We recommend cleaning after every 25 full loads. It is not necessary to clean the lint filter after every load.

Detergent Drawer

Pull the detergent drawer out. Wash all compartments under running water. Clean the recess with an old toothbrush. Make sure all detergent accumulations are removed. Use a jet of running hot water to flush out residues. Replace the drawer and run a rinse cycle without laundry.

Page 14

Vacation & Winter Storage

Install and store your washer/dryer where it will not freeze. Because some water may stay in the hoses and other parts and components, freezing can damage your washer dryer. If storing or moving your washer dryer during freezing weather, winterize it.

Nonuse or Vacation care

If you are going away on vacation or not using your washer/dryer for an extended period of time, you should....

Unplug washer/dryer or disconnect power

Turn off water supply. This helps avoid accidental flooding due to a water pressure surge while you are away.

To Winterize Washer Dryer

Shut off water tap.

Disconnect and drain water inlet hose.

Fill all four detergent drawer compartments with RV-type antifreeze. Run washer dryer on Program 4 for about 30 seconds to mix antifreeze in water. Unplug washer dryer or disconnect power.

To Use Washer Dryer Again

Flush out Water pipe and hose.

Reconnect Water inlet hose.

Turn on water tap.

Plug in washer dryer or reconnect power

Run washer dryer through a complete automatic cycle. Choose program four position on the dial.

Load the detergent drawer compartment two with 4.41 ounces of low sudsing detergent to clean out anti freeze.

Note: Please make sure it is safe to discharge antifreeze into your drain pipe before doing so.

To Transport the Washer Dryer

Shut the water tap.

Disconnect and drain water inlet hose.

Disconnect drain hose from the drain system.

If your washer/dryer is moved during freezing weather, winterize it before moving.

Unplug washer/dryer or disconnect power.

Wash lint filter.

Make sure leveling legs are secure.

Place inlet hose into the drum.

Drape power cord and drain hose over edge and secure it firmly with tape.

Insert shipping bolts and spacers.

Use masking tape to secure washer

dryer door.

Reinstalling your Washer Dryer

Follow installation instructions as given. Run the washer dryer through an automatic cycle. Select program four. Use one scoop or cap full of detergent to remove the antifreeze if used. Load detergent in compartment two.

and Vacation

Storage Winter

Page 15

Safety Features

We Care For You...

For the protection of your family and loved ones your washer dryer is equipped with many safety features.

Child Safe Door

An electromechanical safety device in the door prevents it from opening during operation. Door will not open until the unit is shut down and the power button is turned off.

Washer Motor

A thermal safety device protects the motor from overload or underload giving the motor long life.

Temperature

A safety thermostat prevents excessive water temperature. Water will not heat if the water level is inadequate, water from the tap stops flowing or the tap is not turned ON. The machine will not start if prescribed water level is not available.

Water Spills

The filling valve stops if the water inlet filter is clogged or if the drain pump motor malfunctions. This protects your flooring, carpets, and rugs from water spills.

Safe Areas

By design, access is denied to children/adults reaching into the door or touching the pump motor filter while the unit is ON.

Fuse

A safety fuse built into the unit prevents excessive electrical overload.

Plug

Your washer dryer is equipped with a grounded plug to protect against leakage currents. System and equipment are both grounded by the plug.

Page 16

Fabric Care

Care Label Guide

The following information is provided by U.S. Federal Trade Commission as part of Project Clean. The symbols appearing on garment labels provide care instructions from the garment manufacturer. These symbols seen on the fabric serve as minimum laundering instructions to indicate washing, bleaching, drying, ironing and dry cleaning. Additional symbols or words or both may be used to clarify the instructions.

The water temperatures listed below are provided as a guideline. Actual water temperatures obtained in the home depend on washing machine settings, regional supply temperatures and water heater settings.

? It’s time to wash

new clothes that you brought last week and you don’t undestand a care label?

WASH

Normal

Care information tags are available on most clothes sold in the United States. These written instructions normally give a single care method for your garment. When an international care symbol tag is also present, all care methods will usually be shown. We

are happy to present the international symbol guide as a handy reference to

help you select a correct wash and dry program that supports the care method prescribed by the garment manufacturer.

Permanent Press/Wrinkle Resistant

Gentle/Delicate

Hand Wash

Water Temperature 120 ºF (Hot)

Water Temperature 105 ºF (Warm)

Water Temperature 85 ºF (Cold/Cool)

Warning: Do Not Wring

Warning: Do Not Wash

Care Fabric

Page 17

Fabric Care

BLEACH

Any Bleach (when needed)

Only non-chlorine bleach (when needed)

Warning: Do Not Bleach

DRY

Dry

Normal

Permanent Press/Wrinkle Resistant

Gentle/Delicate

Heat Setting: High

Heat Setting: Medium

Heat Setting: Low

Special Instructions:

Line Dry/Hang to Dry

Special Instructions: Drip Dry

Special Instructions: Dry Flat

Special Instructions: Dry in Shade

Warning: Do Not Dry (used with do not wash)

Warning: Do Not Tumble Dry

IRON

Iron

High

Medium

Low

Warning: Do Not Iron

Warning: No Steam

DRY-CLEAN

Dry Clean

Any Solvent

Dry Clean - Normal Cycle: Any Solvent

Except Trichloroethylene

Dry Clean - Normal Cycle: Petroleum

Solvent Only

Professionally Dry-clean: Reduce Moisture

Professionally Dry-clean: Short Cycle

Professionally Dry-clean: No Steam Finishing

Professionally Dry-clean: Low Heat

Warning: Do Not Dry-clean

Page 18

Questions?

Use This Troubleshooting Guide

PROBLEM

Washer won’t fill, rinse or drum will not turn

Drum does not fill, but water is flowing

Washer dryer stops

Washer won’t drain

Washer continues to fill or drain or the cycle seems stuck

Washer makes noise

POSSIBLE CAUSE AND REMEDY

Is power cord plugged into a 110V power receptacle?

Is Wash Program knob pointing to the correct program number?

Is water inlet hose kinked?

Is water pressure at the tap correct? Is the tap ON?

Is the door closed?

Is the fuse blown or circuit breaker tripped?

Are shipping bolts and spacers removed?

Are knobs rotated clock wise?

Is your Wash Program knob working correctly?

Is your drain hose fixed at the correct height?

Is the power cord plugged into a 110V power receptacle?

At the start of the cycle water inflow is low and is absorbed by the laundry quickly. This creates a perception that water is not flowing. This is normal, allow the program and the cycle to continue.

Is power cord plugged into a 110V power receptacle?

Are all knobs correctly rotated? Do they point to the program?

Is water inlet hose blocked or kinked? Is the tap on?

Is there electrical power at the wall receptacle?

Call an electrician to check the wall socket.

Are you using an extension cord? Do not use an extension cord.

Is the drum overloaded with laundry?

Is the lint filter clogged? ( Do not open while unit is full of water).

Is the drain hose clogged? Is the end of drain hose more than

2.63ft above the floor?

Is the lint filter clogged? ( Do not open while unit is full of water).

See installation instructions for proper installation of drain hose.

Is the door open?

Are there excessive suds?

Is your voltage low? Check your electrical service or call an electrician. Do not use an extension cord.

Is the end of the drain hose more than 2.63 ft above the floor?

Is there a air gap in the drain hose?

Is the lint filter clogged? ( Do not open while unit is full of water).

Are all knobs correctly positioned?

Is the unit plugged into a 110V power receptacle?

Is voltage low? Check electrical service or call an electrician.

Are shipping bolts and spacers removed?

Are gears engaging? These are normal washer dryer noises.

Coins or safety pins or other metal items may be in the drum

Heavy wash loads can produce a thumping sound. This is normal.

Is the Washer Dryer levelled? Are all four feet resting firmly on the floor?

Adjust leveling legs if necessary.

Is your flooring correct? Refer page 8.

Guide Troubleshooting

Page 19

Troubleshooting Guide

PROBLEM

Washer/Dryer leaks

Detergent dispenser clogged

Load too wet

Residue or lint on load

Stains after wash

Load is wrinkled

POSSIBLE CAUSE AND REMEDY

Is water inlet hose tight? Are all hose washers properly seated?

Is the drain hose clamped and properly installed?

Is the sink or drain clogged?

Was too much detergent used? Excessive suds will cause

the unit to overflow.

Is the unit leveled and resting firmly on the floor?

Check leveling and adjust. Check household plumbing for leaks.

Check filter cap is closed tightly? Is trim in place?

Check detergent dispenser for clogs.

Did you use excessive detergent? Is the detergent low sudsing? Always measure and use low sudsing detergents. Pour it carefully and wipe up spills.

Did you pour fabric softener in the fabric softener dispenser?

Did you pour bleach into its correct dispenser?

Did you use a powdered bleach? Use liquids only.

Is your wash cycle program correct? See pages 11 and 12.

Did you select 1000 rpm spin speed?

Is the temperature setting correct?

Did you turn your knobs correctly? Do they point correctly?

Did you press Rinse and Hold button? Is voltage correct?

Did you sort your laundry properly?

Did you overload the washer/dryer? Lint can be trapped in the load if overloaded. Wash smaller loads.

Was paper or tissue left in the pockets?

Did you use enough detergent? Follow detergent guide.

Did you set temperature correctly?

Cold water will not dissolve detergent completely.

Did you clean lint filter?

Did you follow the guide when adding detergents? Refer page 13

Use just enough detergent to remove soil and become soluble.

Use correct fabric softener depending on fabric type.

Is water in your tap hard? Install an ion filter if possible.

Did you properly sort the load? Is color bleeding? Mix only if color does not run.

Did you leave clothes in the drum at the end of the cycle? Some dyes transfer during dry cycle. Make sure color does not run.

Is detergent dispenser clean? Clean if necessary.

Is your wash cycle correct? Is the drum overloaded?

Did you remove clothes after the wash cycle, hang dry and then use the dryer?

Allow the unit to run from wash to dry without interruption.

Check the fabric type-some fabrics are drip dry only.

Did you set the temperature knob correctly? Excess

temperature may cause the load to wrinkle.

Guide Troubleshooting

Page 20

Troubleshooting Guide

PROBLEM

POSSIBLE CAUSE AND REMEDY

oadLis tangled or twisted

Fabric damage

Washer does not dry

Door does not open

Did you overload drum? Loads should move freely during washing.

Did you place laundry loosely into the drum? Do not wrap clothing

together.

Were sharp items removed from the pockets before washing?

Empty pockets, zip zippers, snap or hook fasteners before washing.

Were strings and sashes tied to prevent tangling?

Were items previously damaged? Mend rips & broken threads in seams before washing.

Did you overload drum? Laundry should move freely during washing.

Did you pour bleach directly on the laundry? Did you follow

clothing care label instructions?

Did you overload drum? Is your washer dryer draining properly?

Is your laundry load too small to tumble properly? Add more laundry.

Is the water turned on? The dryer uses cold water during the dry cycle to create the condensation process.

Is the unit connected to cold water?

Check that washer dryer is off. Have you pressed Stop? Wait for about three minutes.

Gently hit the door to cause a vibration to release the safety device.

Guide Troubleshooting

To receive more information call toll-free 1.866.517.7827

Page 21

Notes

Page 22

WARRANTY

This EdgeStar product is warranted to be free from defective workmanship and materials for the first year following the date of original purchase. Replacement parts will be supplied free of charge for the first year following the date of original purchase. Labor will be performed free of charge for the first 90 days following the date of original purchase.

COMMERCIAL USE WARRANTY EXCLUSIONS

If used in a commercial environment, this EdgeStar product is warranted to be free from defective workmanship and materials for the 90 days following the date of original purchase. Replacement parts will be supplied free of charge and labor will be performed free of charge for the 90 days following the date of original purchase.

MULTI-FAMILY USE WARRANTY EXCLUSIONS

If used in a multi-family environment, this EdgeStar product is warranted to be free from defective workmanship and materials for the first year following the date of original purchase. Replacement parts will be supplied free of charge for the first year following the date of original purchase.

WHAT IS COVERED:

This warranty applies to the original purchaser only, and only covers defects in workmanship experienced during operation of the product under normal service, maintenance, and usage conditions. This warranty applies to the purchase and use of this product in residential settings within the United States of America.

WHAT IS NOT COVERED:

The following limitations apply to the coverage of this warranty:

Optional accessories, attachments, and appearance items are excluded from warranty coverage, as is shipping damage, and any damage caused by improper voltage or any other misuse, including abnormal service, handling, or usage.

This warranty does not cover normal wear and tear on parts or replacement of parts designed to be replaced, e.g. filters, etc.

This warranty does not cover service trips to deliver, pick-up, repair, or install the product, or to instruct in proper usage of the product.

Damages or operating problems resulting from abuse, operation outside environmental specifications, uses contrary to instructions provided in the owner’s manual, accidents, vermin, fire, flood, improper installation, unauthorized service, acts of God, or unauthorized installation or modification are excluded from warranty coverage.

This warranty does not cover labor incurred 91 days or more after the date of original purchase. Note the warranty exclusions listed above if this product is used in a commercial or multi-family setting.

Page 23

DESCRIPTION OF WARRANTY SERVICE:

All defective product components covered by this warranty will be repaired or replaced, at EdgeStar’s option, free of charge on a mail-in basis to EdgeStar’s authorized repair facility during the first 90 days from the date of original purchase.

All defective product components covered by this warranty will be repaired or replaced, at EdgeStar’s option, on a mail-in basis to EdgeStar’s authorized repair facility during the time period beginning on the 91st day from the date of original purchase and ending one year from the date of original purchase. During this time period, parts will be supplied free of charge, but labor charges will apply. All replacement parts and units will be new, remanufacturered, or refurbished.

All products and components replaced by EdgeStar under warranty service become the property of EdgeStar.

Please note that the term of the warranty does not extend beyond 90 days for units used in commercial settings.

Please note that labor is not included for units used in a multi-family setting.

OBTAINING WARRANTY SERVICE:

Contact EdgeStar for troubleshooting assistance and warranty service authorization at 1-866-517- 7827. Please have your order receipt available to confirm the date of purchase.

Once an EdgeStar authorized representative has confirmed that your product is eligible for warranty service, he or she will discuss your options for service.

Within the first 90 days after the date of purchase, in-home service will be provided free of charge within the lower 48 United States (excluding units used in multi-family settings.)

Do not return defective product to the place of purchase.

This warranty is in lieu of any other warranty, express or implied, including without limitation, any warranty of merchantability or fitness for a particular purpose. To the extent any implied warranty is required by law, it is limited in duration to the express warranty period above. Neither the manufacturer nor its distributors shall be liable for any incidental, consequential, indirect, special, or punitive damages of any nature, including without limitation, lost revenues or profits, or any other damage whether based in contract, tort, or otherwise. Some states do not allow the exclusion of incidental or consequential damages, so the above exclusion may not apply to you. This warranty gives you specific legal rights. You may have other rights that vary from state to state.

Page 24